Phy 231
Your 'cq_1_00.1' report has been received. Scroll down through the document to see any comments I might have inserted, and my final comment at the end.
** **
Copy the problem below into a text editor or word processor.
. This form accepts only text so a text editor such as Notepad is fine.
. Include the text of the entire problem, starting with the words 'The Problem:'.
. You might prefer for your own reasons to use a word processor (for example the formatting features might help you organize your answer and explanations), but note that formatting will be lost when you submit your work through the form.
. If you use a word processor avoid using special characters or symbols, which would require more of your time to create and will not be represented correctly by the form.
. As you will see within the first few assignments, there is an easily-learned keyboard-based shorthand that doesn't look quite as pretty as word-processor symbols, but which gets the job done much more efficiently.
You should enter your answers into this copy using the text editor or word processor. Enter your response to each question following the answer/question/discussion: prompt.
You will then copy-and-paste the document, which will include the questions and your answers, into the box below, and submit.
The videos
There are four short videos, all of the same system. The smaller files are around 500 kB and will download faster than the larger files, which are about 4 times that size (about 2 mB or 2000 kB), but the larger files are a bit better in quality. If you have a fast connection any of these files should download fairly quickly. Video 1 and Video 2 probably contain the best information; Video 4 is the shortest.
The quality of these videos is not that great, and that is deliberate. These are medium-definition videos, taken with a camera that doesn't have a particularly high shutter speed. It's not important here to even know what a shutter speed is, but the effect of the slow shutter speed is to cause images of moving objects to be blurry.
. All data in any science is in effect 'blurry'--there are limits to the precision of our measurements--and we start off the course with images that have obvious imperfections. We will later use images made with a high-definition camera with a fast shutter, where imperfections, though still present, are difficult to detect.
Video 1 (smaller file) Video 1 (larger file)
Video 2 (smaller file) Video 2 (larger file)
Video 3 (smaller file) Video 3 (larger file)
Video 4 (smaller file) Video 4 (larger file)
View these videos of a white roll of tape rolling down an incline next to a dark swinging pendulum, using Windows Media Player or a commercial media player. By alternately clicking the 'play' and 'pause' buttons you will be able to observe a series of positions and clock times.
The measuring tape in the video may be difficult to read, but it is a standard measuring tape marked in feet and inches. At the 1-foot mark, a little to the left of the center of the screen, there is a black mark on the tape. If you want to read positions but can't read the inches you can count them to the right and left of this mark. You can estimate fractions of an inch. You don't need to write anything down; just take a good look.
Begin by forming an opinion of the following questions; for the moment you may ignore the computer screen in the video. You don't have to write anything down at this point; just play with the videos for a couple of minutes and see what you think:
. Is the tape speeding up or slowing down?
. The tape is speeding up.
. Is the pendulum speeding up or slowing down?
. The pendulum is also speeding up.
. Which speeds up faster, the tape or the pendulum?
. At first the pendulum speeds up faster but towards the end of each run the tape speeds up much faster.
. What is going to limit your ability to precisely measure the positions of these objects?
I cannot see the exact positions of the tape or the pendulum on the tape measure. Also since the camera is not running parallel to both the objects it could just be an illusion to see which one is hitting the wall first.
The computer in the video displays the running 'clock time', which is accurate to within something like .01 second. Think about how the information on this screen can help answer the above questions.
You don't have to think about the following right now, so I'm going to make it easy to ignore by putting it into small type. There is a parallax issue here. You don't even have to know what this means. But if you do, and if you want the information, here it is:
. The measuring tape is pretty much parallel to the paths of the pendulum and the tape roll, about 5 inches further from the camera than the path of the pendulum, and the path of the ball is about halfway between the two. The camera is about 5 feet away from the system.
The problem:
You don't have to actually do so, but it should be clear that if you wished to do so, you could take several observations of positions and clock times. The main point here is to think about how you would use that information if you did go to the trouble of collecting it. However, most students do not answer these questions in terms of position and clock time information. Some students do not pause the video as instructed. To be sure you are thinking in terms of positions and clock times, please take a minute to do the following, which should not take you more than a couple of minutes:
. Pick one of the videos, and write down the position and clock time of one of the objects, as best you can determine them, in each of three different frames. The three frames should all depict the same 'roll' down the ramp, i.e. the same video clip, at three different clock times. They should not include information from two or more different video clips.
Tape 20.453 at 4 inches 20.781 at 14 inches 21.000 at 21 inches
Pendulum 20.453 at 4 inches 20.781 at 12 inches 21.000 at 18 inches
. For each of the three readings, simply write down the clock time as it appears on the computer screen, and the position of the object along the meter stick. You can choose either object (i.e., either the pendulum or the roll of tape), but use the same object for all three measurements. Do not go to a lot of trouble to estimate the position with great accuracy. Just make the best estimates you can in a couple of minutes.
Which object did you choose and what were the three positions and the three clock times?
Tape 20.453 at 4 inches 20.781 at 14 inches 21.000 at 21 inches
Pendulum 20.453 at 4 inches 20.781 at 12 inches 21.000 at 18 inches
->->->->->->->->->->->-> answer/question/discussion:
In the following you don't have to actually do calculations with your actual data. Simply explain how you would use data of this nature if you had a series of several position vs. clock time observations:
. If you did use observations of positions and clock times from this video, how accurately do you think you could determine the positions, and how accurately do you think you would know the clock times? Give a reasonable numerical answer to this question (e.g., positions within 1 meter, within 2 centimeters, within 3 inches, etc; clock times within 3 seconds, or within .002 seconds, or within .4 seconds, etc.). You should include an explanations of the basis for your estimate: Why did you make the estimate you did?
->->->->->->->->->->->-> answer/question/discussion: I think I could accurately determine the position by a half of an inche and the time by .001 seconds. Since the clock shows up to three decimal positions and since I can see the tape measure but cannot see the hash marks in between the inches.
. How can you use observations of position and clock time to determine whether the tape rolling along an incline is speeding up or slowing down?
->->->->->->->->->->->-> answer/question/discussion: By seeing how much time it is taking to go between two points then by seeing how fast it goes between two different points.
. How can you use observations of position and clock time to determine whether the swinging pendulum is speeding up or slowing down?
->->->->->->->->->->->-> answer/question/discussion: By seeing how much time it is taking to go between two points then by seeing how fast it goes between two different points.
. Challenge (University Physics students should attempt answer Challenge questions; Principles of Physics and General College Physics may do so but it is optional for these students): It is obvious that a pendulum swinging back and forth speeds up at times, and slows down at times. How could you determine, by measuring positions and clock times, at what location a swinging pendulum starts slowing down?
->->->->->->->->->->->-> answer/question/discussion: A pendulum speeds up until it starting to slow down to make another oscillation when it reaches the exact middle of its swing it will start to slow down.
this doesn't explain how you would use measurements of positions and clock times
. Challenge (University Physics students should attempt answer Challenge questions; Principles of Physics and General College Physics may do so but it is optional for these students): How could you use your observations to determine whether the rate at which the tape is speeding up is constant, increasing or decreasing?
->->->->->->->->->->->-> answer/question/discussion: By seeing how fast it takes the tape to pass from one point to another then seeing how fast it goes by two different points.
Check to see that you have followed the instructions:
. The instructions told you to pause the video multiple times. It appears that some students are not following this instruction.
If you haven't used the 'pause' and 'play' buttons on your media player, you should go back and do so.
. The questions are phrased to ask not only what you see when you play the video, but what you see when you pause the video as instructed, and what you think you could determine if you were to actually take data from the video. You aren't asked to actually take the data, but you need to answer how you would use it if you did.
It's OK if you have given more general descriptions, which are certainly relevant. But answers to the questions should include an explanation of how you could use the series of position and clock time observations that are may be observed with this video.
. The questions also ask how much uncertainty there would be in the positions and clock times observable with this specific video. Different people will have different answers, and some reasonable answers might vary from one clip to the next, or from one part of a clip to another. However the answers should include a reasonable quantitative estimate (i.e., numbers to represent the uncertainty; e.g., .004 seconds of uncertainty in clock times, 2 inches in position measurements. Use your own estimates; neither of these example values is necessarily reasonable for this situation). You should also explain the basis for your estimate: why did you make the estimate you did?
You should have estimated the number of seconds or fraction of a second to within which you think the time displayed on the computer screen might be accurate (e.g., is it accurate to within 10 seconds of the actual clock time, or to within 1 second, within .1 second, maybe even within .01 or .001 second). You might not yet know enough about the TIMER to give an accurate answer, but give the best answer you can.
You should also indicate a reasonable estimate of the number of inches or fraction of an inch to within which you could, if asked, determine the position of each object.
** **
An hour.
** **
&#Good work. See my notes and let me know if you have questions. &#