Phy 121
Your 'timer program' report has been received. Scroll down through the document to see any comments I might have inserted, and my final comment at the end.
** #$&* Your General Comment **
** #$&* Describe what you see on your first 10 clicks **
** #$&*Your TIMER data from 20 fast clicks **
It is easy to operate the Timer program. All you have to do is click on the button labeled Click to Time Event.
Click that button about 10 times and describe what you see.
Ten numbers appear labeled 1 through ten. This list is a list of numbers starting with 41 and ending with 40, all have decimals that follow the number to 5 decimal places. To the right of this list is a list that followes the original list but contains fractions of numbers in decomal form.
#$&*
Now click on Initialize Counter, which will clear all the data from the timer window. Click the mouse as fast as you can until the TIMER window fills up. Be sure you get at least 20 time intervals.
If you miss a click, try again. Keep trying until you get at least 20 intervals without a missed or delayed click.
Copy your data starting in the next line:
1 206.5321 206.5321
2 206.75 .2178955
3 206.9851 .2351074
4 207.203 .2178955
5 207.422 .2189941
6 207.641 .2189941
7 207.8601 .2191162
8 208.094 .2338867
9 208.313 .2189941
10 208.516 .2030029
11 208.75 .2340088
12 208.9851 .2351074
13 209.203 .2178955
14 209.4071 .2041016
15 209.625 .2178955
16 209.844 .2189941
17 210.063 .2189941
18 210.266 .2030029
19 210.4851 .2191162
20 210.688 .2028809
#$&*
You got at least 20 time intervals. Based on your data what was the average of the first 20 time intervals? Note that you could get this average by averaging the first 20 intervals. My first few intervals were .15625, .15625, .1875, .171875, etc; I could just add up the first 20 intervals and divide by 20 to get the average. However there is an easier and quicker way to get the result, so use the easier way if you can.
Give your result, number only, in the first line, and starting in the second line explain how you got it.
.207795
found the average by taking the ending time 210.688 and subtracting the starting time 206.5321, and then dividing the answer by 20 time intervals
#$&*
When I did this activity the first few lines of my data were as follows:
event number clock time time interval
1 11.67188 11.67188
2 11.875 0.203125
3 12.0625 0.1875
4 12.20313 0.140625
5 12.375 0.171875
6 12.54688 0.171875
7 12.73438 0.1875
8 12.92188 0.1875
9 13.10938 0.1875
10 13.28125 0.171875
11 13.4375 0.15625
It looks like the same intervals keep popping up. For example .1875 seconds occurs 5 times out of the first 10 intervals, .171875 seconds occurs three times, and .203125 seconds, .140625 seconds and .15625 seconds each occur once.
A frequency distribution for my time intervals would be as follows:
time interval frequency
,140625 1
.15625 1
.171875 3
.1875 5
.203125 1
What different time intervals did you observe in your first 20 intervals, and how many times did each occur? List below the different time intervals you observed and the number of times each occurred. List from the shortest to the longest interval, and use a comma between the time interval and its frequency. For example my data above would be listed at
.140625, 1
.1565, 1
.171875, 3
.1875, 5
.203125, 1
Your list should be in exactly this format, with no other symbols or characters.
.235107, 1
.234008, 1
.233886,1
.219116,2
.218994,5
.217895,4
.204101,1
.2023002,2
.20288,1
#$&*
You may make any comments or ask any question about the process so far in the box below
This is intersting, I'm just not sure if this could really be that accurate, with a wireless mouse, and a right index finger....
#$&*
On the 10 intervals I've shown you, do you really think I managed to get a time of .1875 seconds, accurate to 4 significant figures, on half of the intervals? If you do, I'm grateful for your confidence but I'm just not that good. No human being has that much neurological and muscular control.
So why do you think the TIMER program reported that time so frequently? Why weren't there times like .1830 seconds, or .1769 seconds? Does this mean that the TIMER program is flawed? Does that mean it's useless?
I don't think the program is flawed, or useless... it has its applications. Perhaps, it measures too well and measured not only the clicks, but also the letting up of the mouse button, if thats possible?
The computer runs on its internal timer, which 'fires' only at certain intervals.
#$&*
Here are a few more lines of data, with an added column showing the difference between each time interval and the next.
clock time time interval difference from one time interval to next
9 13.10938 0.1875 -0.01563
10 13.28125 0.171875 -0.01563
11 13.4375 0.15625 0.03125
12 13.625 0.1875 -0.01563
13 13.79688 0.171875 0.015625
14 13.98438 0.1875 0.015625
15 14.1875 0.203125 -0.03125
16 14.35938 0.171875 -0.01563
17 14.51563 0.15625 0.03125
Take a good look at that last column and tell us what you see in those numbers, and what this tells you about the TIMER program
Not quite sure what the timer program is doing here... there are some negative time intervals, and as far as I know, we have not mastered the traveling back in time thing (yet)
I'm not really sure what this means....
Those are the differences between the intervals. Some intervals are shorter, some are longer than the preceding interval.
#$&*
Now initialize the TIMER once more, and take a series of 10 relaxed breaths. Every time you start to inhale, hit the TIMER button.
My results for the first 7 complete breaths are as follows:
series of relaxed breaths
event number clock time time interval difference between time interval and next
1 1569.734 1569.734
2 1582.75 13.01563 0.32812
3 1596.094 13.34375 3.90625
4 1613.344 17.25 2.70313
5 1633.297 19.95313 1.35937
6 1654.609 21.3125 4.23438
7 1680.156 25.54688 2.15625
8 1707.859 27.70313
I didn't go on because the time between my breaths kept increasing, and I was afraid if I relaxed any more I might stop breathing altogether. It's going to take either more statistical analysis to determine whether that's a real danger, or a little common sense.
Report your results by just entering your time intervals, one to each line, in the box below. If I was entering my results I would enter
13.01563
13.34375
17.25
19.95313
21.3125
etc.
Enter your results in the same format:
5.327881
5.766113
5
4.358887
3.953125
4.218994
3.733887
4.812988
4.203125
#$&*
If you have any comments please insert them here
SO evidently, my brain seems to think my version of relaxed breathing doesn't deliver enough oxygen, because I went from over 5 seconds, to below 4 between breaths.
listen to your brain
#$&*
Most likely you did not observe the same exact time interval twice, and if you did it did not happen nearly as often as when you did the fact clicks.
Why do you think this is exactly what we would expect?
Breathing, not being under conscious control unless we want it to, is less repdictable and with more variation than a series of clicks by fewer and smaller musles in the finger.
#$&*
Which of the following statements do you think is the most accurate?
a. The TIMER program is capable of determining the time between two events accurately to within about .1 second.
b. The TIMER program is capable of determining the time between two events accurately to within about .01 second.
c. The TIMER program is capable of determining the time between two events accurately to within about .001 second.
d. The TIMER program is capable of determining the time between two events accurately to within about .0001 second.
Enter your answer and your reasoning below:
a.... because the timer program could not possible be any more accurate, purely for the reason that it also takes time to take in the mouse click, send it to the computer and then have it put on the screen....
#$&*
Note that the TIMER.exe program can save your data in a format that can be read by a spreadsheet (the TIMER applet cannot do so). This will be very handy in the future, so take a minute and do the following:
1. Click on the button at the lower right of the TIMER form, entitled Click to File Data.
2. A box will pop up allowing you to include an identifying message. You should generally choose to include such a message; for the data presently on your timer that might be 'series of regular breaths time at beginning of inhalation' or something similar. Type in whatever you think would serve as a good identifier for this data and OK that box.
3. A typical Save As window will appear. Decide where to save your data and what to call it, and proceed to save it. The program will save the file as a comma-delimited text file.
4. Open your spreadsheet program (typically Excel) and choose File > Open. Browse to the folder in which you just saved your data. Below the File Name line will be a File Type line; set this either to Text Files or All Files so your file will appear. Open it.
5. A series of windows will typically appear. In the first window make sure the file type chosen is Delimited, the proceed to the next window.
6. In the second window you will see a series of checkboxes; check the one entitled Comma, in order to select the comma-delimited file, then just click on Finish.
Your data should appear in your spreadsheet, and can be manipulated as in any spreadsheet.
Copy a few lines of the data from your spreadsheet below:
Timer program breaths
** #$&*Your average time interval for 20 time intervals **
event number clock time time interval
1 1262.266 1262.266
2 1267.594 5.327881
3 1273.36 5.766113
4 1278.36 5
5 1282.719 4.358887
6 1286.672 3.953125
7 1290.891 4.218994
8 1294.625 3.733887
9 1299.438 4.812988
10 1303.641 4.203125
&#This looks good. See my notes. Let me know if you have any questions. &#