#$&* course PHY 201
.............................................
Given Solution: First way: KE change is equal to the work done by the net force, which is net force * displacement, or Fnet * `ds. Second way: KE change is also equal to Kef - KE0 = .5 m vf^2 - .5 m v0^2. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ********************************************* Question: `q (This question applies primarily to General College Physics students and University Physics students, though Principles of Physics students are encouraged, if they wish, to answer the question). In terms of the equations of motion why do we expect that a * `ds is proportional to the change in v^2, and why do we then expect that the change in v^2 is proportional to Fnet `ds? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: Because a*ds represents half the change in the velocity squared. confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: In a nutshell: • since vf^2 = v0^2 + 2 a `ds, a `ds = 1/2 (vf^2 - v0^2), so a `ds is proportional to the change in v^2 • since F_net = m a, F_net * `ds = m a * `ds so F_net * `ds is proportional to a * `ds • Thus F_net `ds is proportional to a * `ds, which in turn is proportional to the change in v^2. • Thus F_net `ds is proportional to the change in v^2. More detail: It's very important in physics to be able to think in terms of proportionality. • To say that y is proportional to x is to say that for some k, y = k x. • That is, y is a constant multiple of x. To say that a * `ds is proportional to the change in v^2 is to say that • for some k, a * `ds = k * ( change in v^2)--i.e., that • a * `ds is a constant multiple of the change in v^2. In terms of the equations of motion, we know that vf^2 = v0^2 + 2 a `ds so a `ds = 1/2 (vf^2 - v0^2), which is 1/2 the change in v^2. So a `ds is a constant multiple (1/2) of the change in v^2. Formally we have a `ds = k ( change in v^2) for the specific k value k = 1/2. Now since Fnet = m a, we conclude that Fnet * `ds = m a * `ds and since a `ds = k * ( change in v^2) for the specific k value k = 1/2, we substitute for a * `ds to get Fnet `ds = m * k * (change in v^2), for k = 1/2. Now m and k are constants, so m * k is constant. We can therefore revise our value of k, so that it becomes m * 1/2 or m / 2 With this revised value of k we have Fnet * `ds = k * (change in v^2), where now k has the value m / 2. That is, we don't expect Fnet * `ds to be proportional to the change in velocity v, but to the change in the square v^2 of the velocity. STUDENT COMMENT: I am still a bit confused. Going through the entire process I see how these values correlate but on my own I am not coming up with the correct solution. I am getting lost after we discover the a `ds is a constant multiple of (1/2) the change in v^2. Is it that I should simply substitute the k into the equation? Or am I missing something else? INSTRUCTOR RESPONSE: The short answer is that by the fourth equation of uniformly accelerated motion, a `ds = 1/2 (vf^2 - v0^2), which is half the change in v^2, so that a `ds is proportional to the change in v^2. (The proportionality constant between a `ds and change in v^2 is the constant number 1/2). F_net = m a, where m is the mass of the object. So F_net is proportional to a. (The proportionality constant between F_net and a is the constant mass m). Thus F_net `ds is proportional to a `ds, which we have seen is proportional to the change in v^2. The conclusion is the F_net `ds is proportional to the change in v^2. (The proportionality constant between F_net `ds and change in v^2 is 1/2 m.) &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique Rating: ok ********************************************* Question: How do our experimental results confirm or cause us to reject this hypothesis? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: In our experiment the object always accelerated from rest. confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The explanation for this result: On a ramp with fixed slope the acceleration is constant so • a `ds is simply proportional to `ds • specifically a `ds = k * `ds for k = a. In the preceding question we saw why • a * `ds = k * (change in v^2), with k = 1/2. In our experiment the object always accelerated from rest. So the change in v^2 for each trial would be from 0 to vf^2. the change would therefore be just • change in v^2 = vf^2 - 0^2 = vf^2. Thus if a `ds is proportional to the change in vf^2, our graph of vf^2 vs. a `ds should be linear. • The slope of this graph would just be our value of k in the proportionality a * `ds = k * (change in v^2), where as we have seen k = 1/2 We wouldn't even need to determine the actual value of the acceleration a. To confirm the hypothesis all we need is a linear graph of vf^2 vs. `ds. (we could of course use that slope with our proportionality to determine a, if desired) &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ok ------------------------------------------------ Self-critique Rating: ok ********************************************* Question: `qGeneral College Physics and Principles of Physics: convert 35 mi/hr to km/hr, m/s and ft/s. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: 35mi/hr=56.3km/h=15.6m/s=51.3ft/s confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: `aWe need a conversions between miles and meters, km and ft, and we also need conversions between hours and seconds. We know that 1 mile is 5280 ft, and 1 hour is 3600 seconds. We also know that 1 inch is 2.54 cm, and of course 1 foot is 12 inches. 1 mile is therefore 1 mile * 5280 ft / mile = 5280 ft, 5280 ft = 5280 ft * 12 in/ft * 2.54 cm / in = 160934 cm, which is the same as 160934 cm * 1 m / (100 cm) = 1609.34 m, which in turn is the same as 1609.34 m * 1 km / (1000 m) = 1.60934 km. Thus 35 mi / hr = 35 mi / hr * (1.60934 km / 1 mi) = 56 (mi * km / (mi * hr) ) = 56 (mi / mi) * (km / hr) = 56 km / hr. we can in turn convert this result to m / s: 56 km/hr * (1000 m / km) * (1 hr / 3600 sec) = 15.6 (km * m * hr) / (hr * km * sec) = 15.6 (km / km) * (hr / hr) * (m / s) = 15.6 m/s. The original 35 mi/hr can be converted directly to ft / sec: 35 mi/hr * ( 5280 ft / mi) * ( 1 hr / 3600 sec) = 53.33 ft/sec. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ********************************************* Question: `qGen phy and prin phy prob 2.16: sports car 95 km/h stops in 6.2 s; find acceleration YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: 26.4m/s/6.2=4.26m/s^2 confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: `a** 95 km/hr = 95,000 m / (3600 sec) = 26.3 m/s. So change in velocity is `dv = 0 m/s - 26.3 m/s = -26.3 m/s. Average acceleration is aAve = `dv / `dt = -26.3 m/s / (6.2 s) = -4.2 m/s^2. Acceleration is rate of velocity change = change in velocity / change in clock time = -25 m/s / (4 s) = -4.2 m/s^2. Extension: One 'g' is the acceleration of gravity, 9.8 m/s^2. So the given acceleration is -4.2m/s^2 / [ (9.8 m/s^2) / 'g' ] = -.43 'g'. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ********************************************* Question: univ phy 2.66 train 25m/s 200 m behind 15 m/s train, accel at -.1 m/s^2. Will the trains collide and if so where? Describe your graph. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: If we assume the passenger train is at position x = 0 at clock time t = 0 we conclude that the position function is x(t) = x0 + v0 t + .5 a t^2; in this case a = -.1 m/s&2 and x0 was chosen to be 0 so we have x(t) = 25 m/s * t + .5 * (-.1m/s^2) * t^2 = 25 m/s * t - .05 m/s^2 * t^2. To distinguish the two trains we'll rename this function x1(t) so that x1(t) = 25 m/s * t - .05 m/s^2 * t^2. At t = 0 the freight train, which does not change speed so has acceleration 0 and constant velocity 15 m/s, is 200 m ahead of the passenger train, so the position function for the freight train is x2(t) = 200 m + 15 m/s * t . The positions will be equal if x1 = x2, which will occur at any clock time t which solves the equation 25 t - .05 t^2 = 200 + 15 t(units are suppressed here but we see from the units of the original functions that solutions t will be in seconds). Rearranging the equation we have -.05 t^2 + 10 t - 200 = 0. The quadratic formula tells us that solutions are t = [ - 10 +- sqrt( 10^2 - 4 * (-.05) * (-200) ) ] / ( 2 * .05 ) Simplifying we get solutions t = 22.54 and t = 177.46. At t = 22.54 seconds the trains will collide. Had the trains been traveling on parallel tracks this would be the instant at which the first train overtakes the second. t = 177.46 sec would be the instant at which the second train again pulled ahead of the slowing first train. However since the trains are on the same track, the accelerations of both trains will presumably change at the instant of collision and the t = 177.46 sec solution will not apply. GOOD STUDENT SOLUTION: for the two trains to colide, the 25 m/s train must have a greater velocity than the 15 m/s train. So I can use Vf = V0 + a('dt). 15 = 25 + (-.1)('dt) -10 = -.('dt) 'dt = 100 so unless the displacement of the 25 m/s train is greater than the 15 m/s train in 100 s, their will be no colision. 'ds = 15 m/s(100) + 200 m 'ds = 1700 m 'ds = 25 m/s(100) + .5(-.1)(100^2) = 2000 m. The trains collide. ** Self Critique: " Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `qGeneral College Physics and Principles of Physics: convert 35 mi/hr to km/hr, m/s and ft/s. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: 35mi/hr=56.3km/h=15.6m/s=51.3ft/s confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: `aWe need a conversions between miles and meters, km and ft, and we also need conversions between hours and seconds. We know that 1 mile is 5280 ft, and 1 hour is 3600 seconds. We also know that 1 inch is 2.54 cm, and of course 1 foot is 12 inches. 1 mile is therefore 1 mile * 5280 ft / mile = 5280 ft, 5280 ft = 5280 ft * 12 in/ft * 2.54 cm / in = 160934 cm, which is the same as 160934 cm * 1 m / (100 cm) = 1609.34 m, which in turn is the same as 1609.34 m * 1 km / (1000 m) = 1.60934 km. Thus 35 mi / hr = 35 mi / hr * (1.60934 km / 1 mi) = 56 (mi * km / (mi * hr) ) = 56 (mi / mi) * (km / hr) = 56 km / hr. we can in turn convert this result to m / s: 56 km/hr * (1000 m / km) * (1 hr / 3600 sec) = 15.6 (km * m * hr) / (hr * km * sec) = 15.6 (km / km) * (hr / hr) * (m / s) = 15.6 m/s. The original 35 mi/hr can be converted directly to ft / sec: 35 mi/hr * ( 5280 ft / mi) * ( 1 hr / 3600 sec) = 53.33 ft/sec. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ********************************************* Question: `qGen phy and prin phy prob 2.16: sports car 95 km/h stops in 6.2 s; find acceleration YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: 26.4m/s/6.2=4.26m/s^2 confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: `a** 95 km/hr = 95,000 m / (3600 sec) = 26.3 m/s. So change in velocity is `dv = 0 m/s - 26.3 m/s = -26.3 m/s. Average acceleration is aAve = `dv / `dt = -26.3 m/s / (6.2 s) = -4.2 m/s^2. Acceleration is rate of velocity change = change in velocity / change in clock time = -25 m/s / (4 s) = -4.2 m/s^2. Extension: One 'g' is the acceleration of gravity, 9.8 m/s^2. So the given acceleration is -4.2m/s^2 / [ (9.8 m/s^2) / 'g' ] = -.43 'g'. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): OK ********************************************* Question: univ phy 2.66 train 25m/s 200 m behind 15 m/s train, accel at -.1 m/s^2. Will the trains collide and if so where? Describe your graph. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: If we assume the passenger train is at position x = 0 at clock time t = 0 we conclude that the position function is x(t) = x0 + v0 t + .5 a t^2; in this case a = -.1 m/s&2 and x0 was chosen to be 0 so we have x(t) = 25 m/s * t + .5 * (-.1m/s^2) * t^2 = 25 m/s * t - .05 m/s^2 * t^2. To distinguish the two trains we'll rename this function x1(t) so that x1(t) = 25 m/s * t - .05 m/s^2 * t^2. At t = 0 the freight train, which does not change speed so has acceleration 0 and constant velocity 15 m/s, is 200 m ahead of the passenger train, so the position function for the freight train is x2(t) = 200 m + 15 m/s * t . The positions will be equal if x1 = x2, which will occur at any clock time t which solves the equation 25 t - .05 t^2 = 200 + 15 t(units are suppressed here but we see from the units of the original functions that solutions t will be in seconds). Rearranging the equation we have -.05 t^2 + 10 t - 200 = 0. The quadratic formula tells us that solutions are t = [ - 10 +- sqrt( 10^2 - 4 * (-.05) * (-200) ) ] / ( 2 * .05 ) Simplifying we get solutions t = 22.54 and t = 177.46. At t = 22.54 seconds the trains will collide. Had the trains been traveling on parallel tracks this would be the instant at which the first train overtakes the second. t = 177.46 sec would be the instant at which the second train again pulled ahead of the slowing first train. However since the trains are on the same track, the accelerations of both trains will presumably change at the instant of collision and the t = 177.46 sec solution will not apply. GOOD STUDENT SOLUTION: for the two trains to colide, the 25 m/s train must have a greater velocity than the 15 m/s train. So I can use Vf = V0 + a('dt). 15 = 25 + (-.1)('dt) -10 = -.('dt) 'dt = 100 so unless the displacement of the 25 m/s train is greater than the 15 m/s train in 100 s, their will be no colision. 'ds = 15 m/s(100) + 200 m 'ds = 1700 m 'ds = 25 m/s(100) + .5(-.1)(100^2) = 2000 m. The trains collide. ** Self Critique: " Self-critique (if necessary): ------------------------------------------------ Self-critique rating: #*&!