Asst 18 QA

course Phy 201

vRfy󌭽Sassignment #018

Your work has been received. Please scroll through the document to see any inserted notes (inserted at the appropriate place in the document, in boldface) and a note at the end. The note at the end of the file will confirm that the file has been reviewed; be sure to read that note. If there is no note at the end, notify the instructor through the Submit Work form, and include the date of the posting to your access page.

018. Vectors

Physics II

03-16-2007

......!!!!!!!!...................................

18:59:46

`q001. Note that this assignment contains 7 questions.

. The Pythagorean Theorem: the hypotenuse of a right triangle has a length c such that c^2 = a^2 + b^2, where a and b are the lengths of the legs of the triangle. Sketch a right triangle on a set of coordinate axes by first locating the point (7, 13). Then sketch a straight line from the origin of the coordinate system to this point to form the hypotenuse of the triangle. Continue by sketching a line straight down from (7, 13) to the x axis to form one leg of the triangle, then form the other leg by continuing straight along the x axis back to the origin. How long are these two legs? How long therefore is the hypotenuse?

......!!!!!!!!...................................

RESPONSE -->

vertical leg: 13

horizontal leg: 7

hypotenuse: a^2 + b^2 = c^2

c^2 = 13^2 + 7^2 = 218

c^2 = sqrt 218 = 14.8

confidence assessment: 2

.................................................

......!!!!!!!!...................................

18:59:54

The leg from (7, 13) to the x axis drops from the point (7, 13) to the point (7,0) and so has length 13. The second leg runs from (7,0) to the origin, a distance of 7 units.

The legs therefore have lengths a = 13 and b = 7, so that the hypotenuse c satisfies c^2 = a^2 + b^2 and we have

c = `sqrt(a^2 + b^2) = `sqrt( 13^2 + 7^2 ) = `sqrt( 216) = 14.7, approximately.

......!!!!!!!!...................................

RESPONSE -->

ok

self critique assessment: 3

.................................................

......!!!!!!!!...................................

19:03:00

`q002. Sketch a right triangle on a set of coordinate axes whose leg along the x axis has length 12 and whose hypotenuse has length 15. What must be the length of the second leg of the triangle?

......!!!!!!!!...................................

RESPONSE -->

a^2 + b^2 = c^2

12^2 + b^2 = 15^2

b^2 =15^2 - 12^2 = 81

b^2 = sqrt 81 = 9

confidence assessment: 2

.................................................

......!!!!!!!!...................................

19:03:05

Let c stand for the length of the hypotenuse and a for the length of the known side, with b standing for the length of the unknown side. Then since c^2 = a^2 + b^2, b^2 = c^2 - a^2 and

b = `sqrt(c^2 - a^2) = `sqrt( 15^2 - 12^2) = `sqrt(225 - 144) = `sqrt(81) = 9.

......!!!!!!!!...................................

RESPONSE -->

ok

self critique assessment: 3

.................................................

......!!!!!!!!...................................

19:08:30

`q003. If a line of length L is directed from the origin of an x-y coordinate system at an angle `theta with the positive x axis, then the x and y coordinates of the point where the line ends will be y = L * sin(`theta) and x = L * cos(`theta).

Sketch a line of length 10, directed from the origin at an angle of 37 degrees with the positive x axis. Without doing any calculations estimate the x and y coordinates of this point. Give your results and explain how you obtained your estimates.

......!!!!!!!!...................................

RESPONSE -->

horizontal leg: 11

vertical leg: 5

I drew a 10 mm line at an approximate 37 degree angle and then measured in millimeters the y distance and x distance.

confidence assessment: 2

.................................................

......!!!!!!!!...................................

19:09:01

The line will run closer to the x axis then to the y axis, since the line is directed at an angle below 45 degrees. It won't run a whole lot closer but it will run significantly closer, which will make the x coordinate greater than the y coordinate. Since the line itself has length 10, it will run less than 10 units along either the x or the y axis. It turns out that the x coordinate is very close to 8 and the y coordinate is very close to 6. Your estimates should have been reasonably close to these values.

......!!!!!!!!...................................

RESPONSE -->

how reasonable is reasonable?

self critique assessment: 3

If your axes are at right angles, then the x coordinate could not be greater than the length of the segment. Better check your figure and your measurements if you got a horizontal leg of 11 for a segment of length 10. The vertical leg you report is only off by 1 mm and is reasonable.

.................................................

......!!!!!!!!...................................

19:26:56

`q004. Using your calculator you can calculate sin(37 deg) and cos(37 deg). First be sure your calculator is in degree mode (this is the default mode for most calculators so if you don't know what mode your calculator is in, it is probably in degree mode). Then using the sin and cos buttons on your calculator you can find sin(37 deg) and cos(37 deg). What are these values and what should therefore be the x and y coordinates of the line directed from the origin at 37 degrees from the x axis?

......!!!!!!!!...................................

RESPONSE -->

sin 37 = .60

cos 37: .80

x: 8

y: 6

sin = opp/hyp

.60 = opp/10

opp = 6

cos = adj / hyp

adj = .80 * 10

adj = 8

confidence assessment: 2

.................................................

......!!!!!!!!...................................

19:27:34

sin(37 deg) should give you a result very close but not exactly equal to .6.

cos(37 deg) should give you a result very close but not exactly equal to .8.

Since the x coordinate is L cos(`theta), then for L = 10 and `theta = 37 deg we have x coordinate 10 * cos(37 deg) = 10 * .8 = 8 (your result should be slightly different than this approximate value).

Since the y coordinate is L sin(`theta), then for L = 10 and `theta = 37 deg we have y coordinate 10 * sin(37 deg) = 10 * .6 = 6 (your result should be slightly different than this approximate value).

......!!!!!!!!...................................

RESPONSE -->

You should mention that we are supposed to use 10 for the hyp. It took me a while to figure that out.

self critique assessment: 3

The definition here is in terms of the length of the segment and the angle. The term 'hypotenuse' is not required. If the lines are projected as indicated no triangles are necessary.

Of course the triangles are mentioned in the next question.

This order is dictated by the fact that many students have not had any trigonometry; in some cases this is so even though their transcripts indicate that they have.

.................................................

......!!!!!!!!...................................

20:14:48

`q005. Show that the x and y coordinates you obtained in the preceding problem in fact give the legs of a triangle whose hypotenuse is 10.

......!!!!!!!!...................................

RESPONSE -->

a^2 + b^2 = c^2

6^2 + 8^2 = 100

c = sqrt 100 = 10

confidence assessment: 2

.................................................

......!!!!!!!!...................................

20:14:55

If c stands for the hypotenuse of the triangle, then if a = 8 and b = 6 are its legs we have c = `sqrt(a^2 + b^2) = `sqrt(8^2 + 6^2) = `sqrt(100) = 10. The same will hold for the more precise values you obtained in the preceding problem.

......!!!!!!!!...................................

RESPONSE -->

ok

self critique assessment: 3

.................................................

......!!!!!!!!...................................

20:45:38

`q006. A vector drawn on a coordinate system is generally depicted as a line segment of a specified length directed from the origin at a specified angle with the positive x axis. The vector is traditionally drawn with an arrow on the end away from the origin. In the preceding series of problems the line segment has length 10 and was directed at 37 degrees from the positive x axis. That line segment could have been drawn with an arrow on its end, pointing away from the origin.

The components of a vector consist of a vector called the x component drawn from the origin along the x axis from the origin to x coordinate L cos(`theta), and a vector called the y component drawn from the origin along the y axis to y coordinate L sin(`theta).

What are the x and y components of a vector directed at an angle of 120 degrees, as measured counterclockwise from the positive x axis, and having length 30 units?

......!!!!!!!!...................................

RESPONSE -->

y = L sin (theta) = 30 sin(120) = 26

x = L cos (theta) = 30 cos (120) = -15

confidence assessment: 2

.................................................

......!!!!!!!!...................................

20:45:53

The x component of this vector is vector along the x axis, from the origin to x = 30 cos(120 degrees) = -15.

The y component is a vector along the y axis, from the origin to y = 30 sin(120 degrees) = 26, approx..

Note that the x component is to the left and the y component upward. This is appropriate since the 120 degree angle, has measured counterclockwise from the positive x axis, takes the vector into the second quadrant, which directs it to the left and upward.

......!!!!!!!!...................................

RESPONSE -->

ok

self critique assessment: 3

.................................................

......!!!!!!!!...................................

20:53:43

`q007. The angle of a vector as measured counterclockwise from the positive x axis is easily determined if the components of the vector are known. The angle is simply arctan( y component / x component ) provided the x component is positive. If the x component is negative the angle is arctan( y component / x component ) + 180 deg. If the x component is positive and the y component negative, arctan( y component / x component ) will be a negative angle, and in this case we generally add 360 degrees in order to obtain an angle between 0 and 360 degrees.

The arctan, or inverse tangent tan^-1, is usually on a calculator button marked tan^-1.

Find the angle and length of each of the following vectors as measured counterclockwise from the positive x axis:

A vector with x component 8.7 and y component 5.

A vector with x component -2.5 and y component 4.3.

A vector with x component 10 and y component -17.3.

......!!!!!!!!...................................

RESPONSE -->

30.0

120

300

confidence assessment: 2

.................................................

......!!!!!!!!...................................

20:55:45

A vector with x component 8.7 and y component 5 makes an angle of arctan (5/8.7) = 30 degrees with the x axis. Since the x component is positive, this angle need not be modified. The length of this vector is found by the Pythagorean Theorem to be length = `sqrt(8.7^2 + 5^2) = 10.

A vector with x component -2.5 and y component 4.3 makes an angle of arctan (4.3 / -2.5) + 180 deg = -60 deg + 180 deg = 120 degrees with the x axis. Since the x component is negative, we had to add the 180 degrees. The length of this vector is found by the Pythagorean Theorem to be length = `sqrt((-2.5)^2 + 4.3^2) = 5.

A vector with x component 10 and y component -17.3 makes an angle of arctan (-17.3 / 10) = -60 degrees with the x axis. Since the angle is negative, we add 360 deg to get 300 deg. The length of this vector is found by the Pythagorean Theorem to be length = `sqrt(10^2 + (-17.3)^2) = 20.

......!!!!!!!!...................................

RESPONSE -->

I didn't realize we were supposed to find length as well. But that is very easy to find using the pythagorean theorem.

self critique assessment: 3

.................................................

"

You're in good shape here. See my notes and let me know if you have questions.