course mth 173 time 120pmdate 2/5/10 If you are unable to attempt a solution, give a phrase-by-phrase interpretation of the problem along with a statement of what you do or do not understand about it. This response should be given, based on the work you did in completing the assignment, before you look at the given solution.
.............................................
Given Solution: This derivative will tell us the rate at which the volume changes with respect to the diameter of the pile. On a graph of the y = k x^3 curve the slope of the tangent line is equal to the derivative. Through the given point we can sketch a line with the calculated slope; this will be the tangent line. Knowing the slope and the change in x we easily find the corresponding rise of the tangent line, which is the approximate change in the y = k x^3 function. In short you use y' = 3 k x^2 to calculate the slope, which you combine with the change `dx in x to get a good estimate of the change `dy in y. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): The derivitive is found to use and then this creates a slope that is used to calculate the equation. ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q Query class notes #08What equation do we get from the statement 'the rate of temperature change is proportional to the difference between the temperature and the 20 degree room temperature'? What sort of graph do we get from this equation and why? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: We get an linear graph using the information given to create a graph.It would be linear because the problem wants to graph room temp and temp change. confidence rating #$&*: 2 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: STUDENT SOLUTION AND INSTRUCTOR COMMENT: Would it be y = x-20 degrees., with y being the rate of temperature change and x being the temperature?You get a graph with a straight line and a slope of -20? INSTRUCTOR COMMENT: Not a bad attempt. However, you wouldn't use y to represent a rate, but rather dy /dt or y'. An in this example I'm going to use T for temperature, t for clock time. Read further. We need a graph of temperature vs. clock time, not rate of change of temperature vs. clock time. The difference between temperature and room temperature is indeed (T - 20). The rate of change of the temperature would be dT / dt. To say that these to our proportional is to say that dT / dt = k ( T - 20). To solve the situation we would need the proportionality constant k, just as with sandpiles and other examples you have encountered. Thus the relationship is dT / dt = k ( T - 20). Since dT / dt is the rate of change of T with respect to t, it tells you the slope of the graph of T vs. t. So the equation tells you that the slope of the graph is proportional to T - 20. Thus, for example, if T starts high, T - 20 will be a relatively large positive number. We might therefore expect k ( T - 20) to be a relatively large positive number, depending on what k is. For positive k this would give our graph a positive slope, and the temperature would move away from room temperature. If we are talking about something taken from the oven, this wouldn't happen--the temperature would move closer to room temperature. This could be accomplished using a negative value of k. As the temperature moves closer to room temperature, T - 20 becomes smaller, and the steepness of the graph will decrease--i.e., as temperature approaches room temperature, it will do so more and more slowly. So the graph approaches the T = 20 value more and more slowly, approaching as an asymptote. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): Ok the tempature difference becomes smaller as it approaches the assymtote. This is in fact not a linear graph but an exponential decay in fact. ------------------------------------------------ Self-critique rating #$&*:2.5 ********************************************* Question: `q Query Inverse Functions and Logarithms, Problem 7. Construct table for the squaring function f(x) = x^2, using x values between 0 and 2 with a step of .5. Reverse the columns of this table to form a partial table for the inverse function. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: (0,0) (.5,.25) (1,1) (1.5,2.25) (2,4) confidence rating #$&*: 2.5 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: STUDENT SOLUTION: We get the following ordered pairs: Table 1-- (0,0),(.5,.25),(1,1),(1.5,2.25),(2,4) Table2--(0,0),(.25,.5),(1,1),(2.25,1.5),(4,2). Plot the points corresponding to the table of the squaring function, and plot the points corresponding to the table of its inverse. Sketch a smooth curve corresponding to each function. The diagonal line on the graph is the line y = x. Connect each point on the graph of the squaring function to the corresponding point on the graph of its inverse function. How are these pairs of points positioned with respect to the y = x line? ** The segments connecting the graph points for function and for its inverse will cross the y = x line at a right angle, and the graph points for the function and for the inverse will lie and equal distances on either side of this line. The graph of the inverse is therefore a reflection of the graph of the original function through the line y = x. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): Ok I understand why that if the tables are inversed why they would be. ------------------------------------------------ Self-critique rating #$&*:2.5 ********************************************* Question: `q **** 8. If we reversed the columns of the 'complete' table of the squaring function from 0 to 12, precisely what table would we get? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The complete table of the squaring function would go from 0 to 144 confidence rating #$&*: 2 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** We would get a table of the square root function with the first column running from 0 to 144, the second column consisting of the square roots of these numbers, which run from 0 to 12. ** Sketch the graphs of the functions described by both tables. 9. If we could construct the 'complete' table of the squaring function from 0 to infinity, listing all possible positive numbers in the x column, then why would we be certain that every possible positive number would appear exactly one time in the second column? &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary):ok yes we would be certain that all positive numbers would appear. ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q ** The table you constructed had only some of the possible x and y values. A complete table, which couldn't actually be written down but can to an extent be imagined, would contain all possible x values. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: Yes it would because as the squaring funtion is represented graphically the values of x and y are growing exponentially and growing in the positive direction. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: We could be sure because every number is the square of some other number. If the function was, for example, x / (x^2 + 1) there would be a great many positive numbers that wouldn't appear in the second column. But this is not the case for the squaring function. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary):ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q What number would appear in the second column next to the number 4.31 in the first column? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The number 18.576 would appear as the squared resultant. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** In the original table the second column would read 18.57, approx.. This is the square of 4.31. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary):ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q What number would appear in the second column next to the number `sqrt(18) in the first column? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The number 18 would appear because the second columb is the squared version of the number and then you take the squareroot of it and it is 18. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** 18 would appear in the second column because the square of sqrt(18) is 18. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary):ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q What number would appear in the second column next to the number `pi in the first column? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The number pi^2 would appear confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** The number would be `pi^2 ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q What would we obtain if we reversed the columns of this table? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: You would have the square roots on the left and squared on the right confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: STUDENT ANSWER: We would obtain the inverse, the square roots of the squares being in the y colume and the squared numbers being in the x column. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary):ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q What number would appear in the second column next to the number 4.31 in the first column of this table? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: you would have 18.5761 confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: This number would be 4.31 squared,18.5761. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary):ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q What number would appear in the second column next to the number YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: What is the number? confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: `pi^2 in the first column of this table? &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): This quiestion didn’t have a number. ------------------------------------------------ Self-critique rating #$&*:0 *&$*&$ ********************************************* Question: `q STUDENT ANSWER: This number would be the square root, 'pi YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: ok confidence rating #$&*: 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: What number would appear in the second column next to the number -3 in the first column of this table? -9 &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q ** The number -3 doesn't appear in the second column of the original table so it won't appear in the first column of the inverted table. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: ok confidence rating #$&*: 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: Note that sqrt(-3) is not a real number, since the square of a real number must be positive. ** 13. Translate each of the following exponential equations into equations involving logarithms, and solve where possible: 2 ^ x = 18 2 ^ (4x) = 12 5 * 2^x = 52 2^(3x - 4) = 9. b^x = c is translated into logarithmic notation as log{base b}(c) = x. So: 2^x = 18 translates directly to log{bas3 2}(18) = x. For 5 * 2^x = 52, divide both sides by 5 to get 2^x = 10.4. Now take logs: 2x = log{base 2}(10.4) so x = 1/2 log{base 2}(10.4). Evaluate on your calculator. 2^(3x-4) = 9 translates to log{base 2}(9) = 3x - 4. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique rating #$&*:0 ********************************************* Question: `q 14. Solve 2^(3x-5) + 4 = 0 ** YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: 2^(3x-5)+4=0 2^(3x-5)=-4 Sqrt(2^3x-5)=sqrt-4 Cant be done cant take the sqrt of a neg. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: 2^(3x-5) + 4 = 0 rearranges to 2^(3x-5) =-4, which we translate as 3x-5 = log {base 2}(-4) = log(-4) / log (2). However log(-4) doesn't exist. When you invert the 10^x table you don't end up with any negative x values. So there is no solution to this problem. Be sure that you thoroughly understand the following rules: 10^x = b translates to x = log(b), where log is understood to be the base-10 log. e^x = b translates to x = ln(b), where ln is the natural log. a^x = b translates to x = log{base a} (b), where log{base a} would be written in your text as log with subscript a. log{base a}(b) = log(b) / log(a), where log is the base-10 log. It also works with the natural log: log{base a}(b) = ln(b) / ln(a). ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): Ok needed to use the nat log not the sqrt function ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q Solve 2^(1/x) - 3 = 0 YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: 2^(1/x)=3 So we take the nat log of both Ln2/x=ln3 X=.630931 confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** Rearrange to 2^(1/x) = 3. Then take log of both sides: log(2^(1/x) ) = log(3). Use properties of logs: (1/x) log(2) = log(3). Solve for x: x = log(2) / log(3). ** Solve 2^x * 2^(1/x) = 15 ** 2^x * 2^(1/x) = 15. By the laws of exponents we get 2^(x +1/x) = 15 so that x + 1/x = log {base2}(15) or x + 1/x =log(15) / log(2). Multiply both sides by x to get x^2 + 1 = [log(15) / log(2) ] * x. This is a quadratic equation. Rearrange to get x^2 - [ log(15) / log(2) ] * x + 1 = 0 or x^2 - 3.91 * x + 1 = 0. Solve using the quadratic fomula. ** Solve (2^x)^4 = 5 ** log( (2^x)^4 ) = log(5). Using laws of logarithms 4 log(2^x) = log(5) 4 * x log(2) = log(5) 4x = log(5) / log(2) etc.** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q problem 1.3.20 5th; 1.3.22 4th. C=f(A) = cost for A sq ft. What do f(10k) and f^-1(20k) represent? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: They represent the amount that can be spent on 10000 and 20000 sq ft. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** f(10,000) is the cost of 10,000 sq ft. f^-1(20,000) is the number of square feet you can cover for $20,000. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q problem 1.3.38 4th edition. Write an equation for the function if we vertically stretch y = x^2 by factor 2 then vertically shift the graph 1 unit upward. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: Y=2x^2+1 confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** Vertically stretching y = x^2 we get y = 2 x^2. The vertical shift adds 1 to all y values, giving us the function y = 2 x^2 + 1. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q Give the equation of the function. Describe your sketch in detail. Explain what effect, if any, it would have on the graph if we were to reverse the order of the transformations. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The graph now looks like a right half of an upside down horseshoe that has an origin about 1 above the origin. confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** The function would be y = f(x) = 2 x^2 + 1. The factor 2 stretches the y = x^2 parabola verticall and +1 shifts every point of the stretched parabola 1 unit higher. The result is a parabola which is concave up with vertex at point (0,1). The parabola has been stretched by a factor of 2 as compared to a x^2 parabola. If the transformations are reversed the the graph is shifted downward 1 unit then stretched vertically by factor 2. The vertex, for example, shifts to (0, -1) then when stretched shifts to (0, -2). The points (-1, 1) and (1, 1) shift to (-l, 1) and (1, 0) and the stretch leaves them there. The shift would transform y = x^2 to y = x^2 - 1. The subsequent stretch would then transform this function to y = 2 ( x^2 - 1) = 2 x^2 - 2. The reversed pair of transformations results in a parabola with its vertex at (0, -2), as opposed to (0, -1) for the original pair of transformations. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q problem 1.3.45 5th; 1.3.43 4th (was 1.8.30) estimate f(g(1))what is your estimate of f(g(1))?Explain how you look at the graphs of f and g to get this result YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: You fing the x and then you use it to find the y value. confidence rating #$&*: 2.5 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** You have to first find g(1), then apply f to that value. To find g(1), you note that this is g(x) for x = 1. So you look on the x-axis where x = 1. Then you move up or down to find the point on the graph where x = 1 and determine the corresponding y value. On this graph, the x = 1 point lies at about y = 2. Then you look at the graph of f(x). You are trying to find f(g(1)), which we now see is f(2). So we look at the x = 2 point on the x-axis and then look up or down until we find the graph, which for x = 2 lies just a little bit above the x axis. Looking over to the y-axis we see that at this point y is about .1. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q problem Graph the function f(x) = x^2 + 3^x for x > 0. Decide if this function has an inverse. If so, find the approximate value of the inverse function at x = 20. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: Yes this function does have an inverse. confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** The inverse of a function at a certain value is the x that would give you that value when plugged into the function. At x = 20 for g(x) = x^2 + e^x is the x value for which x^3 + 3^x = 20. The double use of x is confusing and way the problem is stated in the text isn't as clear as we might wish, but what you have to do is estimate the required value of x. It would be helpful to sketch the graph of the inverse function by reflecting the graph of the original function through the line y = x, or alternatively and equivalently by making an extensive table for the function, then reversing the columns. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique rating #$&*:3 ********************************************* Question: `q If H = f(t) describes the temperature H of an object at clock time t, then what does it mean to say that H(30)=10? What information would you get from the vertical and horizontal intercepts of the graph of the function? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: Yoe would get that the h =10 which is the temp and clock time is 30 confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: H is the temperature, t is the clock time. H(30) is the temperature at clock time t = 30, so H(30) = 10 tells us that a clock time t = 30 the temperature was 10 degrees. The vertical coordinate is the temperature, and the vertical intercept of the graph occurs when t = 0 so the vertical intercept gives us the temperature at clock time 0. The vertical coordinate is the clock time, and the horizontal intercept occurs when H = 0, so the horizontal intercept gives us the clock time when temperature is 0. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique rating #$&*:3