course Phy 201
......!!!!!!!!...................................
12:52:39 `q001. Note that there are 14 questions in this assignment. If an object moves 12 meters in 4 seconds, then at what average rate is the object moving? Explain how you obtained your result in terms of commonsense images.
......!!!!!!!!...................................
RESPONSE --> If an object moves 12 meters in 4 seconds than the average rate of the object moving is 3 meters/sec. Commonsense images would reveal that 12 m/4 sec = 3 m/sec because distance over time results in the average rate of a moving object.
.................................................
......!!!!!!!!...................................
12:52:49 Moving 12 meters in 4 seconds, we move an average of 3 meters every second. We can imagine dividing up the 12 meters into four equal parts, one for each second. Each part will have 3 meters, corresponding to the distance moved in 1 second, on the average.
......!!!!!!!!...................................
RESPONSE --> Correct
.................................................
......!!!!!!!!...................................
12:54:22 `q002. How is this problem related to the concept of a rate?
......!!!!!!!!...................................
RESPONSE --> This problem is related to the concept of rate because rate is the change of position of the moving object. The distance travelled and the time were given, allowing us to deduce the position of movement within those constructs.
.................................................
......!!!!!!!!...................................
12:54:30 A rate is obtained by dividing the change in a quantity by the change in another quantity on which is dependent. In this case we divided the change in position by the time during which that change occurred.
......!!!!!!!!...................................
RESPONSE --> correct
.................................................
......!!!!!!!!...................................
12:56:34 `q003. Is object position dependent on time or is time dependent on object position?
......!!!!!!!!...................................
RESPONSE --> The object position and its rate are dependent on time
.................................................
......!!!!!!!!...................................
12:56:43 Object position is dependent on time--the clock runs whether the object is moving or not so time is independent of position. Clock time is pretty much independent of anything else.
......!!!!!!!!...................................
RESPONSE --> Correct
.................................................
......!!!!!!!!...................................
12:57:51 `q004. So the rate here is the average rate at which position is changing with respect to clock time. Explain what concepts, if any, you missed in your explanations.
......!!!!!!!!...................................
RESPONSE --> I correctly deduced that all variables are dependent on time because time is a construct that cannot be changed.
.................................................
......!!!!!!!!...................................
12:58:16 You should always self-critique your work in this manner. Always critique your solutions by describing any insights you had or errors you makde, and by explaining how you can make use of the insight or how you now know how to avoid certain errors. Also pose for the instructor any question or questions that you have related to the problem or series of problems.
......!!!!!!!!...................................
RESPONSE --> I do not have any questions at this current time.
.................................................
......!!!!!!!!...................................
13:03:45 `q005. If an object is displaced -6 meters in three seconds, then what is the average speed of the object what is its average velocity? Explain how you obtained your result in terms of commonsense images and ideas.
......!!!!!!!!...................................
RESPONSE --> If an object is displaced -6 meters in three seconds, then the average speed would be 2m/sec. The averge rate woudl equal the change in position oever the time interval so 6m / 3 sec = 2 m/sec
.................................................
......!!!!!!!!...................................
13:04:40 Speed is the average rate at which distance changes, and distance cannot be negative. Therefore speed cannot be negative. Velocity is the average rate at which position changes, and position changes can be positive or negative.
......!!!!!!!!...................................
RESPONSE --> Though I was looking for a generalized solution to this problem, it makes sense that speed cannot be negative but position changes can be
.................................................
......!!!!!!!!...................................
13:07:44 `q006. If `ds stands for the change in the position of an object and `dt for the time interval during which the position changes, then what expression stands for the average velocity vAve of the object during this time interval?
......!!!!!!!!...................................
RESPONSE --> I do not understand this question. The rate at which the position changes can be caluculated as vAve = 'ds / 'dt or 'ds = vAve * 'dt
.................................................
......!!!!!!!!...................................
13:07:57 Average velocity is rate of change of position. Change in position is `ds and change in clock tim is `dt, so vAve = `ds / `dt.
......!!!!!!!!...................................
RESPONSE --> Ok
.................................................
......!!!!!!!!...................................
13:08:53 `q007. How do you write the expressions `ds and `dt on your paper?
......!!!!!!!!...................................
RESPONSE --> The expressions 'ds and 'dt are delta s ('ds) and delta t ('dt)
.................................................
......!!!!!!!!...................................
13:09:09 You use the Greek capital Delta symbol Delta. `d is often used here because the symbol for Delta is not interpreted correctly by some Internet browsers. You should get in the habit of thinking and writing Delta when you see `d. You may use either `d or Delta when submitting work and answering questions.
......!!!!!!!!...................................
RESPONSE --> Ok
.................................................
......!!!!!!!!...................................
13:11:06 `q008. If an object changes position at an average rate of 5 meters/second for 10 seconds, then how far does it move? How is this problem related to the concept of a rate?
......!!!!!!!!...................................
RESPONSE --> If an object changes position at an average rate of 5 meters/second for 10 seconds then it moves 50 meters in 10 seconds. This is caluclated as 'ds = vAve * 'dt This problem is related to the concept of rate because the position changes the velocity
.................................................
......!!!!!!!!...................................
13:11:31 In this problem you are given the rate at which position changes with respect to time, and you are given the time interval during which to calculate the change in position. Given the rate at which one quantity changes with respect to another, and the change in the second quantity, how do we obtain the resulting change in the first?
......!!!!!!!!...................................
RESPONSE --> 'ds = vAve * 'dt
.................................................
......!!!!!!!!...................................
13:12:02 `q009. If vAve stands for the rate at which the position of the object changes (also called velocity) and `dt for the time interval during which the change in position is to be calculated, then how to we write the expression for the change `ds in the position?
......!!!!!!!!...................................
RESPONSE --> 'ds = Ave * 'dt
.................................................
......!!!!!!!!...................................
13:12:16 To find the change in a quantity we multiply the rate by the time interval during which the change occurs. We therefore obtain the change in position by multiplying the velocity by the time interval: `ds = vAve * `dt. The units of this calculation pretty much tell us what to do: Just as when we multiply pay rate by time (dollar / hr * hours of work) or automobile velocity by the time interval (miles / hour * hour), when we multiply vAve, in cm / sec or meters / sec or whatever, by `dt in seconds, we get displacement in cm or meters, or whatever, depending on the units of distance used.
......!!!!!!!!...................................
RESPONSE --> Ok
.................................................
......!!!!!!!!...................................
13:16:07 `q010. Explain how the quantities average velocity vAve, time interval `dt and displacement `ds are related by the definition of a rate, and how this relationship can be used to solve the current problem problem.
......!!!!!!!!...................................
RESPONSE --> the quantities average velocity vAve, time interval `dt and displacement `ds are related by the definition of a rate because they explain the position of an object and how it changes over a period of time. This can be solved for the current problem bu takeing the average velocity and multimplying it by the distance travelled to figure out the change in position.
.................................................
......!!!!!!!!...................................
13:16:20 vAve is the average rate at which position changes. The change in position is the displacement `ds, the change in clock time is `dt, so vAve = `ds / `dt.
......!!!!!!!!...................................
RESPONSE --> correct
.................................................
......!!!!!!!!...................................
13:18:43 `q011. The basic rate relationship vAve = `ds / `dt expresses the definition of average velocity vAve as the rate at which position s changes with respect to clock time t. What algebraic steps do we use to solve this equation for `ds, and what is our result?
......!!!!!!!!...................................
RESPONSE --> To solev for 'ds we use the formula 'ds = vAve * 'dt
.................................................
......!!!!!!!!...................................
13:19:38 To solve vAve = `ds / `dt for `ds, we multiply both sides by `dt. The steps: vAve = `ds / `dt. Multiply both sides by `dt: vAve * `dt = `ds / `dt * `dt Since `dt / `dt = 1 vAve * `dt = `ds . Switching sides we have `ds = vAve * `dt.
......!!!!!!!!...................................
RESPONSE --> I did not properly show the algabraic steps but instead took a shortcut. It would be beneficial for me to learn this middle steps in an effort to fully understand all of the material
.................................................
......!!!!!!!!...................................
13:33:36 `q012. How is this result related to our intuition about the meanings of the terms average velocity, displacement and clock time?
......!!!!!!!!...................................
RESPONSE --> This result is related to our intuition about the meanings of the terms average velocity, displacement, and clock time because it shows how they can be intertwined and solved as long as two of the variables are given.
.................................................
......!!!!!!!!...................................
13:33:55 Our most direct intuition about velocity probably comes from watching an automobile speedometer. We know that if we multiply our average velocity in mph by the duration `dt of the time interval during which we travel, we get the distance traveled in miles. From this we easily extend the idea. Whenever we multiply our average velocity by the duration of the time interval, we expect to obtain the displacement, or change in position, during that time interval.
......!!!!!!!!...................................
RESPONSE --> Ok
.................................................
......!!!!!!!!...................................
13:35:42 `q013. What algebraic steps do we use to solve the equation vAve = `ds / `dt for `dt, and what is our result?
......!!!!!!!!...................................
RESPONSE --> vAve = `ds / `dt vAve * 'dt = 'ds * 'dt/'dt vAve * 'dt = 'ds vAve/vAve * 'dt = 'ds / vAve 'dt = 'ds /vAve
.................................................
......!!!!!!!!...................................
13:35:58 To solve vAve = `ds / `dt for `dt, we must get `dt out of the denominator. Thus we first multiply both sides by the denominator `dt. Then we can see where we are and takes the appropriate next that. The steps: vAve = `ds / `dt. Multiply both sides by `dt: vAve * `dt = `ds / `dt * `dt Since `dt / `dt = 1 vAve * `dt = `ds. We can now divide both sides by vAve to get `dt = `ds / vAve.
......!!!!!!!!...................................
RESPONSE --> Corret
.................................................
......!!!!!!!!...................................
13:38:41 `q014. How is this result related to our intuition about the meanings of the terms average velocity, displacement and clock time?
......!!!!!!!!...................................
RESPONSE --> In this case we divided the average velocty by the time during which that change occurred to reveal the change of position.
.................................................
......!!!!!!!!...................................
13:38:46 If we want to know how long it will take to make a trip at a certain speed, we know to divide the distance in miles by the speed in mph. If we divide the number of miles we need to travel by the number of miles we travel in hour, we get the number of hours required. We extend this to the general concept of dividing the displacement by the velocity to get the duration of the time interval.
......!!!!!!!!...................................
RESPONSE --> Ok
.................................................
"