course Mth 158 ٓzƨ\~ȺӐ{請assignment #003
......!!!!!!!!...................................
14:11:32 `q001 A straight line connects the points (3, 5) and (7, 17), while another straight line continues on from (7, 17) to the point (10, 29). Which line is steeper and on what basis to you claim your result?
......!!!!!!!!...................................
RESPONSE --> The first line is steeper, because its going up at a fastr rate. confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:12:09 The point (3,5) has x coordinate 3 and y coordinate 5. The point (7, 17) has x coordinate 7 and y coordinate 17. To move from (3,5) to (7, 17) we must therefore move 4 units in the x direction and 12 units in the y direction. Thus between (3,5) and (7,17) the rise is 12 and the run is 4, so the rise/run ratio is 12/4 = 3. Between (7,10) and (10,29) the rise is also 12 but the run is only 3--same rise for less run, therefore more slope. The rise/run ratio here is 12/3 = 4.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
14:17:13 `q002. The expression (x-2) * (2x+5) is zero when x = 2 and when x = -2.5. Without using a calculator verify this, and explain why these two values of x, and only these two values of x, can make the expression zero.
......!!!!!!!!...................................
RESPONSE --> Because one side of the problem equal zero. confidence assessment: 0
.................................................
......!!!!!!!!...................................
14:17:55 If x = 2 then x-2 = 2 - 2 = 0, which makes the product (x -2) * (2x + 5) zero. If x = -2.5 then 2x + 5 = 2 (-2.5) + 5 = -5 + 5 = 0.which makes the product (x -2) * (2x + 5) zero. The only way to product (x-2)(2x+5) can be zero is if either (x -2) or (2x + 5) is zero. Note that (x-2)(2x+5) can be expanded using the Distributive Law to get x(2x+5) - 2(2x+5). Then again using the distributive law we get 2x^2 + 5x - 4x - 10 which simplifies to 2x^2 + x - 10. However this doesn't help us find the x values which make the expression zero. We are better off to look at the factored form.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
14:22:30 `q003. For what x values will the expression (3x - 6) * (x + 4) * (x^2 - 4) be zero?
......!!!!!!!!...................................
RESPONSE --> I don't know. confidence assessment: 0
.................................................
......!!!!!!!!...................................
14:23:01 In order for the expression to be zero we must have 3x-6 = 0 or x+4=0 or x^2-4=0. 3x-6 = 0 is rearranged to 3x = 6 then to x = 6 / 3 = 2. So when x=2, 3x-6 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero. x+4 = 0 gives us x = -4. So when x=-4, x+4 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero. x^2-4 = 0 is rearranged to x^2 = 4 which has solutions x = + - `sqrt(4) or + - 2. So when x=2 or when x = -2, x^2 - 4 = 0 and the entire product (3x - 6) * (x + 4) * (x^2 - 4) must be zero. We therefore see that (3x - 6) * (x + 4) * (x^2 - 4) = 0 when x = 2, or -4, or -2. These are the only values of x which can yield zero.**
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
14:28:51 `q004. One straight line segment connects the points (3,5) and (7,9) while another connects the points (10,2) and (50,4). From each of the four points a line segment is drawn directly down to the x axis, forming two trapezoids. Which trapezoid has the greater area? Try to justify your answer with something more precise than, for example, 'from a sketch I can see that this one is much bigger so it must have the greater area'.
......!!!!!!!!...................................
RESPONSE --> The second one does because it has a area of 100 and the is just 18 confidence assessment: 1
.................................................
......!!!!!!!!...................................
14:29:43 Your sketch should show that while the first trapezoid averages a little more than double the altitude of the second, the second is clearly much more than twice as wide and hence has the greater area. To justify this a little more precisely, the first trapezoid, which runs from x = 3 to x = 7, is 4 units wide while the second runs from x = 10 and to x = 50 and hence has a width of 40 units. The altitudes of the first trapezoid are 5 and 9,so the average altitude of the first is 7. The average altitude of the second is the average of the altitudes 2 and 4, or 3. So the first trapezoid is over twice as high, on the average, as the first. However the second is 10 times as wide, so the second trapezoid must have the greater area. This is all the reasoning we need to answer the question. We could of course multiply average altitude by width for each trapezoid, obtaining area 7 * 4 = 28 for the first and 3 * 40 = 120 for the second. However if all we need to know is which trapezoid has a greater area, we need not bother with this step.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 0
.................................................
......!!!!!!!!...................................
14:30:49 * `q005. Sketch graphs of y = x^2, y = 1/x and y = `sqrt(x) [note: `sqrt(x) means 'the square root of x'] for x > 0. We say that a graph increases if it gets higher as we move toward the right, and if a graph is increasing it has a positive slope. Explain which of the following descriptions is correct for each graph: As we move from left to right the graph increases as its slope increases. As we move from left to right the graph decreases as its slope increases. As we move from left to right the graph increases as its slope decreases. As we move from left to right the graph decreases as its slope decreases.
......!!!!!!!!...................................
RESPONSE --> As we move from left to right the graph increases as its slope decreases. self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:31:11 `q006. If the population of the frogs in your frog pond increased by 10% each month, starting with an initial population of 20 frogs, then how many frogs would you have at the end of each of the first three months (you can count fractional frogs, even if it doesn't appear to you to make sense)? Can you think of a strategy that would allow you to calculate the number of frogs after 300 months (according to this model, which probably wouldn't be valid for that long) without having to do at least 300 calculations?
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:31:31 At the end of the first month, the number of frogs in the pond would be (20 * .1) + 20 = 22 frogs. At the end of the second month there would be (22 * .1) + 22 = 24.2 frogs while at the end of the third month there would be (24.2 * .1) + 24.2 = 26.62 frogs. The key to extending the strategy is to notice that multiplying a number by .1 and adding it to the number is really the same as simply multiplying the number by 1.1. 10 * 1.1 = 22; 22 * 1.1 = 24.2; etc.. So after 300 months you will have multiplied by 1.1 a total of 300 times. This would give you 20 * 1.1^300, whatever that equals (a calculator will easily do the arithmetic). A common error is to say that 300 months at 10% per month gives 3,000 percent, so there would be 30 * 20 = 600 frogs after 30 months. That doesn't work because the 10% increase is applied to a greater number of frogs each time. 3000% would just be applied to the initial number, so it doesn't give a big enough answer.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:33:29 `q007. Calculate 1/x for x = 1, .1, .01 and .001. Describe the pattern you obtain. Why do we say that the values of x are approaching zero? What numbers might we use for x to continue approaching zero? What happens to the values of 1/x as we continue to approach zero? What do you think the graph of y = 1/x vs. x looks for x values between 0 and 1?
......!!!!!!!!...................................
RESPONSE --> Because there decreasing. .0001,.00001 They get smaller confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:33:38 If x = .1, for example, 1 / x = 1 / .1 = 10 (note that .1 goes into 1 ten times, since we can count to 1 by .1, getting.1, .2, .3, .4, ... .9, 10. This makes it clear that it takes ten .1's to make 1. So if x = .01, 1/x = 100 Ithink again of counting to 1, this time by .01). If x = .001 then 1/x = 1000, etc.. Note also that we cannot find a number which is equal to 1 / 0. Deceive why this is true, try counting to 1 by 0's. You can count as long as you want and you'll ever get anywhere. The values of 1/x don't just increase, they increase without bound. If we think of x approaching 0 through the values .1, .01, .001, .0001, ..., there is no limit to how big the reciprocals 10, 100, 1000, 10000 etc. can become. The graph becomes steeper and steeper as it approaches the y axis, continuing to do so without bound but never touching the y axis. This is what it means to say that the y axis is a vertical asymptote for the graph .
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:36:27 * `q008. At clock time t the velocity of a certain automobile is v = 3 t + 9. At velocity v its energy of motion is E = 800 v^2. What is the energy of the automobile at clock time t = 5?
......!!!!!!!!...................................
RESPONSE --> fist you would put 5 in the problem and get 24. Then you do E= 800 (5^2) and 20000 for E. self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:36:52 For t=5, v = 3 t + 9 = (3*5) + 9 = 24. Therefore E = 800 * 24^2 = 460800.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:37:37 * `q009. Continuing the preceding problem, can you give an expression for E in terms of t?
......!!!!!!!!...................................
RESPONSE --> I don't know self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:37:48 Since v = 3 t + 9 the expression would be E = 800 v^2 = 800 ( 3t + 9) ^2. This is the only answer really required here. For further reference, though, note that this expression could also be expanded by applying the Distributive Law:. Since (3t + 9 ) ^ 2 = (3 t + 9 ) * ( 3 t + 9 ) = 3t ( 3t + 9 ) + 9 * (3 t + 9) = 9 t^2 + 27 t + 27 t + 81 = 9 t^2 + 54 t + 81, we get E = 800 ( 9 t^2 + 54 t + 81) = 7200 t^2 + 43320 t + 64800 (check my multiplication because I did that in my head, which isn't always reliable).
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:37:59 end program
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
yvE|ښ}Ԕw assignment #001 001. Rates qa rates 01-16-2008
......!!!!!!!!...................................
14:44:39 `q001. You should copy and paste these instructions to a word processor for reference. However you can always view them, as well as everything else that has appeared in this box, by clicking the 'Display Everything' button. 1. For the next question or answer, you click on 'Next Question / Answer' button above the box at top left until a question has been posed. Once a question has been posed you are to answer before you click again on this button. 2. Before clicking for an answer, type your best answer to the current question into the box to the right, then clip on the 'Enter Answer' button. 3. After entering your answer you will click on 'Next Question / Answer' to view the answer to the question. Do not tamper with the information displayed in the left-hand box. 4. If your answer was incorrect, incomplete or would otherwise require revision, you will enter a self-critique. If you learned something from the answer, you need to restate it in your own words in order to reinforce your learning. If there is something you feel you should note for future reference, you should make a note in your own words. Go to the response box (the right-hand box) and type in a self-critique and/or notes, as appropriate. Do not copy and paste anything from the left-hand box, since that information will be saved in any case. 5. If you wish to save your response to your Notes file you may choose to click on the 'Save As Notes' button rather than the 'Enter Answer' button. Doing so will save your work for your future reference. Your work will be saved in a Notes file in the c:\vhmthphy folder. The title of the Notes file will also include the name you gave when you started the program. 6. After clicking either the 'Enter Response' or the 'Save as Notes' button, click on 'Next Question / Answer' and proceed in a similar manner. In the right-hand box briefly describe your understanding of these instructions, then click 'Enter Answer'.
......!!!!!!!!...................................
RESPONSE --> Yes I understand these instuctions. confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:44:50 Your answer has been noted. Enter 'ok' in the Response Box and click on Enter Response, then click on Next Question/Answer for the first real question.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:46:25 `q002. Note that there are 10 questions in this assignment. The questions are of increasing difficulty--the first questions are fairly easy but later questions are very tricky. The main purposes of these exercises are to refine your thinking about rates, and to see how you process challenging information. Continue as far as you can until you are completely lost. Students who are prepared for the highest-level math courses might not ever get lost. If you make $50 in 5 hr, then at what rate are you earning money?
......!!!!!!!!...................................
RESPONSE --> You will be getting $10 per hour. confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:46:51 The rate at which you are earning money is the number of dollars per hour you are earning. You are earning money at the rate of 50 dollars / (5 hours) = 10 dollars / hour. It is very likely that you immediately came up with the $10 / hour because almosteveryone is familiar with the concept of the pay rate, the number of dollars per hour. Note carefully that the pay rate is found by dividing the quantity earned by the time required to earn it. Time rates in general are found by dividing an accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:48:05 `q003.If you make $60,000 per year then how much do you make per month?
......!!!!!!!!...................................
RESPONSE --> You will be making $5000 per month. confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:48:19 Most people will very quickly see that we need to divide $60,000 by 12 months, giving us 60,000 dollars / (12 months) = 5000 dollars / month. Note that again we have found a time rate, dividing the accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:49:06 `q004. Suppose that the $60,000 is made in a year by a small business. Would be more appropriate to say that the business makes $5000 per month, or that the business makes an average of $5000 per month?
......!!!!!!!!...................................
RESPONSE --> That the business makes an average of $5000 per month. confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:49:32 Small businesses do not usually make the same amount of money every month. The amount made depends on the demand for the services or commodities provided by the business, and there are often seasonal fluctuations in addition to other market fluctuations. It is almost certain that a small business making $60,000 per year will make more than $5000 in some months and less than $5000 in others. Therefore it is much more appropriate to say that the business makes and average of $5000 per month. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:51:08 `q005. If you travel 300 miles in 6 hours, at what average rate are you covering distance, and why do we say average rate instead of just plain rate?
......!!!!!!!!...................................
RESPONSE --> It will be a average rate of 50 and you don't know how fst they are going so it might be more or less. confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:51:24 The average rate is 50 miles per hour, or 50 miles / hour. This is obtained by dividing the accumulated quantity, the 300 miles, by the time required to accumulate it, obtaining ave rate = 300 miles / ( 6 hours) = 50 miles / hour. Note that the rate at which distance is covered is called speed. The car has an average speed of 50 miles/hour. We say 'average rate' in this case because it is almost certain that slight changes in pressure on the accelerator, traffic conditions and other factors ensure that the speed will sometimes be greater than 50 miles/hour and sometimes less than 50 miles/hour; the 50 miles/hour we obtain from the given information is clearly and overall average of the velocities. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:52:33 `q006. If you use 60 gallons of gasoline on a 1200 mile trip, then at what average rate are you using gasoline, with respect to miles traveled?
......!!!!!!!!...................................
RESPONSE --> I don't know. confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:52:41 The rate of change of one quantity with respect to another is the change in the first quantity, divided by the change in the second. As in previous examples, we found the rate at which money was made with respect to time by dividing the amount of money made by the time required to make it. By analogy, the rate at which we use fuel with respect to miles traveled is the change in the amount of fuel divided by the number of miles traveled. In this case we use 60 gallons of fuel in 1200 miles, so the average rate it 60 gal / (1200 miles) = .05 gallons / mile. Note that this question didn't ask for miles per gallon. Miles per gallon is an appropriate and common calculation, but it measures the rate at which miles are covered with respect to the amount of fuel used. Be sure you see the difference. Note that in this problem we again have here an example of a rate, but unlike previous instances this rate is not calculated with respect to time. This rate is calculated with respect to the amount of fuel used. We divide the accumulated quantity, in this case miles, by the amount of fuel required to cover those miles. Note that again we call the result of this problem an average rate because there are always at least subtle differences in driving conditions that require the use of more fuel on some miles than on others. It's very important to understand the phrase 'with respect to'. Whether the calculation makes sense or not, it is defined by the order of the terms. In this case gallons / mile tells you how many gallons you are burning, on the average, per mile. This concept is not as familiar as miles / gallon, but except for familiarity it's technically no more difficult. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:53:44 `q007. The word 'average' generally connotes something like adding two quantities and dividing by 2, or adding several quantities and dividing by the number of quantities we added. Why is it that we are calculating average rates but we aren't adding anything?
......!!!!!!!!...................................
RESPONSE --> Because they have already added for us. confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:53:54 The word 'average' in the context of the dollars / month, miles / gallon types of questions we have been answering was used because we expect that in different months different amounts were earned, or that over different parts of the trip the gas mileage might have varied, but that if we knew all the individual quantities (e.g., the dollars earned each month, the number of gallons used with each mile) and averaged them in the usual manner, we would get the .05 gallons / mile, or the $5000 / month. In a sense we have already added up all the dollars earned in each month, or the miles traveled on each gallon, and we have obtained the total $60,000 or 1200 miles. Thus when we divide by the number of months or the number of gallons, we are in fact calculating an average rate. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:55:55 `q008. In a study of how lifting strength is influenced by various ways of training, a study group was divided into 2 subgroups of equally matched individuals. The first group did 10 pushups per day for a year and the second group did 50 pushups per day for year. At the end of the year to lifting strength of the first group averaged 147 pounds, while that of the second group averaged 162 pounds. At what average rate did lifting strength increase per daily pushup?
......!!!!!!!!...................................
RESPONSE --> The average rate is 5 pushups. confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:56:08 `q009. In another part of the study, participants all did 30 pushups per day, but one group did pushups with a 10-pound weight on their shoulders while the other used a 30-pound weight. At the end of the study, the first group had an average lifting strength of 171 pounds, while the second had an average lifting strength of 188 pounds. At what average rate did lifting strength increase with respect to the added shoulder weight?
......!!!!!!!!...................................
RESPONSE --> confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:56:53 01-16-2008 14:56:53 The difference in lifting strength was 17 pounds, as a result of a 20 pound difference in added weight. The average rate at which strength increases with respect added weight would therefore be 17 lifting pounds / (20 added pounds) = .85 lifting pounds / added pound. The strength advantage was .85 lifting pounds per pound of added weight, on the average. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
NOTES -------> ok
.......................................................!!!!!!!!...................................
14:56:56 The difference in lifting strength was 17 pounds, as a result of a 20 pound difference in added weight. The average rate at which strength increases with respect added weight would therefore be 17 lifting pounds / (20 added pounds) = .85 lifting pounds / added pound. The strength advantage was .85 lifting pounds per pound of added weight, on the average. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment: 3
.................................................
......!!!!!!!!...................................
14:57:45 `q010. During a race, a runner passes the 100-meter mark 12 seconds after the start and the 200-meter mark 22 seconds after the start. At what average rate was the runner covering distance between those two positions?
......!!!!!!!!...................................
RESPONSE --> The average rate is 10. confidence assessment:
.................................................
......!!!!!!!!...................................
14:57:54 The runner traveled 100 meters between the two positions, and required 10 seconds to do so. The average rate at which the runner was covering distance was therefore 100 meters / (10 seconds) = 10 meters / second. Again this is an average rate; at different positions in his stride the runner would clearly be traveling at slightly different speeds. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:59:47 `q011. During a race, a runner passes the 100-meter mark moving at 10 meters / second, and the 200-meter mark moving at 9 meters / second. What is your best estimate of how long it takes the runner to cover the 100 meter distance?
......!!!!!!!!...................................
RESPONSE --> The best eismate is 10 sec. confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:59:53 At 10 meters/sec, the runner would require 10 seconds to travel 100 meters. However the runner seems to be slowing, and will therefore require more than 10 seconds to travel the 100 meters. We don't know what the runner's average speed is, we only know that it goes from 10 m/s to 9 m/s. The simplest estimate we could make would be that the average speed is the average of 10 m/s and 9 m/s, or (10 m/s + 9 m/s ) / 2 = 9.5 m/s. Taking this approximation as the average rate, the time required to travel 100 meters will be (100 meters) / (9.5 m/s) = 10.5 sec, approx.. Note that simply averaging the 10 m/s and the 9 m/s might not be the best way to approximate the average rate--for example we if we knew enough about the situation we might expect that this runner would maintain the 10 m/s for most of the remaining 100 meters, and simply tire during the last few seconds. However we were not given this information, and we don't add extraneous assumptions without good cause. So the approximation we used here is pretty close to the best we can do with the given information. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:00:22 `q012. We just averaged two quantities, adding them in dividing by 2, to find an average rate. We didn't do that before. Why we do it now?
......!!!!!!!!...................................
RESPONSE --> Because we had two different numbers. confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:00:29 In previous examples the quantities weren't rates. We were given the amount of change of some accumulating quantity, and the change in time or in some other quantity on which the first was dependent (e.g., dollars and months, miles and gallons). Here we are given 2 rates, 10 m/s and 9 m/s, in a situation where we need an average rate in order to answer a question. Within this context, averaging the 2 rates was an appropriate tactic. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
15:00:38 end program
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 1
.................................................
ؼ{N۠ڼ|fl|y\ǂx assignment #001 001. Areas qa areas volumes misc 01-16-2008
......!!!!!!!!...................................
15:04:07 `q001. There are 11 questions and 7 summary questions in this assignment. What is the area of a rectangle whose dimensions are 4 m by 3 meters.
......!!!!!!!!...................................
RESPONSE --> 12 confidence assessment: 3
.................................................
......!!!!!!!!...................................
15:04:28 A 4 m by 3 m rectangle can be divided into 3 rows of 4 squares, each 1 meter on a side. This makes 3 * 4 = 12 such squares. Each 1 meter square has an area of 1 square meter, or 1 m^2. The total area of the rectangle is therefore 12 square meters, or 12 m^2. The formula for the area of a rectangle is A = L * W, where L is the length and W the width of the rectangle. Applying this formula to the present problem we obtain area A = L * W = 4 m * 3 m = (4 * 3) ( m * m ) = 12 m^2. Note the use of the unit m, standing for meters, in the entire calculation. Note that m * m = m^2.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
15:05:33 `q002. What is the area of a right triangle whose legs are 4.0 meters and 3.0 meters?
......!!!!!!!!...................................
RESPONSE --> Times 4 and 3 and divide by a half and you will get 6. A=1/2bh confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:05:42 A right triangle can be joined along its hypotenuse with another identical right triangle to form a rectangle. In this case the rectangle would have dimensions 4.0 meters by 3.0 meters, and would be divided by any diagonal into two identical right triangles with legs of 4.0 meters and 3.0 meters. The rectangle will have area A = L * W = 4.0 m * 3.0 m = 12 m^2, as explained in the preceding problem. Each of the two right triangles, since they are identical, will therefore have half this area, or 1/2 * 12 m^2 = 6.0 m^2. The formula for the area of a right triangle with base b and altitude h is A = 1/2 * b * h.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:06:13 `q003. What is the area of a parallelogram whose base is 5.0 meters and whose altitude is 2.0 meters?
......!!!!!!!!...................................
RESPONSE --> I think it will be ten. confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:06:24 A parallelogram is easily rearranged into a rectangle by 'cutting off' the protruding end, turning that portion upside down and joining it to the other end. Hopefully you are familiar with this construction. In any case the resulting rectangle has sides equal to the base and the altitude so its area is A = b * h. The present rectangle has area A = 5.0 m * 2.0 m = 10 m^2.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:06:55 `q004. What is the area of a triangle whose base is 5.0 cm and whose altitude is 2.0 cm?
......!!!!!!!!...................................
RESPONSE --> The area will be 5cm confidence assessment: 3
.................................................
......!!!!!!!!...................................
15:07:08 It is possible to join any triangle with an identical copy of itself to construct a parallelogram whose base and altitude are equal to the base and altitude of the triangle. The area of the parallelogram is A = b * h, so the area of each of the two identical triangles formed by 'cutting' the parallelogram about the approriate diagonal is A = 1/2 * b * h. The area of the present triangle is therefore A = 1/2 * 5.0 cm * 2.0 cm = 1/2 * 10 cm^2 = 5.0 cm^2.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:07:32 `q005. What is the area of a trapezoid with a width of 4.0 km and average altitude of 5.0 km?
......!!!!!!!!...................................
RESPONSE --> Ithink it will be 20km confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:07:40 Any trapezoid can be reconstructed to form a rectangle whose width is equal to that of the trapezoid and whose altitude is equal to the average of the two altitudes of the trapezoid. The area of the rectangle, and therefore the trapezoid, is therefore A = base * average altitude. In the present case this area is A = 4.0 km * 5.0 km = 20 km^2.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:08:20 `q006. What is the area of a trapezoid whose width is 4 cm in whose altitudes are 3.0 cm and 8.0 cm?
......!!!!!!!!...................................
RESPONSE --> I think it will 36cm confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:08:32 The area is equal to the product of the width and the average altitude. Average altitude is (3 cm + 8 cm) / 2 = 5.5 cm so the area of the trapezoid is A = 4 cm * 5.5 cm = 22 cm^2.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:11:59 `q007. What is the area of a circle whose radius is 3.00 cm?
......!!!!!!!!...................................
RESPONSE --> A=pir^2. The area is 93.22cm confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:13:04 The area of a circle is A = pi * r^2, where r is the radius. Thus A = pi * (3 cm)^2 = 9 pi cm^2. Note that the units are cm^2, since the cm unit is part r, which is squared. The expression 9 pi cm^2 is exact. Any decimal equivalent is an approximation. Using the 3-significant-figure approximation pi = 3.14 we find that the approximate area is A = 9 pi cm^2 = 9 * 3.14 cm^2 = 28.26 cm^2, which we round to 28.3 cm^2 to match the number of significant figures in the given radius. Be careful not to confuse the formula A = pi r^2, which gives area in square units, with the formula C = 2 pi r for the circumference. The latter gives a result which is in units of radius, rather than square units. Area is measured in square units; if you get an answer which is not in square units this tips you off to the fact that you've made an error somewhere.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:13:23 `q008. What is the circumference of a circle whose radius is exactly 3 cm?
......!!!!!!!!...................................
RESPONSE --> I don't know confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:14:07 The circumference of this circle is C = 2 pi r = 2 pi * 3 cm = 6 pi cm. This is the exact area. An approximation to 3 significant figures is 6 * 3.14 cm = 18.84 cm. Note that circumference is measured in the same units as radius, in this case cm, and not in cm^2. If your calculation gives you cm^2 then you know you've done something wrong.
......!!!!!!!!...................................
RESPONSE --> i didn't know how to find circumference. self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:15:50 `q009. What is the area of a circle whose diameter is exactly 12 meters?
......!!!!!!!!...................................
RESPONSE --> 113.04 meters confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:16:03 The area of a circle is A = pi r^2, where r is the radius. The radius of this circle is half the 12 m diameter, or 6 m. So the area is A = pi ( 6 m )^2 = 36 pi m^2. This result can be approximated to any desired accuracy by using a sufficient number of significant figures in our approximation of pi. For example using the 5-significant-figure approximation pi = 3.1416 we obtain A = 36 m^2 * 3.1416 = 113.09 m^2.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:16:19 `q010. What is the area of a circle whose circumference is 14 `pi meters?
......!!!!!!!!...................................
RESPONSE --> I don't know. confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:16:43 We know that A = pi r^2. We can find the area if we know the radius r. We therefore attempt to use the given information to find r. We know that circumference and radius are related by C = 2 pi r. Solving for r we obtain r = C / (2 pi). In this case we find that r = 14 pi m / (2 pi) = (14/2) * (pi/pi) m = 7 * 1 m = 7 m. We use this to find the area A = pi * (7 m)^2 = 49 pi m^2.
......!!!!!!!!...................................
RESPONSE --> I really didn't know how to do this self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:17:15 `q011. What is the radius of circle whose area is 78 square meters?
......!!!!!!!!...................................
RESPONSE --> 3 confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:17:22 Knowing that A = pi r^2 we solve for r. We first divide both sides by pi to obtain A / pi = r^2. We then reverse the sides and take the square root of both sides, obtaining r = sqrt( A / pi ). Note that strictly speaking the solution to r^2 = A / pi is r = +-sqrt( A / pi ), meaning + sqrt( A / pi) or - sqrt(A / pi). However knowing that r and A are both positive quantities, we can reject the negative solution. Now we substitute A = 78 m^2 to obtain r = sqrt( 78 m^2 / pi) = sqrt(78 / pi) m.{} Approximating this quantity to 2 significant figures we obtain r = 5.0 m.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:17:50 `q012. Summary Question 1: How do we visualize the area of a rectangle?
......!!!!!!!!...................................
RESPONSE --> The four sides of it. confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:17:58 We visualize the rectangle being covered by rows of 1-unit squares. We multiply the number of squares in a row by the number of rows. So the area is A = L * W.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:18:13 `q013. Summary Question 2: How do we visualize the area of a right triangle?
......!!!!!!!!...................................
RESPONSE --> The hight of the triangle confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:18:20 We visualize two identical right triangles being joined along their common hypotenuse to form a rectangle whose length is equal to the base of the triangle and whose width is equal to the altitude of the triangle. The area of the rectangle is b * h, so the area of each triangle is 1/2 * b * h.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
15:18:37 `q014. Summary Question 3: How do we calculate the area of a parallelogram?
......!!!!!!!!...................................
RESPONSE --> A=bh confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:18:46 The area of a parallelogram is equal to the product of its base and its altitude. The altitude is measured perpendicular to the base.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:19:01 `q015. Summary Question 4: How do we calculate the area of a trapezoid?
......!!!!!!!!...................................
RESPONSE --> A=bh confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:19:14 We think of the trapezoid being oriented so that its two parallel sides are vertical, and we multiply the average altitude by the width.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:19:38 `q016. Summary Question 5: How do we calculate the area of a circle?
......!!!!!!!!...................................
RESPONSE --> A=pir^2 confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:19:44 We use the formula A = pi r^2, where r is the radius of the circle.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:20:02 `q017. Summary Question 6: How do we calculate the circumference of a circle? How can we easily avoid confusing this formula with that for the area of the circle?
......!!!!!!!!...................................
RESPONSE --> I don't know confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:20:23 We use the formula C = 2 pi r. The formula for the area involves r^2, which will give us squared units of the radius. Circumference is not measured in squared units.
......!!!!!!!!...................................
RESPONSE --> C = 2 pi r. ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:21:01 `q018. Explain how you have organized your knowledge of the principles illustrated by the exercises in this assignment.
......!!!!!!!!...................................
RESPONSE --> I wrote the forumlas down confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:21:11 This ends the first assignment.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:24:32 `q001. There are 9 questions and 4 summary questions in this assignment. What is the volume of a rectangular solid whose dimensions are exactly 3 cm by 5 cm by 7 cm?
......!!!!!!!!...................................
RESPONSE --> I think its 28cm confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:25:54 If we orient this object so that its 3 cm dimension is its 'height', then it will be 'resting' on a rectangular base whose dimension are 5 cm by 7 cm. This base can be divided into 5 rows each consisting of 7 squares, each 1 meter by 1 meter. There will therefore be 5 * 7 = 35 such squares, showing us that the area of the base is 35 m^2. Above each of these base squares the object rises to a distance of 3 meters, forming a small rectangular tower. Each such tower can be divided into 3 cubical blocks, each having dimension 1 meter by 1 meter by 1 meter. The volume of each 1-meter cube is 1 m * 1 m * 1 m = 1 m^3, also expressed as 1 cubic meter. So each small 'tower' has volume 3 m^3. The object can be divided into 35 such 'towers'. So the total volume is 35 * 3 m^3 = 105 m^3. This construction shows us why the volume of a rectangular solid is equal to the area of the base (in this example the 35 m^2 of the base) and the altitude (in this case 3 meters). The volume of any rectangular solid is therefore V = A * h, where A is the area of the base and h the altitude. This is sometimes expressed as V = L * W * h, where L and W are the length and width of the base. However the relationship V = A * h applies to a much broader class of objects than just rectangular solids, and V = A * h is a more powerful idea than V = L * W * h. Remember both, but remember also that V = A * h is the more important.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:26:47 `q002. What is the volume of a rectangular solid whose base area is 48 square meters and whose altitude is 2 meters?
......!!!!!!!!...................................
RESPONSE --> I think its 96m. confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:26:58 Using the idea that V = A * h we find that the volume of this solid is V = A * h = 48 m^2 * 2 m = 96 m^3. Note that m * m^2 means m * (m * m) = m * m * m = m^2.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
15:27:43 `q003. What is the volume of a uniform cylinder whose base area is 20 square meters and whose altitude is 40 meters?
......!!!!!!!!...................................
RESPONSE --> 800m confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:28:09 V = A * h applies to uniform cylinders as well as to rectangular solids. We are given the altitude h and the base area A so we conclude that V = A * h = 20 m^2 * 40 m = 800 m^3. The relationship V = A * h applies to any solid object whose cross-sectional area A is constant. This is the case for uniform cylinders and uniform prisms.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
15:28:39 `q004. What is the volume of a uniform cylinder whose base has radius 5 cm and whose altitude is 30 cm?
......!!!!!!!!...................................
RESPONSE --> 150cm confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:28:55 The cylinder is uniform, which means that its cross-sectional area is constant. So the relationship V = A * h applies. The cross-sectional area A is the area of a circle of radius 5 cm, so we see that A = pi r^2 = pi ( 5 cm)^2 = 25 pi cm^2. Since the altitude is 30 cm the volume is therefore V = A * h = 25 pi cm^2 * 30 cm = 750 pi cm^3. Note that the common formula for the volume of a uniform cylinder is V = pi r^2 h. However this is just an instance of the formula V = A * h, since the cross-sectional area A of the uniform cylinder is pi r^2. Rather than having to carry around the formula V = pi r^2 h, it's more efficient to remember V = A * h and to apply the well-known formula A = pi r^2 for the area of a circle.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
15:29:51 `q005. Estimate the dimensions of a metal can containing food. What is its volume, as indicated by your estimates?
......!!!!!!!!...................................
RESPONSE --> I think 29cm confidence assessment: 0
.................................................
......!!!!!!!!...................................
15:30:13 People will commonly estimate the dimensions of a can of food in centimeters or in inches, though other units of measure are possible (e.g., millimeters, feet, meters, miles, km). Different cans have different dimensions, and your estimate will depend a lot on what can you are using. A typical can might have a circular cross-section with diameter 3 inches and altitude 5 inches. This can would have volume V = A * h, where A is the area of the cross-section. The diameter of the cross-section is 3 inches so its radius will be 3/2 in.. The cross-sectional area is therefore A = pi r^2 = pi * (3/2 in)^2 = 9 pi / 4 in^2 and its volume is V = A * h = (9 pi / 4) in^2 * 5 in = 45 pi / 4 in^3. Approximating, this comes out to around 35 in^3. Another can around the same size might have diameter 8 cm and height 14 cm, giving it cross-sectional area A = pi ( 4 cm)^2 = 16 pi cm^2 and volume V = A * h = 16 pi cm^2 * 14 cm = 224 pi cm^2.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 0
.................................................
......!!!!!!!!...................................
15:31:28 `q006. What is the volume of a pyramid whose base area is 50 square cm and whose altitude is 60 cm?
......!!!!!!!!...................................
RESPONSE --> 1500square cm confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:31:46 We can't use the V = A * h idea for a pyramid because the thing doesn't have a constant cross-sectional area--from base to apex the cross-sections get smaller and smaller. It turns out that there is a way to cut up and reassemble a pyramid to show that its volume is exactly 1/3 that of a rectangular solid with base area A and altitude h. Think of putting the pyramid in a box having the same altitude as the pyramid, with the base of the pyramid just covering the bottom of the box. The apex (the point) of the pyramid will just touch the top of the box. The pyramid occupies exactly 1/3 the volume of that box. So the volume of the pyramid is V = 1/3 * A * h. The base area A is 30 cm^2 and the altitude is 60 cm so we have V = 1/3 * 50 cm^2 * 60 cm = 1000 cm^3.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
15:32:10 `q007. What is the volume of a cone whose base area is 20 square meters and whose altitude is 9 meters?
......!!!!!!!!...................................
RESPONSE --> !80 square meters confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:32:42 Just as the volume of a pyramid is 1/3 the volume of the 'box' that contains it, the volume of a cone is 1/3 the volume of the cylinder that contains it. Specifically, the cylinder that contains the cone has the base of the cone as its base and matches the altitude of the cone. So the volume of the cone is 1/3 A * h, where A is the area of the base and h is the altitude of the cone. In this case the base area and altitude are given, so the volume of the cone is V = 1/3 A * h = 1/3 * 20 m^2 * 9 m = 60 m^3.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 1
.................................................
......!!!!!!!!...................................
15:33:10 `q008. What is a volume of a sphere whose radius is 4 meters?
......!!!!!!!!...................................
RESPONSE --> I don't know confidence assessment: 0
.................................................
......!!!!!!!!...................................
15:33:27 The volume of a sphere is V = 4/3 pi r^3, where r is the radius of the sphere. In this case r = 4 m so V = 4/3 pi * (4 m)^3 = 4/3 pi * 4^3 m^3 = 256/3 pi m^3.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 0
.................................................
......!!!!!!!!...................................
15:33:40 `q009. What is the volume of a planet whose diameter is 14,000 km?
......!!!!!!!!...................................
RESPONSE --> I don't know confidence assessment: 0 ...."