qa asst 3

course MTH 158

ɀхz۲jFassignment #003

003. PC1 questions

qa initial problems

05-25-2009

......!!!!!!!!...................................

17:34:12

`q001 A straight line connects the points (3, 5) and (7, 17), while another straight line continues on from (7, 17) to the point (10, 29). Which line is steeper and on what basis to you claim your result?

......!!!!!!!!...................................

RESPONSE -->

From point (7,17) to (10,29) is steeper.

Slope of (3,5),(7,17) = 2

Slope of (7,17),(10,29)= 4

confidence assessment: 1

.................................................

......!!!!!!!!...................................

17:36:24

The point (3,5) has x coordinate 3 and y coordinate 5. The point (7, 17) has x coordinate 7 and y coordinate 17. To move from (3,5) to (7, 17) we must therefore move 4 units in the x direction and 12 units in the y direction.

Thus between (3,5) and (7,17) the rise is 12 and the run is 4, so the rise/run ratio is 12/4 = 3.

Between (7,10) and (10,29) the rise is also 12 but the run is only 3--same rise for less run, therefore more slope. The rise/run ratio here is 12/3 = 4.

......!!!!!!!!...................................

RESPONSE -->

I didnt figure the full rise of 12 I only used a portion of that to figure the slope.

self critique assessment: 2

.................................................

......!!!!!!!!...................................

17:46:50

`q002. The expression (x-2) * (2x+5) is zero when x = 2 and when x = -2.5. Without using a calculator verify this, and explain why these two values of x, and only these two values of x, can make the expression zero.

......!!!!!!!!...................................

RESPONSE -->

(x-2)*(2x+5)=0 First set the equation to equal 0

Then use the distributive property to get rid of the parentheses

3x+5x - 4x - 10

8x-4x-10

4x-10=0

4x=10

x=10/4

x=2.5

Any other value besides (2.5,-2.5) will not set the equation = 0

confidence assessment: 2

.................................................

......!!!!!!!!...................................

17:49:11

If x = 2 then x-2 = 2 - 2 = 0, which makes the product (x -2) * (2x + 5) zero.

If x = -2.5 then 2x + 5 = 2 (-2.5) + 5 = -5 + 5 = 0.which makes the product (x -2) * (2x + 5) zero.

The only way to product (x-2)(2x+5) can be zero is if either (x -2) or (2x + 5) is zero.

Note that (x-2)(2x+5) can be expanded using the Distributive Law to get

x(2x+5) - 2(2x+5). Then again using the distributive law we get

2x^2 + 5x - 4x - 10 which simplifies to

2x^2 + x - 10.

However this doesn't help us find the x values which make the expression zero. We are better off to look at the factored form.

......!!!!!!!!...................................

RESPONSE -->

self critique assessment: 3

.................................................

......!!!!!!!!...................................

18:30:07

`q003. For what x values will the expression (3x - 6) * (x + 4) * (x^2 - 4) be zero?

......!!!!!!!!...................................

RESPONSE -->

2,-2,-4

3x-6=0

3(2)-6=0

6-6=0

-4+4=0

2^2-4=0

4-4=0

-2^2-4=0

4-4=0

confidence assessment: 1

.................................................

......!!!!!!!!...................................

18:31:28

In order for the expression to be zero we must have 3x-6 = 0 or x+4=0 or x^2-4=0.

3x-6 = 0 is rearranged to 3x = 6 then to x = 6 / 3 = 2. So when x=2, 3x-6 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

x+4 = 0 gives us x = -4. So when x=-4, x+4 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

x^2-4 = 0 is rearranged to x^2 = 4 which has solutions x = + - `sqrt(4) or + - 2. So when x=2 or when x = -2, x^2 - 4 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

We therefore see that (3x - 6) * (x + 4) * (x^2 - 4) = 0 when x = 2, or -4, or -2. These are the only values of x which can yield zero.**

......!!!!!!!!...................................

RESPONSE -->

self critique assessment: 3

.................................................

......!!!!!!!!...................................

18:52:37

`q004. One straight line segment connects the points (3,5) and (7,9) while another connects the points (10,2) and (50,4). From each of the four points a line segment is drawn directly down to the x axis, forming two trapezoids. Which trapezoid has the greater area? Try to justify your answer with something more precise than, for example, 'from a sketch I can see that this one is much bigger so it must have the greater area'.

......!!!!!!!!...................................

RESPONSE -->

area of trapezoid=1/2*h(a+b)

points (3,5),(7,9)=

1/2*4*(9+5)

1/2*4(14)

1/2*56

Area = 28

points (10,2),(50,4)

1/2*40*(2+4)

1/2*40(6)

1/2*240

Area=120 This trapezoid has the greater area

confidence assessment: 1

.................................................

......!!!!!!!!...................................

18:54:25

Your sketch should show that while the first trapezoid averages a little more than double the altitude of the second, the second is clearly much more than twice as wide and hence has the greater area.

To justify this a little more precisely, the first trapezoid, which runs from x = 3 to x = 7, is 4 units wide while the second runs from x = 10 and to x = 50 and hence has a width of 40 units. The altitudes of the first trapezoid are 5 and 9,so the average altitude of the first is 7. The average altitude of the second is the average of the altitudes 2 and 4, or 3. So the first trapezoid is over twice as high, on the average, as the first. However the second is 10 times as wide, so the second trapezoid must have the greater area.

This is all the reasoning we need to answer the question. We could of course multiply average altitude by width for each trapezoid, obtaining area 7 * 4 = 28 for the first and 3 * 40 = 120 for the second. However if all we need to know is which trapezoid has a greater area, we need not bother with this step.

......!!!!!!!!...................................

RESPONSE -->

self critique assessment: 3

.................................................

......!!!!!!!!...................................

19:13:42

* `q005. Sketch graphs of y = x^2, y = 1/x and y = `sqrt(x) [note: `sqrt(x) means 'the square root of x'] for x > 0. We say that a graph increases if it gets higher as we move toward the right, and if a graph is increasing it has a positive slope. Explain which of the following descriptions is correct for each graph:

As we move from left to right the graph increases as its slope increases.

As we move from left to right the graph decreases as its slope increases.

As we move from left to right the graph increases as its slope decreases.

As we move from left to right the graph decreases as its slope decreases.

......!!!!!!!!...................................

RESPONSE -->

y=x^2

As we move from left to right the graph increases as it slope increases

y=1/x

as we move left to right the graph increases as its slop decreases

y='sqrtx

as we move left to right the graph decreases as the slope decreases

self critique assessment: 0

.................................................

......!!!!!!!!...................................

19:17:56

For x = 1, 2, 3, 4:

The function y = x^2 takes values 1, 4, 9 and 16, increasing more and more for each unit increase in x. This graph therefore increases, as you say, but at an increasing rate.

The function y = 1/x takes values 1, 1/2, 1/3 and 1/4, with decimal equivalents 1, .5, .33..., and .25. These values are decreasing, but less and less each time. The decreasing values ensure that the slopes are negative. However, the more gradual the decrease the closer the slope is to zero. The slopes are therefore negative numbers which approach zero.

Negative numbers which approach zero are increasing. So the slopes are increasing, and we say that the graph decreases as the slope increases.

We could also say that the graph decreases but by less and less each time. So the graph is decreasing at a decreasing rate.

For y = `sqrt(x) we get approximate values 1, 1.414, 1.732 and 2. This graph increases but at a decreasing rate.

......!!!!!!!!...................................

RESPONSE -->

It makes more sense now that I see the answer, I definately need to spend a little time on these. I have the graphs drawn right but Im confusing for example the (graph decreases as the slope increases and vica versa)

self critique assessment: 1

.................................................

......!!!!!!!!...................................

19:57:51

`q006. If the population of the frogs in your frog pond increased by 10% each month, starting with an initial population of 20 frogs, then how many frogs would you have at the end of each of the first three months (you can count fractional frogs, even if it doesn't appear to you to make sense)? Can you think of a strategy that would allow you to calculate the number of frogs after 300 months (according to this model, which probably wouldn't be valid for that long) without having to do at least 300 calculations?

......!!!!!!!!...................................

RESPONSE -->

1st month

20*.10=2

20+2=22 frogs

22*.10=2.2

22+2.2-24.2 frogs second month

24.2*.10=2.42

24.2+2.42=26.62 frogs third month

FV=PV(1+i)^n

fv=future value

pv=present value

i=percentage of growth

n=number of periods of growth.

I looked this formula up. Not sure if its right but I came up with

FV=20(1+.10)^300

FV=20(1.10)^300

FV=20(2.617011x10^12)

FV=5.23402199x10^13

confidence assessment: 0

.................................................

......!!!!!!!!...................................

19:59:58

At the end of the first month, the number of frogs in the pond would be (20 * .1) + 20 = 22 frogs. At the end of the second month there would be (22 * .1) + 22 = 24.2 frogs while at the end of the third month there would be (24.2 * .1) + 24.2 = 26.62 frogs.

The key to extending the strategy is to notice that multiplying a number by .1 and adding it to the number is really the same as simply multiplying the number by 1.1. 10 * 1.1 = 22; 22 * 1.1 = 24.2; etc.. So after 300 months you will have multiplied by 1.1 a total of 300 times. This would give you 20 * 1.1^300, whatever that equals (a calculator will easily do the arithmetic).

A common error is to say that 300 months at 10% per month gives 3,000 percent, so there would be 30 * 20 = 600 frogs after 30 months. That doesn't work because the 10% increase is applied to a greater number of frogs each time. 3000% would just be applied to the initial number, so it doesn't give a big enough answer.

......!!!!!!!!...................................

RESPONSE -->

self critique assessment: 3

.................................................

......!!!!!!!!...................................

20:09:47

`q007. Calculate 1/x for x = 1, .1, .01 and .001. Describe the pattern you obtain. Why do we say that the values of x are approaching zero? What numbers might we use for x to continue approaching zero? What happens to the values of 1/x as we continue to approach zero? What do you think the graph of y = 1/x vs. x looks for x values between 0 and 1?

......!!!!!!!!...................................

RESPONSE -->

The pattern is for every decimal place you move to the left you can add that many 0's back to 1 to get your answer for x

Not sure why we would say the values of x are approaching 0

.0001, .00001, .000001, and so on

A straight line decreasing

confidence assessment: 0

.................................................

......!!!!!!!!...................................

20:11:37

If x = .1, for example, 1 / x = 1 / .1 = 10 (note that .1 goes into 1 ten times, since we can count to 1 by .1, getting.1, .2, .3, .4, ... .9, 10. This makes it clear that it takes ten .1's to make 1.

So if x = .01, 1/x = 100 Ithink again of counting to 1, this time by .01). If x = .001 then 1/x = 1000, etc..

Note also that we cannot find a number which is equal to 1 / 0. Deceive why this is true, try counting to 1 by 0's. You can count as long as you want and you'll ever get anywhere.

The values of 1/x don't just increase, they increase without bound. If we think of x approaching 0 through the values .1, .01, .001, .0001, ..., there is no limit to how big the reciprocals 10, 100, 1000, 10000 etc. can become.

The graph becomes steeper and steeper as it approaches the y axis, continuing to do so without bound but never touching the y axis.

This is what it means to say that the y axis is a vertical asymptote for the graph .

......!!!!!!!!...................................

RESPONSE -->

Again I can see why I need to study these graphs more in the future when we come to these chapters

self critique assessment: 2

.................................................

......!!!!!!!!...................................

20:15:45

* `q008. At clock time t the velocity of a certain automobile is v = 3 t + 9. At velocity v its energy of motion is E = 800 v^2. What is the energy of the automobile at clock time t = 5?

......!!!!!!!!...................................

RESPONSE -->

V=3(5)+9

v=15+9

v=24

E=800*24^2

E=800*576

E=460,800 Energy of automobile at clock time t=5

self critique assessment:

.................................................

......!!!!!!!!...................................

20:18:01

* `q008. At clock time t the velocity of a certain automobile is v = 3 t + 9. At velocity v its energy of motion is E = 800 v^2. What is the energy of the automobile at clock time t = 5?

......!!!!!!!!...................................

RESPONSE -->

Not sure what happened to the program, I was on the question of clock time

V=3(5)+9

v=15+9

V=24

E=800*24^2

E=800(576)

E=460,800 when t=5

self critique assessment: 2

.................................................

Lϯ]lΆȥl

assignment #003

003. PC1 questions

qa initial problems

05-25-2009

|zٺϯ茹

assignment #003

003. PC1 questions

qa initial problems

05-25-2009

......!!!!!!!!...................................

20:20:36

`q001 A straight line connects the points (3, 5) and (7, 17), while another straight line continues on from (7, 17) to the point (10, 29). Which line is steeper and on what basis to you claim your result?

......!!!!!!!!...................................

RESPONSE -->

Im just trying to get back to the question I left off from earlier I will send both SEND FILES. Not sure what happened the program shut down on my computer and I lost where I started

confidence assessment:

.................................................

......!!!!!!!!...................................

20:20:53

The point (3,5) has x coordinate 3 and y coordinate 5. The point (7, 17) has x coordinate 7 and y coordinate 17. To move from (3,5) to (7, 17) we must therefore move 4 units in the x direction and 12 units in the y direction.

Thus between (3,5) and (7,17) the rise is 12 and the run is 4, so the rise/run ratio is 12/4 = 3.

Between (7,10) and (10,29) the rise is also 12 but the run is only 3--same rise for less run, therefore more slope. The rise/run ratio here is 12/3 = 4.

......!!!!!!!!...................................

RESPONSE -->

.

self critique assessment:

.................................................

......!!!!!!!!...................................

20:21:00

`q002. The expression (x-2) * (2x+5) is zero when x = 2 and when x = -2.5. Without using a calculator verify this, and explain why these two values of x, and only these two values of x, can make the expression zero.

......!!!!!!!!...................................

RESPONSE -->

.

confidence assessment:

.................................................

......!!!!!!!!...................................

20:21:08

If x = 2 then x-2 = 2 - 2 = 0, which makes the product (x -2) * (2x + 5) zero.

If x = -2.5 then 2x + 5 = 2 (-2.5) + 5 = -5 + 5 = 0.which makes the product (x -2) * (2x + 5) zero.

The only way to product (x-2)(2x+5) can be zero is if either (x -2) or (2x + 5) is zero.

Note that (x-2)(2x+5) can be expanded using the Distributive Law to get

x(2x+5) - 2(2x+5). Then again using the distributive law we get

2x^2 + 5x - 4x - 10 which simplifies to

2x^2 + x - 10.

However this doesn't help us find the x values which make the expression zero. We are better off to look at the factored form.

......!!!!!!!!...................................

RESPONSE -->

.

self critique assessment:

.................................................

......!!!!!!!!...................................

20:21:14

`q003. For what x values will the expression (3x - 6) * (x + 4) * (x^2 - 4) be zero?

......!!!!!!!!...................................

RESPONSE -->

.

confidence assessment:

.................................................

......!!!!!!!!...................................

20:21:20

In order for the expression to be zero we must have 3x-6 = 0 or x+4=0 or x^2-4=0.

3x-6 = 0 is rearranged to 3x = 6 then to x = 6 / 3 = 2. So when x=2, 3x-6 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

x+4 = 0 gives us x = -4. So when x=-4, x+4 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

x^2-4 = 0 is rearranged to x^2 = 4 which has solutions x = + - `sqrt(4) or + - 2. So when x=2 or when x = -2, x^2 - 4 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

We therefore see that (3x - 6) * (x + 4) * (x^2 - 4) = 0 when x = 2, or -4, or -2. These are the only values of x which can yield zero.**

......!!!!!!!!...................................

RESPONSE -->

.

self critique assessment:

.................................................

......!!!!!!!!...................................

20:21:26

`q004. One straight line segment connects the points (3,5) and (7,9) while another connects the points (10,2) and (50,4). From each of the four points a line segment is drawn directly down to the x axis, forming two trapezoids. Which trapezoid has the greater area? Try to justify your answer with something more precise than, for example, 'from a sketch I can see that this one is much bigger so it must have the greater area'.

......!!!!!!!!...................................

RESPONSE -->

.

confidence assessment:

.................................................

......!!!!!!!!...................................

20:21:32

Your sketch should show that while the first trapezoid averages a little more than double the altitude of the second, the second is clearly much more than twice as wide and hence has the greater area.

To justify this a little more precisely, the first trapezoid, which runs from x = 3 to x = 7, is 4 units wide while the second runs from x = 10 and to x = 50 and hence has a width of 40 units. The altitudes of the first trapezoid are 5 and 9,so the average altitude of the first is 7. The average altitude of the second is the average of the altitudes 2 and 4, or 3. So the first trapezoid is over twice as high, on the average, as the first. However the second is 10 times as wide, so the second trapezoid must have the greater area.

This is all the reasoning we need to answer the question. We could of course multiply average altitude by width for each trapezoid, obtaining area 7 * 4 = 28 for the first and 3 * 40 = 120 for the second. However if all we need to know is which trapezoid has a greater area, we need not bother with this step.

......!!!!!!!!...................................

RESPONSE -->

.

self critique assessment:

.................................................

......!!!!!!!!...................................

20:21:36

* `q005. Sketch graphs of y = x^2, y = 1/x and y = `sqrt(x) [note: `sqrt(x) means 'the square root of x'] for x > 0. We say that a graph increases if it gets higher as we move toward the right, and if a graph is increasing it has a positive slope. Explain which of the following descriptions is correct for each graph:

As we move from left to right the graph increases as its slope increases.

As we move from left to right the graph decreases as its slope increases.

As we move from left to right the graph increases as its slope decreases.

As we move from left to right the graph decreases as its slope decreases.

......!!!!!!!!...................................

RESPONSE -->

.

self critique assessment:

.................................................

......!!!!!!!!...................................

20:21:40

For x = 1, 2, 3, 4:

The function y = x^2 takes values 1, 4, 9 and 16, increasing more and more for each unit increase in x. This graph therefore increases, as you say, but at an increasing rate.

The function y = 1/x takes values 1, 1/2, 1/3 and 1/4, with decimal equivalents 1, .5, .33..., and .25. These values are decreasing, but less and less each time. The decreasing values ensure that the slopes are negative. However, the more gradual the decrease the closer the slope is to zero. The slopes are therefore negative numbers which approach zero.

Negative numbers which approach zero are increasing. So the slopes are increasing, and we say that the graph decreases as the slope increases.

We could also say that the graph decreases but by less and less each time. So the graph is decreasing at a decreasing rate.

For y = `sqrt(x) we get approximate values 1, 1.414, 1.732 and 2. This graph increases but at a decreasing rate.

......!!!!!!!!...................................

RESPONSE -->

.

self critique assessment:

.................................................

......!!!!!!!!...................................

20:21:45

`q006. If the population of the frogs in your frog pond increased by 10% each month, starting with an initial population of 20 frogs, then how many frogs would you have at the end of each of the first three months (you can count fractional frogs, even if it doesn't appear to you to make sense)? Can you think of a strategy that would allow you to calculate the number of frogs after 300 months (according to this model, which probably wouldn't be valid for that long) without having to do at least 300 calculations?

......!!!!!!!!...................................

RESPONSE -->

.

confidence assessment:

.................................................

......!!!!!!!!...................................

20:21:50

At the end of the first month, the number of frogs in the pond would be (20 * .1) + 20 = 22 frogs. At the end of the second month there would be (22 * .1) + 22 = 24.2 frogs while at the end of the third month there would be (24.2 * .1) + 24.2 = 26.62 frogs.

The key to extending the strategy is to notice that multiplying a number by .1 and adding it to the number is really the same as simply multiplying the number by 1.1. 10 * 1.1 = 22; 22 * 1.1 = 24.2; etc.. So after 300 months you will have multiplied by 1.1 a total of 300 times. This would give you 20 * 1.1^300, whatever that equals (a calculator will easily do the arithmetic).

A common error is to say that 300 months at 10% per month gives 3,000 percent, so there would be 30 * 20 = 600 frogs after 30 months. That doesn't work because the 10% increase is applied to a greater number of frogs each time. 3000% would just be applied to the initial number, so it doesn't give a big enough answer.

......!!!!!!!!...................................

RESPONSE -->

.

self critique assessment:

.................................................

......!!!!!!!!...................................

20:21:58

`q007. Calculate 1/x for x = 1, .1, .01 and .001. Describe the pattern you obtain. Why do we say that the values of x are approaching zero? What numbers might we use for x to continue approaching zero? What happens to the values of 1/x as we continue to approach zero? What do you think the graph of y = 1/x vs. x looks for x values between 0 and 1?

......!!!!!!!!...................................

RESPONSE -->

.

confidence assessment:

.................................................

......!!!!!!!!...................................

20:22:02

If x = .1, for example, 1 / x = 1 / .1 = 10 (note that .1 goes into 1 ten times, since we can count to 1 by .1, getting.1, .2, .3, .4, ... .9, 10. This makes it clear that it takes ten .1's to make 1.

So if x = .01, 1/x = 100 Ithink again of counting to 1, this time by .01). If x = .001 then 1/x = 1000, etc..

Note also that we cannot find a number which is equal to 1 / 0. Deceive why this is true, try counting to 1 by 0's. You can count as long as you want and you'll ever get anywhere.

The values of 1/x don't just increase, they increase without bound. If we think of x approaching 0 through the values .1, .01, .001, .0001, ..., there is no limit to how big the reciprocals 10, 100, 1000, 10000 etc. can become.

The graph becomes steeper and steeper as it approaches the y axis, continuing to do so without bound but never touching the y axis.

This is what it means to say that the y axis is a vertical asymptote for the graph .

......!!!!!!!!...................................

RESPONSE -->

.

self critique assessment:

.................................................

......!!!!!!!!...................................

20:23:26

* `q008. At clock time t the velocity of a certain automobile is v = 3 t + 9. At velocity v its energy of motion is E = 800 v^2. What is the energy of the automobile at clock time t = 5?

......!!!!!!!!...................................

RESPONSE -->

Here is where I left off on my other program. I am going to send both send files

v=3(5)+9

v=15+9

v=24

E=800(24)^2

E=800*576

E=460,800 when clock time t=5

self critique assessment: 2

.................................................

......!!!!!!!!...................................

20:23:52

......!!!!!!!!...................................

RESPONSE -->

self critique assessment:

.................................................

......!!!!!!!!...................................

20:23:57

......!!!!!!!!...................................

RESPONSE -->

self critique assessment:

.................................................

......!!!!!!!!...................................

20:25:39

For t=5, v = 3 t + 9 = (3*5) + 9 = 24. Therefore E = 800 * 24^2 = 460800.

......!!!!!!!!...................................

RESPONSE -->

Not sure what happened. The self critique menu popped up even this time before the answer to the problem showed up on my program. I had to click the next question/answer button 2 times before your answer to the problem showed up.

self critique assessment: 2

.................................................

......!!!!!!!!...................................

20:39:20

* `q009. Continuing the preceding problem, can you give an expression for E in terms of t?

......!!!!!!!!...................................

RESPONSE -->

All I can come up with is t= (v+9)/3

self critique assessment: 1

.................................................

......!!!!!!!!...................................

20:42:10

Since v = 3 t + 9 the expression would be E = 800 v^2 = 800 ( 3t + 9) ^2. This is the only answer really required here.

For further reference, though, note that this expression could also be expanded by applying the Distributive Law:.

Since (3t + 9 ) ^ 2 = (3 t + 9 ) * ( 3 t + 9 ) = 3t ( 3t + 9 ) + 9 * (3 t + 9) = 9 t^2 + 27 t + 27 t + 81 = 9 t^2 + 54 t + 81, we get

E = 800 ( 9 t^2 + 54 t + 81) = 7200 t^2 + 43320 t + 64800 (check my multiplication because I did that in my head, which isn't always reliable).

......!!!!!!!!...................................

RESPONSE -->

I need to brush up a little more on my distributive laws as well I can see where they are going to come in very handy.

self critique assessment: 2

.................................................

"