Phy 121
Your 'cq_1_00.1' report has been received. Scroll down through the document to see any comments I might have inserted, and my final comment at the end.
** **
Begin by forming an opinion of the following questions; for the moment you may ignore the computer screen in the video. You don't have to write anything down at this point; just play with the videos for a couple of minutes and see what you think:
• Is the tape speeding up or slowing down? Speeding up
• Is the pendulum speeding up or slowing down? Speeding up
• Which speeds up faster, the tape or the pendulum? The tape
• What is going to limit your ability to precisely measure the positions of these objects? The fact that I’m not watching in person and human error in general.
The computer in the video displays the running 'clock time', which is accurate to within something like .01 second. Think about how the information on this screen can help answer the above questions.
You don't have to think about the following right now, so I'm going to make it easy to ignore by putting it into small type. There is a parallax issue here. You don't even have to know what this means. But if you do, and if you want the information, here it is:
• The measuring tape is pretty much parallel to the paths of the pendulum and the tape roll, about 5 inches further from the camera than the path of the pendulum, and the path of the ball is about halfway between the two. The camera is about 5 feet away from the system.
The problem:
You don't have to actually do so, but it should be clear that if you wished to do so, you could take several observations of positions and clock times. The main point here is to think about how you would use that information if you did go to the trouble of collecting it. However, most students do not answer these questions in terms of position and clock time information. Some students do not pause the video as instructed. To be sure you are thinking in terms of positions and clock times, please take a minute to do the following, which should not take you more than a couple of minutes:
• Pick one of the videos, and write down the position and clock time of one of the objects, as best you can determine them, in each of three different frames. The three frames should all depict the same 'roll' down the ramp, i.e. the same video clip, at three different clock times. They should not include information from two or more different video clips.
• For each of the three readings, simply write down the clock time as it appears on the computer screen, and the position of the object along the meter stick. You can choose either object (i.e., either the pendulum or the roll of tape), but use the same object for all three measurements. Do not go to a lot of trouble to estimate the position with great accuracy. Just make the best estimates you can in a couple of minutes.
Which object did you choose and what were the three positions and the three clock times?
answer/question/discussion: ->->->->->->->->->->->-> (start in the next line):
I chose the tape. The three positions and clock times are as follows; 59.359 and approx 5in, 59.687 and approx 12 in, 60.125 and 24in. All of these events occurred very quickly.
#$&*
In the following you don't have to actually do calculations with your actual data. Simply explain how you would use data of this nature if you had a series of several position vs. clock time observations:
• If you did use observations of positions and clock times from this video, how accurately do you think you could determine the positions, and how accurately do you think you would know the clock times? Give a reasonable numerical answer to this question (e.g., positions within 1 meter, within 2 centimeters, within 3 inches, etc; clock times within 3 seconds, or within .002 seconds, or within .4 seconds, etc.). You should include an explanations of the basis for your estimate: Why did you make the estimate you did?
answer/question/discussion: ->->->->->->->->->->->-> (start in the next line):
I would graph the points on a line graph. By doing this, I could predict which object was going faster and etc. It would be hard to accurately determine the readings and the clock time because the measuring tape is so far away. I would estimate that the readings would have a marginally high percent error.
#$&*
• How can you use observations of position and clock time to determine whether the tape rolling along an incline is speeding up or slowing down?
answer/question/discussion: ->->->->->->->->->->->-> (start in the next line): If the tape has traveled a farther distance in less time than that means it is speeding up, and vice versa.
#$&*
• How can you use observations of position and clock time to determine whether the swinging pendulum is speeding up or slowing down?
answer/question/discussion: ->->->->->->->->->->->-> (start in the next line):
The same answer applies here as for the previous question.
** **
Approximately 20 mins.
** **
&#This looks good. Let me know if you have any questions. &#
&#Your work is mostly correct, and I believe you will understand everything after reading the document in the link below. You will be directed to submit a revision; however unless you have questions or comments, the revision is not necessary. Just be sure you understand all the important details in the document. &#