course Phy 201
ph1 query 0Most queries in this course will ask you questions about class notes, readings, text problems and experiments. Since the first two assignments have been lab-related, the first two queries are related to the those exercises. While the remaining queries in this course are in question-answer format, the first two will be in the form of open-ended questions. Interpret these questions and answer them as best you can.
Different first-semester courses address the issues of experimental precision, experimental error, reporting of results and analysis in different ways and at different levels. One purpose of these initial lab exercises is to familiarize your instructor with your work and you with the instructor 's expectations.
Comment on your experience with the three lab exercises you encountered in this assignment or in recent assignments.
*********************************************
Question: This question, related to the use of the TIMER program in an experimental situation, is posed in terms of a familiar first-semester system.
Suppose you use a computer timer to time a steel ball 1 inch in diameter rolling down a straight wooden incline about 50 cm long. If the computer timer indicates that on five trials the times of an object down an incline are 2.42sec, 2.56 sec, 2.38 sec, 2.47 sec and 2.31 sec, then to what extent do you think the discrepancies could be explained by each of the following:
• The lack of precision of the TIMER program.
To what extent to you think the discrepancies are explained by this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv The timer may be off by .01 sec.
• The uncertain precision of human triggering (uncertainty associated with an actual human finger on a computer mouse)
To what extent to you think the discrepancies are explained by this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Human triggering adds much to the discrepancies. The Eye can be deceived, and send the finger the wrong message when to click. Thus making a quick response or delay in response.
• Actual differences in the time required for the object to travel the same distance.
To what extent to you think the discrepancies are explained by this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv The instance of the steel ball traveling down the steel ramp as compared to the wooden surface caused different results. Surfaces react differently to eachother.
• Differences in positioning the object prior to release.
To what extent to you think the discrepancies are explained by this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Positioning an object can make a difference in speed, the higher placement on a ramp, the longer string of a pendulum, or shorter string of a pendulum.
• Human uncertainty in observing exactly when the object reached the end of the incline.
To what extent to you think the discrepancies are explained by this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv What has helped is taking a movie and replaying the experiment in stop action. Observations on reaching the end of an incline often have to be repeated several times.
*********************************************
Question: How much uncertainty do you think each of the following would actually contribute to the uncertainty in timing a number of trials for the ball-down-an-incline lab?
• The lack of precision of the TIMER program.
To what extent to you think this factor would contribute to the uncertainty?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Not much uncertainty
• The uncertain precision of human triggering (uncertainty associated with an actual human finger on a computer mouse)
To what extent to you think this factor would contribute to the uncertainty?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Some uncertainty.
• Actual differences in the time required for the object to travel the same distance.
To what extent to you think this factor would contribute to the uncertainty?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Once you have the beginning and end set up, the uncertainty should be very little.
• Differences in positioning the object prior to release.
To what extent to you think this factor would contribute to the uncertainty?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Great uncertainty
• Human uncertainty in observing exactly when the object reached the end of the incline.
To what extent to you think this factor would contribute to the uncertainty?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Great uncertainty
*********************************************
Question: What, if anything, could you do about the uncertainty due to each of the following? Address each specifically.
• The lack of precision of the TIMER program.
What do you think you could do about the uncertainty due to this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Clear the Timer several times before beginning a new sample.
• The uncertain precision of human triggering (uncertainty associated with an actual human finger on a computer mouse)
What do you think you could do about the uncertainty due to this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv be more in tune to the begin and end click
• Actual differences in the time required for the object to travel the same distance.
What do you think you could do about the uncertainty due to this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Set the ramp up first to make sure the experiment goes as planned.
• Differences in positioning the object prior to release.
What do you think you could do about the uncertainty due to this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Mark the starting line so to position the object correctly.
• Human uncertainty in observing exactly when the object reached the end of the incline.
What do you think you could do about the uncertainty due to this factor?
your answer: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Mark the end of the incline to make it more visible. Maybe place foam at the end as a buffer for deflecting the bounce.
*********************************************
Question: If, as in the object-down-an-incline experiment, you know the distance an object rolls down an incline and the time required, explain how you will use this information to find the object 's average speed on the incline.
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
R * T = Distance or Rate = Distance / Time
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Confident
*********************************************
Question: If an object travels 40 centimeters down an incline in 5 seconds then what is its average velocity on the incline? Explain how your answer is connected to your experience.
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
40 cm = 5sec * Velocity
40cm/5sec= velocity
8 cm/sec = velocity
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Confident
*********************************************
Question: If the same object requires 3 second to reach the halfway point, what is its average velocity on the first half of the incline and what is its average velocity on the second half?
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
20/3= V first half
6 2/3 cm/sec = V first half
40 cm = (3 * 6 2/3 cm/sec) + (2 sec * V)
20 = 2V
10 cm/sec = Vel of second half
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I tried
*********************************************
Question: `qAccording to the results of your introductory pendulum experiment, do you think doubling the length of the pendulum will result in half the frequency (frequency can be thought of as the number of cycles per minute), more than half or less than half?
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
Doubling the length of the pendulum will result in less than half the frequency.
Length 24cm freq 63
Length 48 cm freq 44
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Confident
*********************************************
Question: `qNote that for a graph of y vs. x, a point on the x axis has y coordinate zero and a point on the y axis has x coordinate zero. In your own words explain why this is so.
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
When a point on the x axis has a y coordinate zero, this is called the y-intercept. Y is not changing while x is changing.
When a point on the y-axis has x coordinate zero, this is called the x-intercept. X is not changing while y is changing.
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Some
*********************************************
Question: `qOn a graph of frequency vs. pendulum length (where frequency is on the vertical axis and length on the horizontal), what would it mean for the graph to intersect the vertical axis (i.e., what would it mean, in terms of the pendulum and its behavior, if the line or curve representing frequency vs. length goes through the vertical axis)? What would this tell you about the length and frequency of the pendulum?
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
If the graph intersected the vertical axis for the frequency vs. length. It would mean frequency became 0 at some point of this length. It stopped swinging.
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Some
*********************************************
Question: `qOn a graph of frequency vs. pendulum length, what would it mean for the graph to intersect the horizontal axis (i.e., what would it mean, in terms of the pendulum and its behavior, if the line or curve representing frequency vs. length goes through the horizontal axis)? What would this tell you about the length and frequency of the pendulum?
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
If the graph intersected the horizontal axis for the frequency vs. pendulum length, it would mean that the length of the pendulum was so long that it couldn’t swing any more. There wasn’t enough space for the pendulum to oscillate for a full period.
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Some
*********************************************
Question: `qIf a ball rolls down between two points with an average velocity of 6 cm / sec, and if it takes 5 sec between the points, then how far apart are the points?
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
V=6cm/sec T=5 sec D=?
V * T = D
6cm/sec * 5 sec = 30 cm
Confidence Assessment:
Confident
.............................................
Given Solution:
`aOn the average the ball moves 6 centimeters every second, so in 5 seconds it will move 30 cm.
The formal calculation goes like this:
• We know that vAve = `ds / `dt, where vAve is ave velocity, `ds is displacement and `dt is the time interval.
• It follows by algebraic rearrangement that `ds = vAve * `dt.
• We are told that vAve = 6 cm / sec and `dt = 5 sec. It therefore follows that
• `ds = 6 cm / sec * 5 sec = 30 (cm / sec) * sec = 30 cm.
The details of the algebraic rearrangement are as follows:
• vAve = `ds / `dt. We multiply both sides of the equation by `dt:
• vAve * `dt = `ds / `dt * `dt. We simplify to obtain
• vAve * `dt = `ds, which we then write as{}`ds = vAve *`dt
Be sure to address anything you do not fully understand in your self-critique.
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
That would be algebraically correct
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ok
*********************************************
Question: `qYou were asked to read the text and some of the problems at the end of the section. Tell your instructor about something in the text you understood up to a point but didn't understand fully. Explain what you did understand, and ask the best question you can about what you didn't understand.
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
I understand Models, theories, laws, principles, Scientific Notation, most of the units and standards. Converting units to other units I’m ok if I can remember them.
Areas that I’m still shaky are the percent uncertainty,
Confidence Assessment:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
*********************************************
Question: `qTell your instructor about something in the problems you understand up to a point but don't fully understand. Explain what you did understand, and ask the best question you can about what you didn't understand.
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
Your solution:
6. What is the percent uncertainty in the mearsurement 3.76 +/- 0.25m?
.25/3.76 * 100% = 6.64893 = 7%
3.51 or 4.01
11 What, roughly, is the percent uncertainty in the volume of a spherical beach ball whose radius is r=2.86 +/- 0.09m?
.09/98 *100 =.09%
Formula for volume of a sphere= 4/3 * 3.1415(2.86)(2.86)(2.86)=98
SOME COMMON QUESTIONS:
*********************************************
QUESTION: I didn’t understand how to calculate uncertainty for a number such as 1.34. When given examples we had problems such as 1.34 ±0.5 and with that we had a formula (0.5/1.34)*100. So I do not understand how to compute uncertainty when no estimated uncertainty is given.
INSTRUCTOR RESPONSE:
The +- number is the uncertainty in the measurement.
The percent uncertainty is the uncertainty, expressed as a percent of the number being observed.
So the question in this case is simply, 'what percent of 1.34 is 0.5?'.
• 0.5 / 1.34 = .037, approximately. So 0.5 is .037 of 1.34.
• .037 is the same as 3.7%.
I recommend understanding the principles of ratio, proportion and percent as opposed to using a formula. These principles are part of the standard school curriculum, though it does not appear that these concepts have been well mastered by the majority of students who have completed the curriculum. However most students who have the prerequisites for this course do fine with these ideas, after a little review. It will in the long run save you time to do so.
There are numerous Web resources available for understanding these concepts. You should check out these resources and let me know if you have questions.
Please feel free to include additional comments or questions:
"
&#This looks good. Let me know if you have any questions. &#