course Mth 164 1/22 4pm If your solution to stated problem does not match the given solution, you should self-critique per instructions athttp://vhcc2.vhcc.edu/dsmith/geninfo/labrynth_created_fall_05/levl1_22/levl2_81/file3_259.htm
.............................................
Given Solution: The rate at which you are earning money is the number of dollars per hour you are earning. You are earning money at the rate of 50 dollars / (5 hours) = 10 dollars / hour. It is very likely that you immediately came up with the $10 / hour because almosteveryone is familiar with the concept of the pay rate, the number of dollars per hour. Note carefully that the pay rate is found by dividing the quantity earned by the time required to earn it. Time rates in general are found by dividing an accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q003.If you make $60,000 per year then how much do you make per month? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: If I make $60,000 in 1 year I would be making money at the rate of (60,000/12=5,000) $5,000 per month. This rate per month was earned by dividing the the total amount made ($60,000) by the number of months it took to make the money (12) which equals $5,000 per month. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: Most people will very quickly see that we need to divide $60,000 by 12 months, giving us 60,000 dollars / (12 months) = 5000 dollars / month. Note that again we have found a time rate, dividing the accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q004. Suppose that the $60,000 is made in a year by a small business. Would be more appropriate to say that the business makes $5000 per month, or that the business makes an average of $5000 per month? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: When talking about the amount of money a small business makes in a year, it would probably be more appropriate to say the the business makes $60,000 per year than $5,000 per month because a business typically would not make the same amount of money each month as would a single employee or person. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: Small businesses do not usually make the same amount of money every month. The amount made depends on the demand for the services or commodities provided by the business, and there are often seasonal fluctuations in addition to other market fluctuations. It is almost certain that a small business making $60,000 per year will make more than $5000 in some months and less than $5000 in others. Therefore it is much more appropriate to say that the business makes and average of $5000 per month. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): Ok ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q005. If you travel 300 miles in 6 hours, at what average rate are you covering distance, and why do we say average rate instead of just plain rate? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: If I traveled 300 miles in 6 hours the average rate at which I would have covered the distance would be (300/6=50) 50. If we take the total number of miles covered (300) and divide that by the number of hours it took to travel that distance (6) we would get an average rate of 50. It would not accurate to state 50 as a plain rate because when traveling it would be nearly impossible to travel at a constant rate of 50 due to other traffic or any other intertuptions in the travel. More than likely the rate or speed of travel would flucuate between a higher and lower speed than 50 during the entire 300 mile trip. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The average rate is 50 miles per hour, or 50 miles / hour. This is obtained by dividing the accumulated quantity, the 300 miles, by the time required to accumulate it, obtaining ave rate = 300 miles / ( 6 hours) = 50 miles / hour. Note that the rate at which distance is covered is called speed. The car has an average speed of 50 miles/hour. We say 'average rate' in this case because it is almost certain that slight changes in pressure on the accelerator, traffic conditions and other factors ensure that the speed will sometimes be greater than 50 miles/hour and sometimes less than 50 miles/hour; the 50 miles/hour we obtain from the given information is clearly and overall average of the velocities. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): I did not think about speed being referred to as velocity although now that it has been brought to my attention I do understand. ------------------------------------------------ Self-critique rating #$&*: 3 ********************************************* Question: `q006. If you use 60 gallons of gasoline on a 1200 mile trip, then at what average rate are you using gasoline, with respect to miles traveled? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: If I use 60 gallons of gasoline on a trip of 1,200 mile the average rate at which I would be using gasoline would be (1,200/60) 20 miles per gallon. I found this rate by dividing the 1,200 mile trip by the 60 gallons of gasoline that was used giving me 20 miles per gallon. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The rate of change of one quantity with respect to another is the change in the first quantity, divided by the change in the second. As in previous examples, we found the rate at which money was made with respect to time by dividing the amount of money made by the time required to make it. By analogy, the rate at which we use fuel with respect to miles traveled is the change in the amount of fuel divided by the number of miles traveled. In this case we use 60 gallons of fuel in 1200 miles, so the average rate it 60 gal / (1200 miles) = .05 gallons / mile. Note that this question didn't ask for miles per gallon. Miles per gallon is an appropriate and common calculation, but it measures the rate at which miles are covered with respect to the amount of fuel used. Be sure you see the difference. Note that in this problem we again have here an example of a rate, but unlike previous instances this rate is not calculated with respect to time. This rate is calculated with respect to the amount of fuel used. We divide the accumulated quantity, in this case miles, by the amount of fuel required to cover t miles. Note that again we call the result of this problem an average rate because there are always at least subtle differences in driving conditions that result in more or fewer miles covered with a certain amount of fuel. It's very important to understand the phrase 'with respect to'. Whether the calculation makes sense or not, it is defined by the order of the terms. In this case gallons / mile tells you how many gallons you are burning, on the average, per mile. This concept is not as familiar as miles / gallon, but except for familiarity it's technically no more difficult. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): In my solution I calculated for mile per gallon. I do, after reading the given solution understand that I did not solve for the rate at which is in respect to the amount of fuel used. By dividing the accumulated quantity of miles by the amount of fuel required to cover those miles the result we get would be the average rate which in this case is (60gal/1200miles=.05 gallons/mile) .05 gallons/mile. ------------------------------------------------ Self-critique rating #$&*: 3 ********************************************* Question: `q007. The word 'average' generally connotes something like adding two quantities and dividing by 2, or adding several quantities and dividing by the number of quantities we added. Why is it that we are calculating average rates but we aren't adding anything? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: When we talk about getting the average of something the typical process would be to add the different components of that something and then divide by the number of somethings that we had. In the examples we have been given we have not been adding anything because because the addition of the components have already been done prior to giving us the quantities stated in the problems. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The word 'average' in the context of the dollars / month, miles / gallon types of questions we have been answering was used because we expect that in different months different amounts were earned, or that over different parts of the trip the gas mileage might have varied, but that if we knew all the individual quantities (e.g., the dollars earned each month, the number of gallons used with each mile) and averaged them in the usual manner, we would get the .05 gallons / mile, or the $5000 / month. In a sense we have already added up all the dollars earned in each month, or the miles traveled on each gallon, and we have obtained the total $60,000 or 1200 miles. Thus when we divide by the number of months or the number of gallons, we are in fact calculating an average rate. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q008. In a study of how lifting strength is influenced by various ways of training, a study group was divided into 2 subgroups of equally matched individuals. The first group did 10 pushups per day for a year and the second group did 50 pushups per day for year. At the end of the year to lifting strength of the first group averaged 147 pounds, while that of the second group averaged 162 pounds. At what average rate did lifting strength increase per daily pushup? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: In order to calculate the average rate at which the lifting strength increases per day based upon two different groups that trained separately (first group did 10 pushups a day for one year and second group did 50 pushups a day for one year) we must use the average lifting strengths after the years times (first group lifted 147lbs. and second group lifted 162lbs) to calculate an average strength increase. We can do this by calculating the difference bewteen the number of pushups per day that each group did (50-10=40) and calculating the difference between the average amounts of weight each group could lift after the year of training (162-147=15). With these two calculations we would then divide the difference of the number of pushups done per day (40) by the difference between the average amount of weight each group could lift after the year (15), making the equation 15/40=.375. In other words 15 lbs./40 pushups=.375 lbs/pushup. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The second group had 15 pounds more lifting strength as a result of doing 40 more daily pushups than the first. The desired rate is therefore 15 pounds / 40 pushups = .375 pounds / pushup. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. STUDENT COMMENT: I have a question with respect as to how the question is interpreted. I used the interpretation given in the solution to question 008 to rephrase the question in 009, but I do not see how this is the correct interpretation of the question as stated. INSTRUCTOR RESPONSE: This exercise is designed to both see what you understand about rates, and to challenge your understanding a bit with concepts that aren't always familiar to students, despite their having completed the necessary prerequisite courses. The meaning of the rate of change of one quantity with respect to another is of central importance in the application of mathematics. This might well be your first encounter with this particular phrasing, so it might well be unfamiliar to you, but it is important, unambiguous and universal. You've taken the first step, which is to correctly apply the wordking of the preceding example to the present question. You'll have ample opportunity in your course to get used to this terminology, and plenty of reinforcement. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q009. In another part of the study, participants all did 30 pushups per day, but one group did pushups with a 10-pound weight on their shoulders while the other used a 30-pound weight. At the end of the study, the first group had an average lifting strength of 171 pounds, while the second had an average lifting strength of 188 pounds. At what average rate did lifting strength increase with respect to the added shoulder weight? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: Similiar to the last question, the difference in the amount of weight that was added to the to different groups shoulders while doing the pushups was 20lbs. (30-10=20).The average difference in lifting strength between the two different groups at the end of the study was 17lbs (188-171=17). Therefore if we divide the average differance in lifting strength at the end of the study (17) into the difference between added weight that was place on the shoulders of the participants doing pushups (20) we see that 17/20=.85. In other words, 17 lifting lbs./20 added lbs. equals .85 lifting lbs/lb. of added weight. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The difference in lifting strength was 17 pounds, as a result of a 20 pound difference in added weight. The average rate at which strength increases with respect added weight would therefore be 17 lifting pounds / (20 added pounds) = .85 lifting pounds / added pound. The strength advantage was .85 lifting pounds per pound of added weight, on the average. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q010. During a race, a runner passes the 100-meter mark 12 seconds after the start and the 200-meter mark 22 seconds after the start. At what average rate was the runner covering distance between those two positions? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: If a runner passed the 100 meter mark after 12 seconds from the start and passed the 200 meter mark after 22 seconds from the start I would need to calculate the difference between the 100 and 200 meter marks and the difference between the 12 second time and 22 second times and then divide the difference in times by the difference in meter mark distances. Therefore, 200-100=100 meters difference and 22-12=10 seconds difference. Thus, the average rate at which the distance between the two positions was covered is 10m meters/second (100/10=10). confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The runner traveled 100 meters between the two positions, and required 10 seconds to do so. The average rate at which the runner was covering distance was therefore 100 meters / (10 seconds) = 10 meters / second. Again this is an average rate; at different positions in his stride the runner would clearly be traveling at slightly different speeds. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. STUDENT QUESTION Is there a formula for this is it d= r*t or distance equal rate times time?????????????????? INSTRUCTOR RESPONSE That formula would apply in this specific situation. The goal is to learn to use the general concept of rate of change. The situation of this problem, and the formula you quote, are just one instance of a general concept that applies far beyond the context of distance and time. It's fine if the formula helps you understand the general concept of rate. Just be sure you work to understand the broader concept. Note also that we try to avoid using d for the name of a variable. The letter d will come to have a specific meaning in the context of rates, and to use d as the name of a variable invite confusion. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q011. During a race, a runner passes the 100-meter mark moving at 10 meters / second, and the 200-meter mark moving at 9 meters / second. What is your best estimate of how long it takes the runner to cover the 100 meter distance? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: If a runner passed the 100 meter mark at 10 meters/second from the and passed the 200 meter mark at 9 meters/second I would need to calculate the difference between the 100 and 200 meter marks and the average between the 10 meters/second and 9 meters/second and then divide the average of meters/second by the difference in meter mark distances. Therefore, 200-100=100 meters difference and 10+9=19/2=9.5 meters/second. Thus, my estimate of how long it will take the runner to cover 100 meter distance would be 10.5sec (100meters/9.5meters/second=10.5 sec). confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: At 10 meters/sec, the runner would require 10 seconds to travel 100 meters. However the runner seems to be slowing, and will therefore require more than 10 seconds to travel the 100 meters. We don't know what the runner's average speed is, we only know that it goes from 10 m/s to 9 m/s. The simplest estimate we could make would be that the average speed is the average of 10 m/s and 9 m/s, or (10 m/s + 9 m/s ) / 2 = 9.5 m/s. Taking this approximation as the average rate, the time required to travel 100 meters will be (100 meters) / (9.5 m/s) = 10.5 sec, approx.. Note that simply averaging the 10 m/s and the 9 m/s might not be the best way to approximate the average rate--for example we if we knew enough about the situation we might expect that this runner would maintain the 10 m/s for most of the remaining 100 meters, and simply tire during the last few seconds. However we were not given this information, and we don't add extraneous assumptions without good cause. So the approximation we used here is pretty close to the best we can do with the given information. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ------------------------------------------------ Self-critique rating #$&*: ********************************************* Question: `q012. We just averaged two quantities, adding them and dividing by 2, to find an average rate. We didn't do that before. Why we do it now? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: We had to average to quantities by adding them together and then dividing by 2 in the previous example because the rate at which the runner passed the designated meter marks were different. Therefore, if we had not taken an average of this amount our calculations would have not been accurate because it would not have taken all of the given information into account. In the previous examples the averaged data was presented to us therefore indicating that the averaging process had already been completed. confidence rating #$&*: OK ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: In previous examples the quantities weren't rates. We were given the amount of change of some accumulating quantity, and the change in time or in some other quantity on which the first was dependent (e.g., dollars and months, miles and gallons). Here we are given 2 rates, 10 m/s and 9 m/s, in a situation where we need an average rate in order to answer a question. Within this context, averaging the 2 rates was an appropriate tactic. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes. STUDENT QUESTION: I thought the change of an accumulating quantity was the rate? INSTRUCTOR RESPONSE: Quick response: The rate is not just the change in the accumulating quantity; if we're talking about a 'time rate' it's the change in the accumulating quantity divided by the time interval (or in calculus the limiting value of this ratio as the time interval approaches zero). More detailed response: If quantity A changes with respect to quantity B, then the average rate of change of A with respect to B (i.e., change in A / change in B) is 'the rate'. If the B quantity is clock time, then 'the rate' tells you 'how fast' the A quantity accumulates. However the rate is not just the change in the quantity A (i.e., the change in the accumulating quantity), but change in A / change in B. For students having had at least a semester of calculus at some level: Of course the above generalizes into the definition of the derivative. y ' (x) is the instantaneous rate at which the y quantity changes with respect to x. y ' (x) is the rate at which y accumulates with respect to x. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique Rating