course Phy 121 ???€????????assignment #002
......!!!!!!!!...................................
11:09:05 NOTE PRELIMINARY TO QUERY:
......!!!!!!!!...................................
RESPONSE --> I'm not entirely sure what ""NOTE PRELIMINARY TO QUERY"" means, but I'm going to go on a proceed with the assignment.
.................................................
......!!!!!!!!...................................
11:09:52 ** Questions about velocity, average velocity, acceleration, etc. are very confusing because so many of the concepts have similar definitions. People have trouble distinguishing things like average velocity, which for uniform acceleration can be obtained in a process that adds two velocities, from average acceleration, which involves subtracting two velocities; one of these processes involves dividing by 2 and the other dividing by the time interval `dt.
......!!!!!!!!...................................
RESPONSE --> Okay, I read the passage and I understand it.
.................................................
......!!!!!!!!...................................
11:10:45 It is essential to keep the definitions and the meanings of the terms very clear and to work everything from definitions. It is equally important to have a good common-sense understanding of every definition so you can develop the intuition to make sense of everything you do.
......!!!!!!!!...................................
RESPONSE --> Be precise and specific about these definitions so as not to confuse them.
.................................................
......!!!!!!!!...................................
11:11:02 That inevitably takes people a little time. But in the process you develop the habits you will need to succeed in the course. **
......!!!!!!!!...................................
RESPONSE --> Okay.
.................................................
......!!!!!!!!...................................
11:13:11 How is acceleration an example of a rate of change?
......!!!!!!!!...................................
RESPONSE --> Rate of change is generally defined as the amount of change over a specific period of time. Acceleration is defined as the change in velocity divided by the time taken to make this change. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:13:54 ** Velocity is the rate of change of position. Acceleration is rate of change of velocity--change in velocity divided by the time period. To find the acceleration from a v vs. t graph you take the rise, which represents the change in the average velocity, and divide by the run, which represents the change in time. The average rate of change of velocity with respect to clock time is the same as the acceleration **
......!!!!!!!!...................................
RESPONSE --> My answer is mostly correct. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:18:22 If you know average acceleration and time interval what can you find?
......!!!!!!!!...................................
RESPONSE --> Here I'm going to make an educated guess of velocity. Acceleration is defined as a change in velocity. So I say velocity because perhaps initial and final velocity can be determined since we know the time interval. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:19:52 ** Accel = change in vel / change in clock time, so if you know accel and time interval (i.e., change in clock time) you can find change in vel = accel * change in clock time. In this case you don't know anything about how fast the object is traveling. You can only find the change in its velocity. COMMON ERROR (and response): Average acceleration is the average velocity divided by the time (for the change in the average velocity)so you would be able to find the average velocity by multiplying the average acceleration by the change in time. INSTRUCTOR RESPONSE: Acceleration is rate of change of velocity--change in velocity divided by the change in clock time. It is not average velocity / change in clock time. COUNTEREXAMPLE TO COMMON ERROR: Moving at a constant 60 mph for 3 hours, there is no change in velocity so acceleration = rate of change of velocity is zero. However average velocity / change in clock time = 60 mph / (3 hr) = 20 mile / hr^2, which is not zero. This shows that acceleration is not ave vel / change in clock time. COMMON ERROR and response: You can find displacement INSTRUCTOR RESPONSE: From average velocity and time interval you can find displacement. However from average acceleration and time interval you can find only change in velocity. Acceleration is the rate at which velocity changes so average acceleration is change in velocity/change in clock time. From this it follows that change in velocity = acceleration*change in clock time. **
......!!!!!!!!...................................
RESPONSE --> Okay after reading the solution I understand the way in which I should be thinking. My guess was actually pretty close. self critique assessment: 2
.................................................
......!!!!!!!!...................................
11:20:38 Can you find velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> You can find average velocity from acceleration and time interval as stated in the previous solution. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:21:28 ** Ave accel = change in vel / change in clock time. If acceleration is constant, then this relationship becomes acceleration = change in velocity/change in clock time. Change in clock time is the time interval, so if we know time interval and acceleration we can find change in velocity = acceleration * change in clock time = acceleration * change in clock time. We cannot find velocity, only change in velocity. We would need additional information (e.g., initial velocity, average velocity or final velocity) to find an actual velocity. For example if we know that the velocity of a car is changing at 2 (mi/hr) / sec then we know that in 5 seconds the speed will change by 2 (mi/hr)/s * 5 s = 10 mi/hr. But we don't know how fast the car is going in the first place, so we have no information about its actual velocity. If this car had originally been going 20 mi/hr, it would have ended up at 30 miles/hr. If it had originally been going 70 mi/hr, it would have ended up at 80 miles/hr. Similarly if an object is accelerating at 30 m/s^2 (i.e., 30 (m/s) / s) for eight seconds, its velocity will change by 30 meters/second^2 * 8 seconds = 240 m/s. Again we don't know what the actual velocity will be because we don't know what velocity the object was originally moving. ANOTHER SOLUTION: The answer is 'No'. You can divide `ds (change in position) by `dt (change in clock time) to get vAve = `ds / `dt. Or you can divide `dv (change in vel) by `dt to get aAve. So from aAve and `dt you can get `dv, the change in v. But you can't get v itself. EXAMPLE: You can find the change in a quantity from a rate and a time interval, but you can't find the actual value of the quantity. For example, accelerating for 2 sec at 3 mph / sec, your velocity changes by 6 mph, but that's all you know. You don't know how fast you were going in the first place. Could be from 5 mph to 12 mph, or 200 mph to 206 mph (hopefully not down the Interstate). COMMON ERROR: Yes. Final velocity is average velocity multiplied by 2. INSTRUCTOR RESPONSE: We aren't given ave velocity and time interval, we're give ave accel and time interval, so this answer is not valid. Note also that final velocity is average velocity multiplied by 2 ONLY when init vel is zero. Be sure you always state it this way. ANOTHER EXAMPLE: You can't find velocity from ave accel and time interval--you can only find change in velocity from this information. For example a velocity change of 10 mph would result from ave accel 2 m/s^2 for 2 seconds; this change could be between 10 and 20 mph or between 180 and 190 mph, and if all we know is ave accel and time interval we couldn't tell the difference. ONE MORE RESPONSE: You can find the change in velocity. The actual velocity cannot be found from ave accel and time interval. For example you would get the same result for acceleration if a car went from 10 mph to 20 mph in 5 sec as you would if it went from 200 mph to 220 mph in 10 sec. **
......!!!!!!!!...................................
RESPONSE --> My answer was at least partially correct. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:23:59 Can you find change in velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> Yes. Acceleration is defined as the following: Average acceleration = change of velocity / time
.................................................
......!!!!!!!!...................................
11:24:27 **Good student response: Yes, the answer that I provided previously is wrong, I didn't consider the 'change in velocity' I only considered the velocity as being the same as the change in velocity and that was not correct. Change in velocity is average accel * `dt. CALCULUS-RELATED ANSWER WITH INSTRUCTOR NOTE(relevant mostly to University Physics students) Yes, you take the integral with respect to time INSTRUCTOR NOTE: That's essentially what you're doing if you multiply average acceleration by time interval. In calculus terms the reason you can't get actual velocity from acceleration information alone is that when you integrate acceleration you get an arbitrary integration constant. You don't have any information in those questions to evaluate c. **
......!!!!!!!!...................................
RESPONSE --> I think I got the correct answer. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:27:01 Can you find average velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> Average velocity is change in displacement over time. Average acceleration is change of velocity over time elapsed. In this particular case, based on what we know according to these definitions, we will need more information to find average velocity. (initial and final velocities or displacement) confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:27:46 ** CORRECT STATEMENT BUT NOT AN ANSWER TO THIS QUESTION: The average acceleration would be multiplied by the time interval to find the change in the velocity INSTRUCTOR RESPONSE: Your statement is correct, but as you say you can find change in vel, which is not the same thing as ave vel. You cannot find ave vel. from just accel and time interval. There is for example nothing in accel and time interval that tells you how fast the object was going initially. The same acceleration and time interval could apply as well to an object starting from rest as to an object starting at 100 m/s; the average velocity would not be the same in both cases. So accel and time interval cannot determine average velocity. CALCULUS-RELATED ERRONEOUS ANSWER AND INSTRUCTOR CLAIRIFICATION(relevant mostly to University Physics students: Yes, you take the integral and the limits of integration at the time intervals CLARIFICATION BY INSTRUCTOR: A definite integral of acceleration with respect to t gives you only the change in v, not v itself. You need an initial condition to evaluate the integration constant in the indefinite integral. To find the average velocity you would have to integrate velocity (definite integral over the time interval) and divide by the time interval. **
......!!!!!!!!...................................
RESPONSE --> I think my answer is at least partially correct. self critique assessment: 3
average acceleration is an average rate of change of velocity with respect to clock time.
The example below defines the term 'average rate', connects the definition to the slope of a graph, and applies that definition to a situation involving temperature and clock time. &#
ave rate = (change in A) / (change in B).
From this it follows that
change in A = ave rate * change in B
and also that
change in B = change in A / ave rate
where 'ave rate' here is an abbreviation for the specific term 'average rate of change of A with respect to B.
On a graph of A vs. B, the quantity A is represented relative to the vertical axis and the quantity B relative to the horizontal. Between two graph points, therefore, the change in A is the 'rise' from one point to the other, and the change in B is the 'run' from the same first point to the second. The average rate of change of A with respect to B is then
ave rate = (change in A) / (change in B) = rise / run.
Since rise / run between two points is the slope of the straight line segment between those points, we can identify an average rate of change of A with respect to B as the slope between two points on the graph of A vs. B.
Since slope = rise / run, we see that
rise = slope * run and
run = rise / slope
Interpreting slope as ave rate, rise as change in A and run as change in B, this again tells us that change in A = ave rate * change in B, and change in B = change in A / ave rate. &#
.................................................
......!!!!!!!!...................................
11:30:07 You can find only change in velocity from average acceleration and time interval. To find actual velocity you have to know at what velocity you started. Why can't you find average velocity from acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> You don't have enough information to find average velocity from acceleration and time interval. To find average velocity you must have initial and final velocities or the change in position. Acceleration doesn't tell us any of the previously mentioned information, only the change in the velocity. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:30:27 ** Average velocity is change in position/change in clock time. Average velocity has no direct relationship with acceleration. CALCULUS-RELATED ANSWER you dont know the inital velocity or the final velocity INSTRUCTOR COMMENT: . . . i.e., you can't evaluate the integration constant. **
......!!!!!!!!...................................
RESPONSE --> I got the correct answer. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:31:11 General College Physics only: Problem #10 Summarize your solution Problem 1.10 (approx. uncertainty in area of circle given radius 2.8 * 10^4 cm).
......!!!!!!!!...................................
RESPONSE --> I am in the Principles of Physics class so I do not think I am required to do this problem, but if you need it from me let me know and I will send it. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:31:24 ** Radius 2.8 * 10^4 cm means that the radius is between 2.75 * 10^4 cm and 2.85 * 10^4 cm. This means that the area is between pi * (2.75 * 10^4 cm)^2 = 2.376 * 10^9 cm^2 and pi * (2.85 * 10^4 cm)^2 = 2.552 * 10^9 cm^2. The difference is .176 * 10^9 cm^2 = 1.76 * 10^8 cm^2, which is the uncertainty in the area. Note that the .1 * 10^4 cm uncertainty in radius is about 4% of the radius, which the .176 * 10^9 cm uncertainty in area is about 8% of the area. This is because the area is proportional to the squared radius. A small percent uncertainty in the radius gives very nearly double the percent uncertainty in the squared radius. **
......!!!!!!!!...................................
RESPONSE --> Not applicable. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:32:43 Query Add comments on any surprises or insights you experienced as a result of this assignment.
......!!!!!!!!...................................
RESPONSE --> I didn't realize how confusing all of this could be. You must be really specific in order to keep everything straight. I really had to concentrate on the definitions because there were times I thought I knew what I was doing when I really didn't know what I was doing. confidence assessment: 2
.................................................
......!!!!!!!!...................................
11:33:44 ** COMMON STUDENT COMMENT AND INSTRUCTOR RESPONSE: I am really confused about velocity, acceleration changes in velocity and acceleration, etc. I guess I am the type that works with a formula and plugs in a number. I have went back to the class notes and the problem sets to summarize formulas. Any suggestions? RESPONSE: I note that you are expressing most of your answers in the form of formulas. Ability to use formulas and plug in numbers is useful, but it doesn't involve understanding the concepts, and without an understanding of the concepts we tend to plug our numbers into equations that don't apply. So we deal first with concepts. However formulas do come along fairly soon. The concepts of velocity, acceleration, etc. are very fundamental, but they are tricky and they take awhile to master. You are doing OK at this point. You'll see plenty more over the next few assignments. If you look at the Linked Outline (on the main Physics 1 page--the one where you click on the Assts button--click on the Overviews button, then on the Linked Outline. You will see a table with a bunch of formulas and links to explanations. You might find this page very useful. Also the Introductory Problem Sets give you formulas in the Generalized Solutions. **
......!!!!!!!!...................................
RESPONSE --> I completely agree with this solution, and I will follow the hints provided by the instructor. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:45:54 Principles of Physics Students and General College Physics Students: Problem 14. What is your own height in meters and what is your own mass in kg, and how did you determine these?
......!!!!!!!!...................................
RESPONSE --> Concerning height in meters: There are 12 inches in 1 foot. I am 5 feet and 5 inches tall. Because there are 12 inches in 1 foot 5 times 12 plus 5 tells us that I am 65 inches tall. 65 in. * (1 m / 39.37 in.) = 1.65 m Concerning mass in kilograms: There are approximately 454 grams in 1 pound. 200 lbs * (454 g / 1 lb) * (1 kg / 10^3 g) = 90.8 kg confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:46:27 Presumably you know your height in feet and inches, and your weight in pounds. Presumably also, you can convert your height in feet and inches to inches. To get your height in meters, you would first convert your height in inches to cm, using the fact that 1 inch = 2.54 cm. Dividing both sides of 1 in = 2.54 cm by either 1 in or 2.54 cm tells us that 1 = 1 in / 2.54 cm or that 1 = 2.54 cm / 1 in, so any quantity can be multiplied by 1 in / (2.54 cm) or by 2.54 cm / (1 in) without changing its value. Thus if you multiply your height in inches by 2.54 cm / (1 in), you will get your height in cm. For example if your height is 69 in, your height in cm will be 69 in * 2.54 cm / (1 in) = 175 in * cm / in. in * cm / in = (in / in) * cm = 1 * cm = cm, so our calculation comes out 175 cm.
......!!!!!!!!...................................
RESPONSE --> I think I got the correct answer. self critique assessment: 3
.................................................
"
course Phy 121 ???€????????assignment #002
......!!!!!!!!...................................
11:09:05 NOTE PRELIMINARY TO QUERY:
......!!!!!!!!...................................
RESPONSE --> I'm not entirely sure what ""NOTE PRELIMINARY TO QUERY"" means, but I'm going to go on a proceed with the assignment.
.................................................
......!!!!!!!!...................................
11:09:52 ** Questions about velocity, average velocity, acceleration, etc. are very confusing because so many of the concepts have similar definitions. People have trouble distinguishing things like average velocity, which for uniform acceleration can be obtained in a process that adds two velocities, from average acceleration, which involves subtracting two velocities; one of these processes involves dividing by 2 and the other dividing by the time interval `dt.
......!!!!!!!!...................................
RESPONSE --> Okay, I read the passage and I understand it.
.................................................
......!!!!!!!!...................................
11:10:45 It is essential to keep the definitions and the meanings of the terms very clear and to work everything from definitions. It is equally important to have a good common-sense understanding of every definition so you can develop the intuition to make sense of everything you do.
......!!!!!!!!...................................
RESPONSE --> Be precise and specific about these definitions so as not to confuse them.
.................................................
......!!!!!!!!...................................
11:11:02 That inevitably takes people a little time. But in the process you develop the habits you will need to succeed in the course. **
......!!!!!!!!...................................
RESPONSE --> Okay.
.................................................
......!!!!!!!!...................................
11:13:11 How is acceleration an example of a rate of change?
......!!!!!!!!...................................
RESPONSE --> Rate of change is generally defined as the amount of change over a specific period of time. Acceleration is defined as the change in velocity divided by the time taken to make this change. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:13:54 ** Velocity is the rate of change of position. Acceleration is rate of change of velocity--change in velocity divided by the time period. To find the acceleration from a v vs. t graph you take the rise, which represents the change in the average velocity, and divide by the run, which represents the change in time. The average rate of change of velocity with respect to clock time is the same as the acceleration **
......!!!!!!!!...................................
RESPONSE --> My answer is mostly correct. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:18:22 If you know average acceleration and time interval what can you find?
......!!!!!!!!...................................
RESPONSE --> Here I'm going to make an educated guess of velocity. Acceleration is defined as a change in velocity. So I say velocity because perhaps initial and final velocity can be determined since we know the time interval. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:19:52 ** Accel = change in vel / change in clock time, so if you know accel and time interval (i.e., change in clock time) you can find change in vel = accel * change in clock time. In this case you don't know anything about how fast the object is traveling. You can only find the change in its velocity. COMMON ERROR (and response): Average acceleration is the average velocity divided by the time (for the change in the average velocity)so you would be able to find the average velocity by multiplying the average acceleration by the change in time. INSTRUCTOR RESPONSE: Acceleration is rate of change of velocity--change in velocity divided by the change in clock time. It is not average velocity / change in clock time. COUNTEREXAMPLE TO COMMON ERROR: Moving at a constant 60 mph for 3 hours, there is no change in velocity so acceleration = rate of change of velocity is zero. However average velocity / change in clock time = 60 mph / (3 hr) = 20 mile / hr^2, which is not zero. This shows that acceleration is not ave vel / change in clock time. COMMON ERROR and response: You can find displacement INSTRUCTOR RESPONSE: From average velocity and time interval you can find displacement. However from average acceleration and time interval you can find only change in velocity. Acceleration is the rate at which velocity changes so average acceleration is change in velocity/change in clock time. From this it follows that change in velocity = acceleration*change in clock time. **
......!!!!!!!!...................................
RESPONSE --> Okay after reading the solution I understand the way in which I should be thinking. My guess was actually pretty close. self critique assessment: 2
.................................................
......!!!!!!!!...................................
11:20:38 Can you find velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> You can find average velocity from acceleration and time interval as stated in the previous solution. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:21:28 ** Ave accel = change in vel / change in clock time. If acceleration is constant, then this relationship becomes acceleration = change in velocity/change in clock time. Change in clock time is the time interval, so if we know time interval and acceleration we can find change in velocity = acceleration * change in clock time = acceleration * change in clock time. We cannot find velocity, only change in velocity. We would need additional information (e.g., initial velocity, average velocity or final velocity) to find an actual velocity. For example if we know that the velocity of a car is changing at 2 (mi/hr) / sec then we know that in 5 seconds the speed will change by 2 (mi/hr)/s * 5 s = 10 mi/hr. But we don't know how fast the car is going in the first place, so we have no information about its actual velocity. If this car had originally been going 20 mi/hr, it would have ended up at 30 miles/hr. If it had originally been going 70 mi/hr, it would have ended up at 80 miles/hr. Similarly if an object is accelerating at 30 m/s^2 (i.e., 30 (m/s) / s) for eight seconds, its velocity will change by 30 meters/second^2 * 8 seconds = 240 m/s. Again we don't know what the actual velocity will be because we don't know what velocity the object was originally moving. ANOTHER SOLUTION: The answer is 'No'. You can divide `ds (change in position) by `dt (change in clock time) to get vAve = `ds / `dt. Or you can divide `dv (change in vel) by `dt to get aAve. So from aAve and `dt you can get `dv, the change in v. But you can't get v itself. EXAMPLE: You can find the change in a quantity from a rate and a time interval, but you can't find the actual value of the quantity. For example, accelerating for 2 sec at 3 mph / sec, your velocity changes by 6 mph, but that's all you know. You don't know how fast you were going in the first place. Could be from 5 mph to 12 mph, or 200 mph to 206 mph (hopefully not down the Interstate). COMMON ERROR: Yes. Final velocity is average velocity multiplied by 2. INSTRUCTOR RESPONSE: We aren't given ave velocity and time interval, we're give ave accel and time interval, so this answer is not valid. Note also that final velocity is average velocity multiplied by 2 ONLY when init vel is zero. Be sure you always state it this way. ANOTHER EXAMPLE: You can't find velocity from ave accel and time interval--you can only find change in velocity from this information. For example a velocity change of 10 mph would result from ave accel 2 m/s^2 for 2 seconds; this change could be between 10 and 20 mph or between 180 and 190 mph, and if all we know is ave accel and time interval we couldn't tell the difference. ONE MORE RESPONSE: You can find the change in velocity. The actual velocity cannot be found from ave accel and time interval. For example you would get the same result for acceleration if a car went from 10 mph to 20 mph in 5 sec as you would if it went from 200 mph to 220 mph in 10 sec. **
......!!!!!!!!...................................
RESPONSE --> My answer was at least partially correct. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:23:59 Can you find change in velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> Yes. Acceleration is defined as the following: Average acceleration = change of velocity / time Rearrange the equation to solve for the change in velocity. Multiply both sides by time to get time to cancel on the right side. This leaves: time * average acceleration = change of velocity confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:24:27 **Good student response: Yes, the answer that I provided previously is wrong, I didn't consider the 'change in velocity' I only considered the velocity as being the same as the change in velocity and that was not correct. Change in velocity is average accel * `dt. CALCULUS-RELATED ANSWER WITH INSTRUCTOR NOTE(relevant mostly to University Physics students) Yes, you take the integral with respect to time INSTRUCTOR NOTE: That's essentially what you're doing if you multiply average acceleration by time interval. In calculus terms the reason you can't get actual velocity from acceleration information alone is that when you integrate acceleration you get an arbitrary integration constant. You don't have any information in those questions to evaluate c. **
......!!!!!!!!...................................
RESPONSE --> I think I got the correct answer. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:27:01 Can you find average velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> Average velocity is change in displacement over time. Average acceleration is change of velocity over time elapsed. In this particular case, based on what we know according to these definitions, we will need more information to find average velocity. (initial and final velocities or displacement) confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:27:46 ** CORRECT STATEMENT BUT NOT AN ANSWER TO THIS QUESTION: The average acceleration would be multiplied by the time interval to find the change in the velocity INSTRUCTOR RESPONSE: Your statement is correct, but as you say you can find change in vel, which is not the same thing as ave vel. You cannot find ave vel. from just accel and time interval. There is for example nothing in accel and time interval that tells you how fast the object was going initially. The same acceleration and time interval could apply as well to an object starting from rest as to an object starting at 100 m/s; the average velocity would not be the same in both cases. So accel and time interval cannot determine average velocity. CALCULUS-RELATED ERRONEOUS ANSWER AND INSTRUCTOR CLAIRIFICATION(relevant mostly to University Physics students: Yes, you take the integral and the limits of integration at the time intervals CLARIFICATION BY INSTRUCTOR: A definite integral of acceleration with respect to t gives you only the change in v, not v itself. You need an initial condition to evaluate the integration constant in the indefinite integral. To find the average velocity you would have to integrate velocity (definite integral over the time interval) and divide by the time interval. **
......!!!!!!!!...................................
RESPONSE --> I think my answer is at least partially correct. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:30:07 You can find only change in velocity from average acceleration and time interval. To find actual velocity you have to know at what velocity you started. Why can't you find average velocity from acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> You don't have enough information to find average velocity from acceleration and time interval. To find average velocity you must have initial and final velocities or the change in position. Acceleration doesn't tell us any of the previously mentioned information, only the change in the velocity. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:30:27 ** Average velocity is change in position/change in clock time. Average velocity has no direct relationship with acceleration. CALCULUS-RELATED ANSWER you dont know the inital velocity or the final velocity INSTRUCTOR COMMENT: . . . i.e., you can't evaluate the integration constant. **
......!!!!!!!!...................................
RESPONSE --> I got the correct answer. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:31:11 General College Physics only: Problem #10 Summarize your solution Problem 1.10 (approx. uncertainty in area of circle given radius 2.8 * 10^4 cm).
......!!!!!!!!...................................
RESPONSE --> I am in the Principles of Physics class so I do not think I am required to do this problem, but if you need it from me let me know and I will send it. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:31:24 ** Radius 2.8 * 10^4 cm means that the radius is between 2.75 * 10^4 cm and 2.85 * 10^4 cm. This means that the area is between pi * (2.75 * 10^4 cm)^2 = 2.376 * 10^9 cm^2 and pi * (2.85 * 10^4 cm)^2 = 2.552 * 10^9 cm^2. The difference is .176 * 10^9 cm^2 = 1.76 * 10^8 cm^2, which is the uncertainty in the area. Note that the .1 * 10^4 cm uncertainty in radius is about 4% of the radius, which the .176 * 10^9 cm uncertainty in area is about 8% of the area. This is because the area is proportional to the squared radius. A small percent uncertainty in the radius gives very nearly double the percent uncertainty in the squared radius. **
......!!!!!!!!...................................
RESPONSE --> Not applicable. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:32:43 Query Add comments on any surprises or insights you experienced as a result of this assignment.
......!!!!!!!!...................................
RESPONSE --> I didn't realize how confusing all of this could be. You must be really specific in order to keep everything straight. I really had to concentrate on the definitions because there were times I thought I knew what I was doing when I really didn't know what I was doing. confidence assessment: 2
.................................................
......!!!!!!!!...................................
11:33:44 ** COMMON STUDENT COMMENT AND INSTRUCTOR RESPONSE: I am really confused about velocity, acceleration changes in velocity and acceleration, etc. I guess I am the type that works with a formula and plugs in a number. I have went back to the class notes and the problem sets to summarize formulas. Any suggestions? RESPONSE: I note that you are expressing most of your answers in the form of formulas. Ability to use formulas and plug in numbers is useful, but it doesn't involve understanding the concepts, and without an understanding of the concepts we tend to plug our numbers into equations that don't apply. So we deal first with concepts. However formulas do come along fairly soon. The concepts of velocity, acceleration, etc. are very fundamental, but they are tricky and they take awhile to master. You are doing OK at this point. You'll see plenty more over the next few assignments. If you look at the Linked Outline (on the main Physics 1 page--the one where you click on the Assts button--click on the Overviews button, then on the Linked Outline. You will see a table with a bunch of formulas and links to explanations. You might find this page very useful. Also the Introductory Problem Sets give you formulas in the Generalized Solutions. **
......!!!!!!!!...................................
RESPONSE --> I completely agree with this solution, and I will follow the hints provided by the instructor. self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:45:54 Principles of Physics Students and General College Physics Students: Problem 14. What is your own height in meters and what is your own mass in kg, and how did you determine these?
......!!!!!!!!...................................
RESPONSE --> Concerning height in meters: There are 12 inches in 1 foot. I am 5 feet and 5 inches tall. Because there are 12 inches in 1 foot 5 times 12 plus 5 tells us that I am 65 inches tall. 65 in. * (1 m / 39.37 in.) = 1.65 m Concerning mass in kilograms: There are approximately 454 grams in 1 pound. 200 lbs * (454 g / 1 lb) * (1 kg / 10^3 g) = 90.8 kg confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:46:27 Presumably you know your height in feet and inches, and your weight in pounds. Presumably also, you can convert your height in feet and inches to inches. To get your height in meters, you would first convert your height in inches to cm, using the fact that 1 inch = 2.54 cm. Dividing both sides of 1 in = 2.54 cm by either 1 in or 2.54 cm tells us that 1 = 1 in / 2.54 cm or that 1 = 2.54 cm / 1 in, so any quantity can be multiplied by 1 in / (2.54 cm) or by 2.54 cm / (1 in) without changing its value. Thus if you multiply your height in inches by 2.54 cm / (1 in), you will get your height in cm. For example if your height is 69 in, your height in cm will be 69 in * 2.54 cm / (1 in) = 175 in * cm / in. in * cm / in = (in / in) * cm = 1 * cm = cm, so our calculation comes out 175 cm.
......!!!!!!!!...................................
RESPONSE --> I think I got the correct answer. self critique assessment: 3
.................................................
"