course Phy 201 Question: `q001 Note that there are 10 questions in this assignment.
.............................................
Given Solution: The rate of change of the speed with respect clock time is equal to the change in the speed divided by the change in the clock time. So we must ask, what is the change in the speed, what is the change in the clock time and what therefore is the rate at which the speed is changing with respect to clock time? The change in speed from 5 meters/second to 25 meters/second is 20 meters/second. This occurs in a time interval lasting 4 seconds. The average rate of change of the speed is therefore (20 meters/second)/(4 seconds) = 5 meters / second / second. This means that on the average, per second, the speed changes by 5 meters/second. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q002. Explain in commonsense terms of the significance for an automobile of the rate at which its velocity changes. Do you think that a car with a more powerful engine would be capable of a greater rate of velocity change? ********************************************* Your solution: The rate at which velocity changes determines how quickly the car can increase speeds in a given amount of time. A car with a more powerful engine would most likely have a greater rate of velocity change than a car with a weak engine. Confidence Assessment: 3
.............................................
Given Solution: A car whose velocity changes more rapidly will attain a given speed in a shorter time, and will be able to 'pull away from' a car which is capable of only a lesser rate of change in velocity. A more powerful engine, all other factors (e.g., weight and gearing) being equal, would be capable of a greater change in velocity in a given time interval. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q003. Explain how we obtain the units meters / second / second in our calculation of the rate of change of the car's speed. ********************************************* Your solution: Rate of change of car’s speed is found by taking the change in velocity (which is given with the units m/sec) over the change in time (in this case given in seconds). Putting (m/sec) over sec would give us meters/second/second and the rate that velocity changed each second. Confidence Assessment: 3
.............................................
Given Solution: When we divide the change in velocity, expressed in meters/second, by the duration of the time interval in seconds, we get units of (meters / second) / second, often written meters / second / second. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q004. The unit (meters / second) / second is actually a complex fraction, having a numerator which is itself a fraction. Such a fraction can be simplified by multiplying the numerator by the reciprocal of the denominator. We thus get (meters / second) * (1/ second). What do we get when we multiply these two fractions? ********************************************* Your solution: Multiplying (meters/sec)* (1/sec) gives the units meters/sec^2. Confidence Assessment: 3
.............................................
Given Solution: Multiplying the numerators we get meters * 1; multiplying the denominators we get second * second, which is second^2. Our result is therefore meters * 1 / second^2, or just meters / second^2. If appropriate you may at this point comment on your understanding of the units of the rate of change of velocity. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): I understand the units for rate of change of velocity and how to work with them. Self-critique rating: 3 ********************************************* Question: `q004. If the velocity of an object changes from 10 m/s to -5 m/s during a time interval of 5 seconds, then at what average rate is the velocity changing? ********************************************* Your solution: you find the rate of velocity change by subtracting the initial velocity from the final velocity. This is (-5m/s-10m/s) which gives the negative number -15m/sec. You then divide this by the time interval leaving -5m/sec^2. This means that the object is slowing down by 5m/sec each second. Confidence Assessment: 3
.............................................
Given Solution: We see that the velocity changes from 10 meters/second to -5 meters/second, a change of -15 meters / second, during a five-second time interval. A change of -15 m/s during a 5 s time interval implies an average rate of -15 m/s / (5 s) = -3 (m/s)/ s = -3 m/s^2. This is the same as (-3 m/s) / s, as we saw above. So the velocity is changing by -3 m/s every second. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q005. You should have noted that velocity can be positive or negative, as can the change in velocity or the rate at which velocity changes. The average rate at which a quantity changes with respect to time over a given time interval is equal to the change in the quantity divided by the duration of the time interval. In this case we are calculating the average rate at which the velocity changes. If v represents velocity then we we use `dv to represent the change in velocity and `dt to represent the duration of the time interval. What expression do we therefore use to express the average rate at which the velocity changes? ********************************************* Your solution: aAve=’dv/’dt. The rate which velocity changes is the change in velocity (‘dv) divided by the change in time (‘dt). aAve represents the rate of change of velocity. Confidence Assessment: 3
.............................................
Given Solution: The average rate would be expressed by [ave rate of velocity change with respect to clock time] = `dv / `dt. The expression [ave rate of velocity change with respect to clock time] is pretty cumbersome so we give it a name. The name we give it is 'average acceleration', abbreviated by the letter aAve. Using a to represent acceleration, write down the definition of average acceleration. The definition of average acceleration is aAve = `dv / `dt. Please make any comments you feel appropriate about your understanding of the process so far. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): I understand the process of finding rate of change of velocity or the average acceleration. Self-critique rating: 3 ********************************************* Question: `q006. If a runner is moving at 6 meters / sec at clock time t = 1.5 sec after starting a race, and at 9 meters / sec at clock time t = 3.5 sec after starting, then what is the average acceleration of the runner between these two clock times? Before answering, click for the next question aAve=’dv/’dt aAve= 3m/sec/2sec aAve=1.5m/sec/sec Is the average acceleration of the runner &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q006a. What is the change `dv in the velocity of the runner during the time interval, and what is the change `dt in clock time during this interval? Before answering, click for the next question ‘dv= 9m/sec-6m/sec=3m/sec ‘dt= 3.5sec-1.5 sec=2 sec &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: ********************************************* Question: `q006b. What therefore is the average rate at which the velocity is changing during this time interval? ********************************************* Your solution: aAve=’dv/’dt aAve= (3m/sec)/2sec aAve=1.5m/sec/sec is the average rate at which the velocity of the runner is changing. Confidence Assessment: 2
.............................................
Given Solution: We see that the runner's velocity changes from 6 meters/second to 9 meters/second, a change of `dv = 9 m/s - 6 m/s = 3 m/s, during a time interval their runs from t = 1.5 sec to t = 3.5 sec so that the duration of the interval is `dt = 3.5 s - 1.5 s = 2.0 s. The rate at which the velocity changes is therefore 3 m/s / (2.0 s) = 1.5 m/s^2. Please comment if you wish on your understanding of the problem at this point. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q007. On a graph of velocity vs. clock time, we can represent the two events of this problem by two points on the graph. The first point will be (1.5 sec, 6 meters/second) and the second point will be (3.5 sec, 9 meters / sec). What is the run between these points and what does it represent? What is the rise between these points what does it represent? What is the slope between these points what does it represent? ********************************************* Your solution: Rise=change in velocity 9 m/s-6m/s=3m/s The rise is 3m/s Run= change in clock time 3.5s-1.5s=2 sec. 2 seconds is the run. The slope of these points is rise/run or 1.5meters/sec/sec. This represents the average acceleration of the object. Confidence Assessment: 3
.............................................
Given Solution: The rise from the first point to the second is from 6 meters/second to 9 meters/second, or 3 m/s. This represents the change `dv in velocity. The run is from 1.5 seconds to 3.5 seconds, or 2 seconds, and represents the change `dt in clock time. The slope, being the rise divided by the run, is 3 m/s / (2 sec) = 1.5 m/s^2. This slope represents `dv / `dt, which is the average acceleration during the time interval. You may if you wish comment on your understanding to this point. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q008. In what sense does the slope of any graph of velocity vs. clock time represent the acceleration of the object? For example, why does a greater slope imply greater acceleration? ********************************************* Your solution: Slope is equal to ride over run or change in velocity/change in clock time. The slope of a graph represents the acceleration of the object because it shows how much the velocity of the object increases per second. If the rise is high, this means the slope will be high and the object is covering more distance in a smaller period of time. If the rise is small, the graph will have a small slope and the object will be covering less distance in a given amount of time. Confidence Assessment: 3
.............................................
Given Solution: Since the rise between two points on a graph of velocity vs. clock time represents the change in `dv velocity, and since the run represents the change `dt clock time, the slope represents rise / run, or change in velocity /change in clock time, or `dv / `dt. This is the definition of average acceleration. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q009. This is the same situation as in the preceding problem: An automobile coasts down a hill with a constant slope. At first its velocity increases at a very nearly constant rate. After it attains a certain velocity, air resistance becomes significant and the rate at which velocity changes decreases, though the velocity continues to increase. Describe a graph of velocity vs. clock time for this automobile (e.g., neither increasing nor decreasing; increasing at an increasing rate, a constant rate, a decreasing rate; decreasing at an increasing, constant or decreasing rate; the description could be different for different parts of the graph). ********************************************* Your solution: In this graph the velocity of the car will increase at a decreasing rate. This means that over time the slope of the graph will decrease. Velocity would be on the y axis and clock time would be on the x axis. The slope would be positive and constant at first but would decrease over time. Confidence Assessment: OK
.............................................
Given Solution: Your graph should have velocity as the vertical axis and clock time as the horizontal axis. The graph should be increasing since the velocity starts at zero and increases. At first the graph should be increasing at a constant rate, because the velocity is increasing at a constant rate. The graph should continue increasing by after a time it should begin increasing at a decreasing rate, since the rate at which the velocity changes begins decreasing due to air resistance. However the graph should never decrease, although as air resistance gets greater and greater the graph might come closer and closer to leveling off. Critique your solution by describing or insights you had or insights you had and by explaining how you now know how to avoid those errors. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK Self-critique rating: OK ********************************************* Question: `q010. An automobile coasts down a hill with a constant slope. At first its velocity increases at a very nearly constant rate. After it attains a certain velocity, air resistance becomes significant and the rate at which velocity changes decreases, though the velocity continues to increase. Describe a graph of acceleration vs. clock time for this automobile (e.g., neither increasing nor decreasing; increasing at an increasing rate, a constant rate, a decreasing rate; decreasing at an increasing, constant or decreasing rate; the description could be different for different parts of the graph). ********************************************* Your solution: An acceleration vs clock time graph would be concave down. It would start off at a constant upward slope, but would then begin to slow down. The graph would have a maximum point. The slope would increase to this max point and then decrease after it and become negative. Acceleration would be on the y axis and time would be on the x axis. Confidence Assessment: 3
.............................................
Given Solution: Your graph should have acceleration as the vertical axis and clock time as the horizontal axis. At first the graph should be neither increasing nor decreasing, since it first the acceleration is constant. Then after a time the graph should begin decreasing, which indicates the decreasing rate at which velocity changes as air resistance begins having an effect. An accurate description of whether the graph decreases at a constant, increasing or decreasing rate is not required at this point, because the reasoning is somewhat complex and requires knowledge you are not expected to possess at this point. However it is noted that the graph will at first decrease more and more rapidly, and then less and less rapidly as it approaches the t axis. STUDENT QUESTION: Can you clarify some more the differences in acceleration and velocity? INSTRUCTOR RESPONSE: ** Velocity is the rate at which position changes and the standard units are cm/sec or m/sec. Acceleration is the rate at which velocity changes and its standard units are cm/s^2 or m/s^2. Velocity is the slope of a position vs. clock time graph. Acceleration is the slope of a velocity vs. clock time graph. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): I stated that the graph would increase first but this doesn’t make sense if acceleration is initially constant, it would be a straight line. The rest of my answer is correct. Self-critique rating: 3