Precalculus Orientation

#$&*

course Mth 163

*********************************************

Question: `q001 A straight line connects the points (3, 5) and (7, 17), while another straight line continues on from (7, 17) to the point (10, 29). Which line is steeper and on what basis to you claim your result?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

The line connecting (3,5) and (7,17) has a slope of 3 and the line connecting (7,17) and (10,29) has a slope of 4. I got those answers from using the formula (y2-y1)/ (x2-x1).

confidence rating #$&*:3

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aThe point (3,5) has x coordinate 3 and y coordinate 5. The point (7, 17) has x coordinate 7 and y coordinate 17. To move from (3,5) to (7, 17) we must therefore move 4 units in the x direction and 12 units in the y direction.

Thus between (3,5) and (7,17) the rise is 12 and the run is 4, so the rise/run ratio is 12/4 = 3.

Between (7,10) and (10,29) the rise is also 12 but the run is only 3--same rise for less run, therefore more slope. The rise/run ratio here is 12/3 = 4.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):OK

------------------------------------------------

Self-critique Rating:Ok

*********************************************

Question: `q002. The expression (x-2) * (2x+5) is zero when x = 2 and when x = -2.5. Without using a calculator verify this, and explain why these two values of x, and only these two values of x, can make the expression zero.

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

When you subtract 2-2 you get 0, so 0 multiplied by (4+5)=0.

When you multiply 2 times -2.5 you get -5, so -5+5=0, and when you multiply that by -4.5 it equals 0.

confidence rating #$&*:3

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aIf x = 2 then x-2 = 2 - 2 = 0, which makes the product (x -2) * (2x + 5) zero.

If x = -2.5 then 2x + 5 = 2 (-2.5) + 5 = -5 + 5 = 0.which makes the product (x -2) * (2x + 5) zero.

The only way to product (x-2)(2x+5) can be zero is if either (x -2) or (2x + 5) is zero.

Note that (x-2)(2x+5) can be expanded using the Distributive Law to get

x(2x+5) - 2(2x+5). Then again using the distributive law we get

2x^2 + 5x - 4x - 10 which simplifies to

2x^2 + x - 10.

However this doesn't help us find the x values which make the expression zero. We are better off to look at the factored form.

STUDENT QUESTION

I think I have the basic understanding of how x=2 and x=-2.5 makes this equation 0

I was looking at the distributive law and I understand the basic distributive property as stated in algebra

a (b + c) = ab + ac and a (b-c) = ab - ac

but I don’t understand the way it is used here

(x-2)(2x+5)

x(2x+5) - 2(2x+5)

2x^2 + 5x - 4x - 10

2x^2 + x - 10.

Would you mind explaining the steps to me?

INSTRUCTOR RESPONSE

The distributive law of multiplication over addition states that

a (b + c) = ab + ac

and also that

(a + b) * c = a c + b c.

So the distributive law has two forms.

In terms of the second form it should be clear that, for example

(x - 2) * c = x * c - 2 * c.

Now if c = 2 x + 5 this reads

(x-2)(2x+5) = x * ( 2 x + 5) - 2 * (2 x + 5).

The rest should be obvious.

We could also have used the first form.

a ( b + c) = ab + ac so, letting a stand for (x - 2), we have

(x-2)(2x+5) = ( x - 2 ) * 2x + (x - 2) * 5.

This will ultimately give the same result as the previous. Either way we end up with 2 x^2 + x - 10.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):ok

------------------------------------------------

Self-critique Rating: ok

*********************************************

Question: `q003. For what x values will the expression (3x - 6) * (x + 4) * (x^2 - 4) be zero?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

-4, and 2 because when you use the quadratic formula -b+-sqrtb^2-4ac(all over)/ 2a those are the answers

confidence rating #$&*:3

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aIn order for the expression to be zero we must have 3x-6 = 0 or x+4=0 or x^2-4=0.

3x-6 = 0 is rearranged to 3x = 6 then to x = 6 / 3 = 2. So when x=2, 3x-6 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

x+4 = 0 gives us x = -4. So when x=-4, x+4 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

x^2-4 = 0 is rearranged to x^2 = 4 which has solutions x = + - `sqrt(4) or + - 2. So when x=2 or when x = -2, x^2 - 4 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero.

We therefore see that (3x - 6) * (x + 4) * (x^2 - 4) = 0 when x = 2, or -4, or -2. These are the only values of x which can yield zero.**

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

The approach that I took was different, but in my opinion easier.

------------------------------------------------

Self-critique Rating: ok

@&

It's very good that you know the quadratic formula and know how to use it to find the zeros of a quadratic expression. That was good thinking.

However the expression, when multiplied out, would be

3 x^4 + 6 x^3 - 36 x^2 - 24 x + 96

This is a fourth-degree polynomial and the quadratic formula can't be applied, except to a quadratic polynomial.

There is a method for solving degree-4 polynomials, but it's complicated and challenging to understand.

It's also interesting that there is no general way to solve a polynomial of degree 5 or greater.

In any case, the only reasonable way to solve an equation of degree 4 is to factor it (which is sometimes possible, but often impossible). On this question, of course, I gave you the factored form.

Note that you missed the fact that -2 is also a solution.

*@

*********************************************

Question: `q004. One straight line segment connects the points (3,5) and (7,9) while another connects the points (10,2) and (50,4). From each of the four points a line segment is drawn directly down to the x axis, forming two trapezoids. Which trapezoid has the greater area? Try to justify your answer with something more precise than, for example, 'from a sketch I can see that this one is much bigger so it must have the greater area'.

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

The trapezoid at (10,2) and (50,4) has a much larger area because when you use the formula A = ½ (b1 + b2) * h the area is bigger.

confidence rating #$&*:2

@&

Good.

As shown in the given solution, it's not necessary to use the formula in this case. It's fine to do so, but sometimes you don't have a formula and then you might have to approach the problem using the sort of reasoning displayed there.

*@

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aYour sketch should show that while the first trapezoid averages a little more than double the altitude of the second, the second is clearly much more than twice as wide and hence has the greater area.

To justify this a little more precisely, the first trapezoid, which runs from x = 3 to x = 7, is 4 units wide while the second runs from x = 10 and to x = 50 and hence has a width of 40 units. The altitudes of the first trapezoid are 5 and 9,so the average altitude of the first is 7. The average altitude of the second is the average of the altitudes 2 and 4, or 3. So the first trapezoid is over twice as high, on the average, as the first. However the second is 10 times as wide, so the second trapezoid must have the greater area.

This is all the reasoning we need to answer the question. We could of course multiply average altitude by width for each trapezoid, obtaining area 7 * 4 = 28 for the first and 3 * 40 = 120 for the second. However if all we need to know is which trapezoid has a greater area, we need not bother with this step.

*********************************************

Question: `q005. Sketch graphs of y = x^2, y = 1/x and y = `sqrt(x) [note: `sqrt(x) means 'the square root of x'] for x > 0. We say that a graph increases if it gets higher as we move toward the right, and if a graph is increasing it has a positive slope. Explain which of the following descriptions is correct for each graph:

As we move from left to right the graph increases as its slope increases.

As we move from left to right the graph decreases as its slope increases.

As we move from left to right the graph increases as its slope decreases.

As we move from left to right the graph decreases as its slope decreases.

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

Y=x^2 is a parabola, so it is increasing at an increasing rate.

Y=1/x is a hyperbola, so it the graph decreases as the rate of change increases.

Y=sqrt(x) is the square root function, so the graph increases as the slope decreases.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aFor x = 1, 2, 3, 4:

The function y = x^2 takes values 1, 4, 9 and 16, increasing more and more for each unit increase in x. This graph therefore increases, as you say, but at an increasing rate.

The function y = 1/x takes values 1, 1/2, 1/3 and 1/4, with decimal equivalents 1, .5, .33..., and .25. These values are decreasing, but less and less each time. The decreasing values ensure that the slopes are negative. However, the more gradual the decrease the closer the slope is to zero. The slopes are therefore negative numbers which approach zero.

Negative numbers which approach zero are increasing. So the slopes are increasing, and we say that the graph decreases as the slope increases.

We could also say that the graph decreases but by less and less each time. So the graph is decreasing at a decreasing rate.

For y = `sqrt(x) we get approximate values 1, 1.414, 1.732 and 2. This graph increases but at a decreasing rate.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):ok

------------------------------------------------

Self-critique Rating:ok

*********************************************

Question: `q006. If the population of the frogs in your frog pond increased by 10% each month, starting with an initial population of 20 frogs, then how many frogs would you have at the end of each of the first three months (you can count fractional frogs, even if it doesn't appear to you to make sense)? Can you think of a strategy that would allow you to calculate the number of frogs after 300 months (according to this model, which probably wouldn't be valid for that long) without having to do at least 300 calculations?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

To figure out how many frogs there will be after three months you take 10% of 20 which is 2. Then you multiply 2 by the number of months you want to know (3) and add the product to the original 20, so the total number of frogs after three months is 26. You can do the same with 300 months. Assuming the frog population is only increasing by 10% each month, you would multiply 300*2=600 and add that to 20. With a final total of 62 frogs.

confidence rating #$&*:1

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aAt the end of the first month, the number of frogs in the pond would be (20 * .1) + 20 = 22 frogs. At the end of the second month there would be (22 * .1) + 22 = 24.2 frogs while at the end of the third month there would be (24.2 * .1) + 24.2 = 26.62 frogs.

The key to extending the strategy is to notice that multiplying a number by .1 and adding it to the number is really the same as simply multiplying the number by 1.1. We therefore get

20 * 1.1 = 22 frogs after the first month

22 * 1.1 = 24.2 after the second month

etc., multiplying by for 1.1 each month.

So after 300 months we will have multiplied by 1.1 a total of 300 times. This would give us 20 * 1.1^300, whatever that equals (a calculator, which is appropriate in this situation, will easily do the arithmetic).

A common error is to say that 300 months at 10% per month gives 3,000 percent, so there would be 30 * 20 = 600 frogs after 30 months. That doesn't work because the 10% increase is applied to a greater number of frogs each time. 3000% would just be applied to the initial number, so it doesn't give a big enough answer.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

Instead of taking 10% of the new amount at the end of the month I kept adding the 10% of the original number. I was correct when I went and did it again.

------------------------------------------------

Self-critique Rating:

*********************************************

Question: `q007. Calculate 1/x for x = 1, .1, .01 and .001. Describe the pattern you obtain. Why do we say that the values of x are approaching zero? What numbers might we use for x to continue approaching zero? What happens to the values of 1/x as we continue to approach zero? What do you think the graph of y = 1/x vs. x looks for x values between 0 and 1?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

1/1=1

1/.1=10

1/.01=100

1/.001=100

The pattern is a zero added each time or you could look at it as .1 is the tens place, .01 is the hundreds place, and .001 is the thousands place. We say the x values are approaching zero because they will continue to get smaller and smaller, but they will never equal zero. Other numbers we could us would be .0001, .00001, etc. The numbers of 1/x will get larger and larger as we approach zero. The graph would continue to approach the axis, but it would never touch or cross zero (there is an asymptote there)

confidence rating #$&*: 3

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aIf x = .1, for example, 1 / x = 1 / .1 = 10 (note that .1 goes into 1 ten times, since we can count to 1 by .1, getting.1, .2, .3, .4, ... .9, 10. This makes it clear that it takes ten .1's to make 1.

So if x = .01, 1/x = 100 Ithink again of counting to 1, this time by .01). If x = .001 then 1/x = 1000, etc..

Note also that we cannot find a number which is equal to 1 / 0. Deceive why this is true, try counting to 1 by 0's. You can count as long as you want and you'll ever get anywhere.

The values of 1/x don't just increase, they increase without bound. If we think of x approaching 0 through the values .1, .01, .001, .0001, ..., there is no limit to how big the reciprocals 10, 100, 1000, 10000 etc. can become.

The graph becomes steeper and steeper as it approaches the y axis, continuing to do so without bound but never touching the y axis.

This is what it means to say that the y axis is a vertical asymptote for the graph .

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):Good

------------------------------------------------

Self-critique Rating:ok

*********************************************

Question: `q008. At clock time t the velocity of a certain automobile is v = 3 t + 9. At velocity v its energy of motion is E = 800 v^2. What is the energy of the automobile at clock time t = 5?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

The energy would be 460,800. This is one type of a direct variation. 3(5)+9+24, and E=800(24^2)

confidence rating #$&*:3

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aFor t=5, v = 3 t + 9 = (3*5) + 9 = 24. Therefore E = 800 * 24^2 = 460800.

*********************************************

Question: `q009. Continuing the preceding problem, can you give an expression for E in terms of t?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution:

E=800 [(3t +9)^2]

confidence rating #$&*:3

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

`aSince v = 3 t + 9 the expression would be E = 800 v^2 = 800 ( 3t + 9) ^2. This is the only answer really required here.

For further reference, though, note that this expression could also be expanded by applying the Distributive Law:.

Since (3t + 9 ) ^ 2 = (3 t + 9 ) * ( 3 t + 9 ) = 3t ( 3t + 9 ) + 9 * (3 t + 9) = 9 t^2 + 27 t + 27 t + 81 = 9 t^2 + 54 t + 81, we get

E = 800 ( 9 t^2 + 54 t + 81) = 7200 t^2 + 43320 t + 64800 (check my multiplication because I did that in my head, which isn't always reliable).

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):ok

------------------------------------------------

Self-critique Rating:ok

"

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

"

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

#*&!

@&

You're doing great, but you did have at least one error (more like an omission), so be sure to see the notes I inserted into your work.

*@