Misc

course Mth 271

I did not know the majority of these answers. I am going back and looking over the correct answers. Should I resend the document with the all the correct answers once I understand them?

003. Misc: Surface Area, Pythagorean Theorem, Density

*********************************************

Question: `q001. There are 10 questions and 5 summary questions in this assignment.

What is surface area of a rectangular solid whose dimensions are 3 meters by 4 meters by 6 meters?

*********************************************

Your solution:

Surface area of rectangle = 2(l * w + l * h + w * h)

SA= 2(6m * 3m + 6m * 4m + 3m * 4m)= 2(18m^2+24m^2+12m^2)=2(54m^2)=108m^2

.............................................

Given Solution:

`aA rectangular solid has six faces (top, bottom, front, back, left side, right side if you're facing it). The pairs top and bottom, right and left sides, and front-back have identical areas. This solid therefore has two faces with each of the following dimensions: 3 m by 4 m, 3 m by 6 m and 4 m by 6 m, areas 12 m^2, 18 m^2 and 24 m^2. Total area is 2 * 12 m^2 + 2 * 18 m^2 + 2 * 24 m^2 = 108 m^2.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q002. What is the surface area of the curved sides of a cylinder whose radius is five meters and whose altitude is 12 meters? If the cylinder is closed what is its total surface area?

The circumference of this cylinder is 2 pi r = 2 pi * 5 m = 10 pi m. If the cylinder was cut by a straight line running up its curved face then unrolled it would form a rectangle whose length and width would be the altitude and the circumference. The area of the curved side is therefore

A = circumference * altitude = 10 pi m * 12 m = 120 pi m^2.

If the cylinder is closed then it has a top and a bottom, each a circle of radius 5 m with resulting area A = pi r^2 = pi * (5 m)^2 = 25 pi m^2. The total area would then be

total area = area of sides + 2 * area of base = 120 pi m^2 + 2 * 25 pi m^2 = 170 pi m^2.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q003. What is surface area of a sphere of diameter three cm?

*********************************************

Your solution:

.............................................

Given Solution:

`aThe surface area of a sphere of radius r is A = 4 pi r^2. This sphere has radius 3 cm / 2, and therefore has surface area

A = 4 pi r^2 = 4 pi * (3/2 cm)^2 = 9 pi cm^2.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

You should self-critique here. For example you should make note of the formula for the surface area of the sphere, which I expect you didn't know before.

I expect from your previous answers that you know quite well how to apply the formula once you have it, and wouldn't need to address that part of the solution.

*********************************************

Question: `q004. What is hypotenuse of a right triangle whose legs are 5 meters and 9 meters?

*********************************************

Your solution:

A^2 + b^2 = c^2

5^2 + 9^2 = 25+ 81 = 106m^2

`sqrt(106m^2)= 10.3m

.............................................

Given Solution:

`aThe Pythagorean Theorem says that the hypotenuse c of a right triangle with legs a and b satisfies the equation c^2 = a^2 + b^2. So, since all lengths are positive, we know that

c = sqrt(a^2 + b^2) = sqrt( (5 m)^2 + (9 m)^2 ) = sqrt( 25 m^2 + 81 m^2) = sqrt( 106 m^2 ) = 10.3 m, approx..

Note that this is not what we would get if we made the common error of assuming that sqrt(a^2 + b^2) = a + b; this would tell us that the hypotenuse is 14 m, which is emphatically not so. There is no justification whatsoever for applying a distributive law (like x * ( y + z) = x * y + x * z ) to the square root operator.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q005. If the hypotenuse of a right triangle has length 6 meters and one of its legs has length 4 meters what is the length of the other leg?

*********************************************

Your solution:

A^2 + b^2 = c^2

4^2 + b^2= 6^2

16 + b^2 = 36

b^2 = 20

`sqrt(20)= 4.47m= b

.............................................

Given Solution:

`aIf c is the hypotenuse and a and b the legs, we know by the Pythagorean Theorem that c^2 = a^2 + b^2, so that a^2 = c^2 - b^2. Knowing the hypotenuse c = 6 m and the side b = 4 m we therefore find the unknown leg:

a = sqrt( c^2 - b^2) = sqrt( (6 m)^2 - (4 m)^2 ) = sqrt(36 m^2 - 16 m^2) = sqrt(20 m^2) = sqrt(20) * sqrt(m^2) = 2 sqrt(5) m,

or approximately 4.4 m.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q006. If a rectangular solid made of a uniform, homogeneous material has dimensions 4 cm by 7 cm by 12 cm and if its mass is 700 grams then what is its density in grams per cubic cm?

*********************************************

Your solution:

.............................................

Given Solution:

`aThe volume of this solid is 4 cm * 7 cm * 12 cm = 336 cm^3.

Its density in grams per cm^3 is the number of grams in each cm^3. We find this quantity by dividing the number of grams by the number of cm^3. We find that

density = 700 grams / (336 cm^3) = 2.06 grams / cm^3.

Note that the solid was said to be uniform and homogeneous, meaning that it's all made of the same material, which is uniformly distributed. So each cm^3 does indeed have a mass of 2.06 grams. Had we not known that the material was uniform and homogeneous we could have said that the average density is 2.06 grams / cm^3, but not that the density is 2.06 grams / cm^3 (the object could be made of two separate substances, one with density less than 2.06 grams / cm^3 and the other with density greater than 2.06 g / cm^3, in appropriate proportions; neither substance would have density 2.06 g / cm^3, but the average density could be 2.06 g / cm^3).

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

NOTE TO STUDENT: (in this note the instructor attempts to

clarify the idea of 'demonstrating what you do and do not understand about the

statement of the problem' and 'giving a phrase-by-phrase analysis of the given

solution')

 

You did not respond to the question and did not

self-critique.

 

You would be expected to address the question, stating what

you do and do not understand. 

Having noted these things, you will be much better

prepared to understand the information in the given solution.

Then you need to address the information in the given

solution.  A 'phrase-by-phrase' analysis is generally very beneficial:

 

*********************************************

Question: `q007. What is the mass of a sphere of radius 4 meters if its average density is 3,000 kg/cubic meter?

*********************************************

Your solution:

.............................................

Given Solution:

`aA average density of 3000 kg / cubic meter implies that, at least on the average, every cubic meter has a mass of 3000 kg. So to find the mass of the sphere we multiply the number of cubic meters by 3000 kg.

The volume of a sphere of radius 4 meters is 4/3 pi r^3 = 4/3 * pi (4m)^3 = 256/3 * pi m^3. So the mass of this sphere is

mass = density * volume = 256 / 3 * pi m^3 * 3000 kg / m^3 = 256,000 * pi kg.

This result can be approximated to an appropriate number of significant figures.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q008. If we build a an object out of two pieces of material, one having a volume of 6 cm^3 at a density of 4 grams per cm^3 and another with a volume of 10 cm^3 at a density of 2 grams per cm^3 then what is the average density of this object?

*********************************************

Your solution:

.............................................

Given Solution:

`aThe first piece has a mass of 4 grams / cm^3 * 6 cm^3 = 24 grams. The second has a mass of 2 grams / cm^3 * 10 cm^3 = 20 grams. So the total mass is 24 grams + 20 grams = 44 grams.

The average density of this object is

average density = total mass / total volume = (24 grams + 20 grams) / (6 cm^3 + 10 cm^3) = 44 grams / (16 cm^3) = 2.75 grams / cm^3.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q009. In a large box of dimension 2 meters by 3 meters by 5 meters we place 27 cubic meters of sand whose density is 2100 kg/cubic meter, surrounding a total of three cubic meters of cannon balls whose density is 8,000 kg per cubic meter. What is the average density of the material in the box?

*********************************************

Your solution:

.............................................

Given Solution:

`aWe find the average density from the total mass and the total volume. The mass of the sand is 27 m^3 * 2100 kg / m^3 = 56,700 kg. The mass of the cannonballs is 3 m^3 * 8,000 kg / m^3 = 24,000 kg.

The average density is therefore

average density = total mass / total volume = (56,700 kg + 24,000 kg) / (27 m^3 + 3 m^3) = 80,700 kg / (30 m^3) = 2,700 kg / m^3, approx..

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q010. How many cubic meters of oil are there in an oil slick which covers 1,700,000 square meters (between 1/2 and 1 square mile) to an average depth of .015 meters? If the density of the oil is 860 kg/cubic meter the what is the mass of the oil slick?

*********************************************

Your solution:

.............................................

Given Solution:

`aThe volume of the slick is V = A * h, where A is the area of the slick and h the thickness. This is the same principle used to find the volume of a cylinder or a rectangular solid. We see that the volume is

V = A * h = 1,700,000 m^2 * .015 m = 25,500 m^3.

The mass of the slick is therefore

mass = density * volume = 860 kg / m^3 * 24,400 m^3 = 2,193,000 kg.

This result should be rounded according to the number of significant figures in the given information.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q011. Summary Question 1: How do we find the surface area of a cylinder?

*********************************************

Your solution:

.............................................

Given Solution:

`aThe curved surface of the cylinder can be 'unrolled' to form a rectangle whose dimensions are equal to the circumference and the altitude of the cylinder, so the curved surface has volume

Acurved = circumference * altitude = 2 pi r * h, where r is the radius and h the altitude.

The top and bottom of the cylinder are both circles of radius r, each with resulting area pi r^2.

{]The total surface area is therefore

Acylinder = 2 pi r h + 2 pi r^2.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q012. Summary Question 2: What is the formula for the surface area of a sphere?

*********************************************

Your solution:

.............................................

Given Solution:

`aThe surface area of a sphere is

A = 4 pi r^2,

where r is the radius of the sphere.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q013. Summary Question 3: What is the meaning of the term 'density'.

*********************************************

Your solution:

.............................................

Given Solution:

`aThe average density of an object is its mass per unit of volume, calculated by dividing its total mass by its total volume. If the object is uniform and homogeneous then its density is constant and we can speak of its 'density' as opposed to its 'average density'

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q014. Summary Question 4: If we know average density and mass, how can we find volume?

*********************************************

Your solution:

.............................................

Given Solution:

`aSince mass = ave density * volume, it follows by simple algebra that volume = mass / ave density.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q015. Explain how you have organized your knowledge of the principles illustrated by the exercises in this assignment.

This ends the third assignment.

004. Units of volume measure

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q001. There are 10 questions and 5 summary questions in this assignment.

How many cubic centimeters of fluid would require to fill a cubic container 10 cm on a side?

*********************************************

Your solution:

Cubic centimeters are cm ^3

10cm ^3 = 1000cm^3

.............................................

Given Solution:

`aThe volume of the container is 10 cm * 10 cm * 10 cm = 1000 cm^3. So it would take 1000 cubic centimeters of fluid to fill the container.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q002. How many cubes each 10 cm on a side would it take to build a solid cube one meter on a side?

*********************************************

Your solution:

It would take 10 cubes to make one meter.

.............................................

Given Solution:

`aIt takes ten 10 cm cubes laid side by side to make a row 1 meter long or a tower 1 meter high. It should therefore be clear that the large cube could be built using 10 layers, each consisting of 10 rows of 10 small cubes. This would require 10 * 10 * 10 = 1000 of the smaller cubes.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q003. How many square tiles each one meter on each side would it take to cover a square one km on the side?

*********************************************

Your solution:

.............................................

Given Solution:

`aIt takes 1000 meters to make a kilometer (km). To cover a square 1 km on a side would take 1000 rows each with 1000 such tiles to cover 1 square km. It therefore would take 1000 * 1000 = 1,000,000 squares each 1 m on a side to cover a square one km on a side.

We can also calculate this formally. Since 1 km = 1000 meters, a square km is (1 km)^2 = (1000 m)^2 = 1,000,000 m^2.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q004. How many cubic centimeters are there in a liter?

*********************************************

Your solution:

.............................................

Given Solution:

`aA liter is the volume of a cube 10 cm on a side. Such a cube has volume 10 cm * 10 cm * 10 cm = 1000 cm^3. There are thus 1000 cubic centimeters in a liter.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q005. How many liters are there in a cubic meter?

*********************************************

Your solution:

.............................................

Given Solution:

`aA liter is the volume of a cube 10 cm on a side. It would take 10 layers each of 10 rows each of 10 such cubes to fill a cube 1 meter on a side. There are thus 10 * 10 * 10 = 1000 liters in a cubic meter.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q006. How many cm^3 are there in a cubic meter?

*********************************************

Your solution:

.............................................

Given Solution:

`aThere are 1000 cm^3 in a liter and 1000 liters in a m^3, so there are 1000 * 1000 = 1,000,000 cm^3 in a m^3.

It's important to understand the 'chain' of units in the previous problem, from cm^3 to liters to m^3. However another way to get the desired result is also important:

There are 100 cm in a meter, so 1 m^3 = (1 m)^3 = (100 cm)^3 = 1,000,000 cm^3.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q007. If a liter of water has a mass of 1 kg the what is the mass of a cubic meter of water?

*********************************************

Your solution:

.............................................

Given Solution:

`aSince there are 1000 liters in a cubic meter, the mass of a cubic meter of water will be 1000 kg. This is a little over a ton.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q008. What is the mass of a cubic km of water?

*********************************************

Your solution:

.............................................

Given Solution:

`aA cubic meter of water has a mass of 1000 kg. A cubic km is (1000 m)^3 = 1,000,000,000 m^3, so a cubic km will have a mass of 1,000,000,000 m^3 * 1000 kg / m^3 = 1,000,000,000,000 kg.

In scientific notation we would say that 1 m^3 has a mass of 10^3 kg, a cubic km is (10^3 m)^3 = 10^9 m^3, so a cubic km has mass (10^9 m^3) * 1000 kg / m^3 = 10^12 kg.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q009. If each of 5 billion people drink two liters of water per day then how long would it take these people to drink a cubic km of water?

*********************************************

Your solution:

.............................................

Given Solution:

`a5 billion people drinking 2 liters per day would consume 10 billion, or 10,000,000,000, or 10^10 liters per day.

A cubic km is (10^3 m)^3 = 10^9 m^3 and each m^3 is 1000 liters, so a cubic km is 10^9 m^3 * 10^3 liters / m^3 = 10^12 liters, or 1,000,000,000,000 liters.

At 10^10 liters per day the time required to consume a cubic km would be

time to consume 1 km^3 = 10^12 liters / (10^10 liters / day) = 10^2 days, or 100 days.

This calculation could also be written out:

1,000,000,000,000 liters / (10,000,000,000 liters / day) = 100 days.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q010. The radius of the Earth is approximately 6400 kilometers. What is the surface area of the Earth? If the surface of the Earth was covered to a depth of 2 km with water that what would be the approximate volume of all this water?

*********************************************

Your solution:

.............................................

Given Solution:

`aThe surface area would be

A = 4 pi r^2 = 4 pi ( 6400 km)^2 = 510,000,000 km^2.

A flat area of 510,000,000 km^2 covered to a depth of 2 km would indicate a volume of

V = A * h = 510,000,000 km^2 * 2 km = 1,020,000,000 km^3.

However the Earth's surface is curved, not flat. The outside of the 2 km covering of water would have a radius 2 km greater than that of the Earth, and therefore a greater surface area. However a difference of 2 km in 6400 km will change the area by only a fraction of one percent, so the rounded result 1,020,000,000,000 km^3 would still be accurate.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q011. Summary Question 1: How can we visualize the number of cubic centimeters in a liter?

*********************************************

Your solution:

.............................................

Given Solution:

`aSince a liter is a cube 10 cm on a side, we visualize 10 layers each of 10 rows each of 10 one-centimeter cubes, for a total of 1000 1-cm cubes. There are 1000 cubic cm in a liter.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q012. Summary Question 2: How can we visualize the number of liters in a cubic meter?

*********************************************

Your solution:

.............................................

Given Solution:

`aSince a liter is a cube 10 cm on a side, we need 10 such cubes to span 1 meter. So we visualize 10 layers each of 10 rows each of 10 ten-centimeter cubes, for a total of 1000 10-cm cubes. Again each 10-cm cube is a liter, so there are 1000 liters in a cubic meter.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q013. Summary Question 3: How can we calculate the number of cubic centimeters in a cubic meter?

*********************************************

Your solution:

.............................................

Given Solution:

`aOne way is to know that there are 1000 liters in a cubic meters, and 1000 cubic centimeters in a cubic meter, giving us 1000 * 1000 = 1,000,000 cubic centimeters in a cubic meter. Another is to know that it takes 100 cm to make a meter, so that a cubic meter is (100 cm)^3 = 1,000,000 cm^3.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q014. Summary Question 4: There are 1000 meters in a kilometer. So why aren't there 1000 cubic meters in a cubic kilometer? Or are there?

*********************************************

Your solution:

.............................................

Given Solution:

`aA cubic kilometer is a cube 1000 meters on a side, which would require 1000 layers each of 1000 rows each of 1000 one-meter cubes to fill. So there are 1000 * 1000 * 1000 = 1,000,000,000 cubic meters in a cubic kilometer.

Alternatively, (1 km)^3 = (10^3 m)^3 = 10^9 m^3, not 1000 m^3.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

*********************************************

Question: `q015. Explain how you have organized your knowledge of the principles illustrated by the exercises in this assignment.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Self-critique Rating:

"

My best recommendation is do a phrase-by-phrase response to the given solutions. Remember that your self-critique can include specific questions about the given solutions. Try to communicate what you do and do not understand about each phrase and each concept in the given solution.

For the present document you don't need to do this with every phrase of every problem. See my notes about the process, inserted into your submitted document. Then spend some time practicing the process on selected problems of your own choice. It's possible to spend days on just this one exercise, but that's neither expected or requested. I recommend spending 30-60 minutes on this, then submitting the revised document for my further comments.