course Phy202 lϋSݹXwÆzǁassignment #002
......!!!!!!!!...................................
21:23:33 `q001. There are 9 questions and 4 summary questions in this assignment. What is the volume of a rectangular solid whose dimensions are exactly 3 cm by 5 cm by 7 cm?
......!!!!!!!!...................................
RESPONSE --> 3 cm * 5 cm *7cm = 105 cm^3 Volume = LWH confidence assessment: 3
.................................................
......!!!!!!!!...................................
21:25:17 If we orient this object so that its 3 cm dimension is its 'height', then it will be 'resting' on a rectangular base whose dimension are 5 cm by 7 cm. This base can be divided into 5 rows each consisting of 7 squares, each 1 meter by 1 meter. There will therefore be 5 * 7 = 35 such squares, showing us that the area of the base is 35 m^2. Above each of these base squares the object rises to a distance of 3 meters, forming a small rectangular tower. Each such tower can be divided into 3 cubical blocks, each having dimension 1 meter by 1 meter by 1 meter. The volume of each 1-meter cube is 1 m * 1 m * 1 m = 1 m^3, also expressed as 1 cubic meter. So each small 'tower' has volume 3 m^3. The object can be divided into 35 such 'towers'. So the total volume is 35 * 3 m^3 = 105 m^3. This construction shows us why the volume of a rectangular solid is equal to the area of the base (in this example the 35 m^2 of the base) and the altitude (in this case 3 meters). The volume of any rectangular solid is therefore V = A * h, where A is the area of the base and h the altitude. This is sometimes expressed as V = L * W * h, where L and W are the length and width of the base. However the relationship V = A * h applies to a much broader class of objects than just rectangular solids, and V = A * h is a more powerful idea than V = L * W * h. Remember both, but remember also that V = A * h is the more important.
......!!!!!!!!...................................
RESPONSE --> I am thinking the answer should be in cubic centimeters self critique assessment: 2
.................................................
......!!!!!!!!...................................
21:27:03 `q002. What is the volume of a rectangular solid whose base area is 48 square meters and whose altitude is 2 meters?
......!!!!!!!!...................................
RESPONSE --> Volume = (Area of Base) (h) Volume = (48 m^2)(2m) = 96 m^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
21:27:15 Using the idea that V = A * h we find that the volume of this solid is V = A * h = 48 m^2 * 2 m = 96 m^3. Note that m * m^2 means m * (m * m) = m * m * m = m^2.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
21:29:25 `q003. What is the volume of a uniform cylinder whose base area is 20 square meters and whose altitude is 40 meters?
......!!!!!!!!...................................
RESPONSE --> If we can calculate the area of the circle and then multiply it by the altitude, we should then get the volume. Volume =(20 m^2)(40m) = 800 m^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
21:29:36 V = A * h applies to uniform cylinders as well as to rectangular solids. We are given the altitude h and the base area A so we conclude that V = A * h = 20 m^2 * 40 m = 800 m^3. The relationship V = A * h applies to any solid object whose cross-sectional area A is constant. This is the case for uniform cylinders and uniform prisms.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
21:32:33 `q004. What is the volume of a uniform cylinder whose base has radius 5 cm and whose altitude is 30 cm?
......!!!!!!!!...................................
RESPONSE --> Area of circle = Pi * r^2 Area = (3.14)(5cm)^2 = 15.70 cm^2 Volume = Area of base * height Volume = 15.70 cm^2 * 30 cm = 47.10 cm^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
21:33:18 The cylinder is uniform, which means that its cross-sectional area is constant. So the relationship V = A * h applies. The cross-sectional area A is the area of a circle of radius 5 cm, so we see that A = pi r^2 = pi ( 5 cm)^2 = 25 pi cm^2. Since the altitude is 30 cm the volume is therefore V = A * h = 25 pi cm^2 * 30 cm = 750 pi cm^3. Note that the common formula for the volume of a uniform cylinder is V = pi r^2 h. However this is just an instance of the formula V = A * h, since the cross-sectional area A of the uniform cylinder is pi r^2. Rather than having to carry around the formula V = pi r^2 h, it's more efficient to remember V = A * h and to apply the well-known formula A = pi r^2 for the area of a circle.
......!!!!!!!!...................................
RESPONSE --> I just made a careless error by not squaring the 5 cm. Understood self critique assessment: 1
.................................................
......!!!!!!!!...................................
21:43:09 `q005. Estimate the dimensions of a metal can containing food. What is its volume, as indicated by your estimates?
......!!!!!!!!...................................
RESPONSE --> The can is estimated to have a radius of 2 cm and is 5 cm in height. The volume = the area of the base times the height. Area = Pi * r^2 Area = (3.14)(2cm)^2 Area = (3.14)(4cm^2) Area = 12.56 cm^2 Volume = (12.56cm^2)(5cm) Volume = 62.80 cm^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
21:44:20 People will commonly estimate the dimensions of a can of food in centimeters or in inches, though other units of measure are possible (e.g., millimeters, feet, meters, miles, km). Different cans have different dimensions, and your estimate will depend a lot on what can you are using. A typical can might have a circular cross-section with diameter 3 inches and altitude 5 inches. This can would have volume V = A * h, where A is the area of the cross-section. The diameter of the cross-section is 3 inches so its radius will be 3/2 in.. The cross-sectional area is therefore A = pi r^2 = pi * (3/2 in)^2 = 9 pi / 4 in^2 and its volume is V = A * h = (9 pi / 4) in^2 * 5 in = 45 pi / 4 in^3. Approximating, this comes out to around 35 in^3. Another can around the same size might have diameter 8 cm and height 14 cm, giving it cross-sectional area A = pi ( 4 cm)^2 = 16 pi cm^2 and volume V = A * h = 16 pi cm^2 * 14 cm = 224 pi cm^2.
......!!!!!!!!...................................
RESPONSE --> Understood self critique assessment: 3
.................................................
......!!!!!!!!...................................
21:48:01 `q006. What is the volume of a pyramid whose base area is 50 square cm and whose altitude is 60 cm?
......!!!!!!!!...................................
RESPONSE --> V = (Bh)/3 The area of the base is 50 cm^2 and the altitude is 60 cm. V = (50cm^2)(60cm) = 3000cm^3 confidence assessment: 2
.................................................
......!!!!!!!!...................................
21:49:02 We can't use the V = A * h idea for a pyramid because the thing doesn't have a constant cross-sectional area--from base to apex the cross-sections get smaller and smaller. It turns out that there is a way to cut up and reassemble a pyramid to show that its volume is exactly 1/3 that of a rectangular solid with base area A and altitude h. Think of putting the pyramid in a box having the same altitude as the pyramid, with the base of the pyramid just covering the bottom of the box. The apex (the point) of the pyramid will just touch the top of the box. The pyramid occupies exactly 1/3 the volume of that box. So the volume of the pyramid is V = 1/3 * A * h. The base area A is 30 cm^2 and the altitude is 60 cm so we have V = 1/3 * 50 cm^2 * 60 cm = 1000 cm^3.
......!!!!!!!!...................................
RESPONSE --> I made another careless error by not dividing by 3. I understood the problem and should have gotten it correct. self critique assessment: 3
.................................................
......!!!!!!!!...................................
21:53:23 `q007. What is the volume of a cone whose base area is 20 square meters and whose altitude is 9 meters?
......!!!!!!!!...................................
RESPONSE --> V = (1/3) (pi)(r^2)(h) V = (1/3) (20m^2)(9m) V = 60 m^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
21:53:31 Just as the volume of a pyramid is 1/3 the volume of the 'box' that contains it, the volume of a cone is 1/3 the volume of the cylinder that contains it. Specifically, the cylinder that contains the cone has the base of the cone as its base and matches the altitude of the cone. So the volume of the cone is 1/3 A * h, where A is the area of the base and h is the altitude of the cone. In this case the base area and altitude are given, so the volume of the cone is V = 1/3 A * h = 1/3 * 20 m^2 * 9 m = 60 m^3.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
21:58:54 `q008. What is a volume of a sphere whose radius is 4 meters?
......!!!!!!!!...................................
RESPONSE --> Volume = (4/3)(pi)(r^3 Volume = (4/3)(3.14)(4m)^3 Volume = (4/3)(3.14)(64cm^3) Volume = (85.33cm^3)(3.14) Volume = 267.9362 cm^3 confidence assessment: 2
.................................................
......!!!!!!!!...................................
21:59:17 The volume of a sphere is V = 4/3 pi r^3, where r is the radius of the sphere. In this case r = 4 m so V = 4/3 pi * (4 m)^3 = 4/3 pi * 4^3 m^3 = 256/3 pi m^3.
......!!!!!!!!...................................
RESPONSE --> Understood self critique assessment: 3
.................................................
......!!!!!!!!...................................
22:07:50 `q009. What is the volume of a planet whose diameter is 14,000 km?
......!!!!!!!!...................................
RESPONSE --> volume of a sphere is (4/3)(Pi)(r^3) V = (4/3)(22/7)(7,000km^3) V = (88/21)(343,000,000,000km^3) V = (30,184,000,000,000km^3)/(21) V = 1,437,333,333,000 km^3 or V = 1.437333333 x 10 ^12 km^3 confidence assessment: 2
.................................................
......!!!!!!!!...................................
22:08:29 The planet is presumably a sphere, so to the extent that this is so the volume of this planet is V = 4/3 pi r^3, where r is the radius of the planet. The diameter of the planet is 14,000 km so the radius is half this, or 7,000 km. It follows that the volume of the planet is V = 4/3 pi r^3 = 4/3 pi * (7,000 km)^3 = 4/3 pi * 343,000,000,000 km^3 = 1,372,000,000,000 / 3 * pi km^3. This result can be approximated to an appropriate number of significant figures.
......!!!!!!!!...................................
RESPONSE --> Understood self critique assessment: 3
.................................................
......!!!!!!!!...................................
22:10:43 `q010. Summary Question 1: What basic principle do we apply to find the volume of a uniform cylinder of known dimensions?
......!!!!!!!!...................................
RESPONSE --> We calculate the area of the base. Then we find out the height of the cylinder. We multiply these to get the volume. confidence assessment: 3
.................................................
......!!!!!!!!...................................
22:11:08 The principle is that when the cross-section of an object is constant, its volume is V = A * h, where A is the cross-sectional area and h the altitude. Altitude is measure perpendicular to the cross-section.
......!!!!!!!!...................................
RESPONSE --> Understood self critique assessment: 2
.................................................
......!!!!!!!!...................................
22:14:00 `q011. Summary Question 2: What basic principle do we apply to find the volume of a pyramid or a cone?
......!!!!!!!!...................................
RESPONSE --> We must find the area of the base. This solid does not have a constant height. We notice that if the sides were all standing up that it will only make up 1/3 of the height that would be constant. So we multiply the area of the base times 1/3 the height. confidence assessment: 2
.................................................
......!!!!!!!!...................................
22:14:29 The volumes of these solids are each 1/3 the volume of the enclosing figure. Each volume can be expressed as V = 1/3 A * h, where A is the area of the base and h the altitude as measured perpendicular to the base.
......!!!!!!!!...................................
RESPONSE --> Understood self critique assessment: 2
.................................................
......!!!!!!!!...................................
22:15:11 `q012. Summary Question 3: What is the formula for the volume of a sphere?
......!!!!!!!!...................................
RESPONSE --> V = (4/3)(pi)(r^3) confidence assessment: 3
.................................................
......!!!!!!!!...................................
22:15:25 The volume of a sphere is V = 4/3 pi r^3, where r is the radius of the sphere.
......!!!!!!!!...................................
RESPONSE --> Understood self critique assessment: 3
.................................................
......!!!!!!!!...................................
22:16:31 `q013. Explain how you have organized your knowledge of the principles illustrated by the exercises in this assignment.
......!!!!!!!!...................................
RESPONSE --> These exercises helped me to visualize when to multiply by 4/3 or when to divide by 3 to get volumes of different solids. confidence assessment: 3
.................................................
UʷeOy assignment #006 006. Physics qa initial problems 08-18-2008
......!!!!!!!!...................................
17:26:48 `q001. There are two parts to this problem. Reason them out using common sense. If the speed of an automobile changes by 2 mph every second, then how long will it take the speedometer to move from the 20 mph mark to the 30 mph mark? Given the same rate of change of speed, if the speedometer initially reads 10 mph, what will it read 7 seconds later?
......!!!!!!!!...................................
RESPONSE --> If the initial speed is 20mph and it changes 2mph every second, then at 1 sec = 22 mph 2 sec = 24 mph 3 sec = 26 mph 4 sec = 28 mph 5 sec = 30 mph So it will take the speedometer 5 seconds to move from the 20 mph to the 30 mph mark. There is an easier way to get the answer: The interval the speedometer should move is 10 mph to get from 20 mph to 30 mph. Since it takes 1 second to move 2 mph, then you could use ratios and proportions to solve. (1 sec/2 mph) = (x /10 mph). Use cross multiplication and solve. The answer is 5 seconds Since the speedometer moves 2mph every second, then it should move 14 mph in 7 seconds. Since the speedometer initially reads 10 mph and you add 14 mph to that, you get 24 mph. confidence assessment: 3
.................................................
......!!!!!!!!...................................
17:27:10 It will take 5 seconds to complete the change. 30 mph - 20 mph = 10 mph change at 2 mph per second (i.e., 2 mph every second) implies 5 seconds to go from 20 mph to 30 mph Change in speed is 2 mph/second * 7 seconds = 14 mph Add this to the initial 10 mph and the speedometer now reads 24 mph.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
17:39:07 `q002. An automobile traveling down a hill passes a certain milepost traveling at a speed of 10 mph, and proceeds to coast to a certain lamppost further down the hill, with its speed increasing by 2 mph every second. The time required to reach the lamppost is 10 seconds. It then repeats the process, this time passing the milepost at a speed of 20 mph. Will the vehicle require more or less than 10 seconds to reach the lamppost? Since its initial speed was 10 mph greater than before, does it follow that its speed at the lamppost will be 10 mph greater than before?
......!!!!!!!!...................................
RESPONSE --> It will require less than 10 seconds because it is traveling faster. Yes, it would follow that its speed at the lamppost will be 10 mph greater than before because the speed is increasing at a constant rate of 2mph. confidence assessment: 1
.................................................
......!!!!!!!!...................................
17:40:42 If it starts coasting down the same section of road at 20 mph, and if velocity changes by the same amount every second, the automobile should always be traveling faster than if it started at 10 mph, and would therefore take less than 10 seconds. The conditions here specify equal distances, which implies less time on the second run. The key is that, as observed above, the automobile has less than 10 seconds to increase its speed. Since its speed is changing at the same rate as before and it has less time to change it will therefore change by less.
......!!!!!!!!...................................
RESPONSE --> I was not thinking in terms of same distance. The explanation was necessary. self critique assessment: 1
.................................................
......!!!!!!!!...................................
17:52:17 `q003. The following example shows how we can measure the rate at which an automobile speeds up: If an automobile speeds up from 30 mph to 50 mph as the second hand of a watch moves from the 12-second position to the 16-second position, and its speed changes by 20 mph in 4 seconds. This gives us an average rate of velocity change equal to 20 mph / 4 seconds = 5 mph / second. We wish to compare the rates at which two different automobiles increase their speed: Which automobile speeds up at the greater rate, one which speeds up from 20 mph to 30 mph in five seconds or one which speeds up from 40 mph to 90 mph in 20 seconds?
......!!!!!!!!...................................
RESPONSE --> An automobile which speeds up from 20 mph to 30 mph in 5 seconds has an average rate of velocity change equal to 10 mph / 5 sec = 2 mph / sec An automoblie which speeds up from 40 mph to 90 mph in twenty seconds has an averge rate of velocity change equal to 50 mph / 20 sec = 2.5 mph / sec So the automobile which speeds up from 40 mph to 90 mph in twenty seconds speeds up at the greater rate. confidence assessment: 3
.................................................
......!!!!!!!!...................................
17:52:45 The first automobile's speed changes from 20 mph to 30mph, a 10 mph difference, which occurs in 5 seconds. So the rate of chage in 10 mph / (5 sec) = 2 mph / sec. = rate of change of 2 mph per second. }{The second automobile's speed changes from 40 mph to 90 mph, a 50 mph difference in 20 seconds so the rate of change is 50 mph / (20 sec) = 2.5 mph per second. Therefore, the second auto is increasing its velocity ar a rate which is .5 mph / second greater than that of the first.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
18:05:06 4. If an automobile of mass 1200 kg is pulled by a net force of 1800 Newtons, then the number of Newtons per kg is 1800 / 1200 = 1.5. The rate at which an automobile speeds up is determined by the net number of Newtons per kg. Two teams pulling on ropes are competing to see which can most quickly accelerate their initially stationary automobile to 5 mph. One team exerts a net force of 3000 Newtons on a 1500 kg automobile while another exerts a net force of 5000 Newtons on a 2000 kg automobile. Which team will win and why? If someone pulled with a force of 500 Newtons in the opposite direction on the automobile predicted to win, would the other team then win?
......!!!!!!!!...................................
RESPONSE --> The team that exerted a net force of 3,000 Newtons on a 1,500 kg automobile: 3,000 Newtons/ 1,500 kg = 2 Newtons/kg The other team exerted a net force of 5,000 Newtons/2,000 kg = 2.5 Newtons / kg The team that exerted a net force of 5,000 Newtons on a 2,000 kg automobile. If a team pulled with a force of 500 Newtons in the opposite direction, then the net force would be 5,000 Newtons - 500 Newtons = 4,500 Newtons 4,500 Newtons / 2,000 kg = 2.25 Newtons/kg No, the other team still would not win. self critique assessment: 2
.................................................
......!!!!!!!!...................................
18:05:49 The first team's rate is 3000 Newtons divided by 1500 kg or 2 Newtons per kg, while the second team's rate is 5000 Newtons divided by 2000 kg or 2.5 Newtons per kg. The second team therefore increases velocity more quickly. Since both start at the same velocity, zero, the second team will immediately go ahead and will stay ahead. The second team would still win even if the first team was hampered by the 500 Newton resistance, because 5000 Newtons - 500 Newtons = 4500 Newtons of force divided by 2000 kg of car gives 2.25 Newtons per kg, still more than the 2 Newtons / kg of the first team
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
18:12:09 `q005. Both the mass and velocity of an object contribute to its effectiveness in a collision. If a 250-lb football player moving at 10 feet per second collides head-on with a 200-lb player moving at 20 feet per second in the opposite direction, which player do you precidt will be moving backward immediately after the collision, and why?
......!!!!!!!!...................................
RESPONSE --> The 250 lb player movting at 10 ft per sec has a force of 250 lb/10 sec = 25 lb/ft. The other play is 200 lb at 20 feet per second has a force of 200 lb/20 sec = 10 lb/ft. Thus, the 250 lb player has more force. Consequently, the 200 lb player will be moving backward immediately after the collision. confidence assessment: 2
.................................................
......!!!!!!!!...................................
18:13:23 Greater speed and greater mass both provide advantages. In this case the player with the greater mass has less speed, so we have to use some combination of speed and mass to arrive at a conclusion. It turns out that if we multiply speed by mass we get the determining quantity, which is called momentum. 250 lb * 10 ft/sec = 2500 lb ft / sec and 200 lb * 20 ft/sec = 4000 lb ft / sec, so the second player will dominate the collision. In this course we won't use pounds as units, and in a sense that will become apparent later on pounds aren't even valid units to use here. However that's a distinction we'll worry about when we come to it.
......!!!!!!!!...................................
RESPONSE --> The explanation was necessary. I got the right answer but was thinking incorrectly. self critique assessment: 1
.................................................
......!!!!!!!!...................................
18:19:26 `q006. Two climbers eat Cheerios for breakfast and then climb up a steep mountain as far as they can until they use up all their energy from the meal. All other things being equal, who should be able to climb further up the mountain, the 200-lb climber who has eaten 12 ounces of Cheerios or the 150-lb climber who has eaten 10 ounces of Cheerios?
......!!!!!!!!...................................
RESPONSE --> 200 lb/ 12 oz = 16 2/3 lb/oz 150 lb / 10 oz = 15 lb/oz The 150 lb climber is only having to carry 15 lb/oz and the 200 lb climber is having to carry 16 2/3 lb/oz So the 150 lb climber should be able to climb further up the mountain. confidence assessment: 0
.................................................
......!!!!!!!!...................................
18:20:32 The comparison we make here is the number of ounces of Cheerios per pound of body weight. We see that the first climber has 12 oz / (200 lb) = .06 oz / lb of weight, while the second has 10 0z / (150 lb) = .067 oz / lb. The second climber therefore has more energy per pound of body weight. It's the ounces of Cheerios that supply energy to lift the pounds of climber. The climber with the fewer pounds to lift for each ounce of energy-producing Cheerios will climb further.
......!!!!!!!!...................................
RESPONSE --> The correct answer for the wrong reason. self critique assessment: 1
.................................................
......!!!!!!!!...................................
18:23:49 `q007. Two automobiles are traveling up a long hill with an steepness that doesn't change until the top, which is very far away, is reached. One automobile is moving twice as fast as the other. At the instant the faster automobile overtakes the slower their drivers both take them out of gear and they coast until they stop. Which automobile will take longer to come to a stop? Will that automobile require about twice as long to stop, more than twice as long or less than twice as long? Which automobile will have the greater average coasting velocity? Will its average coasting velocity by twice as great as the other, more than twice as great or less than twice as great? Will the distance traveled by the faster automobile be equal to that of the slower, twice that of the slower or more than twice that of the slower?
......!!!!!!!!...................................
RESPONSE --> The automobile moving at the faster rate will take longer to stop because it has more momentum when it overtakes the slower one. It will take about twice as long to stop. confidence assessment: 1
.................................................
......!!!!!!!!...................................
18:24:27 It turns out that, neglecting air resistance, since the slope is the same for both, both automobiles will change velocity at the same rate. So in this case the second would require exactly twice as long. If you include air resistance the faster car experiences more so it actually takes a bit less than twice as long as the slower. For the same reasons as before, and because velocity would change at a constant rate (neglecting air resistance) it would be exactly twice as great if air resistance is neglected. Interestingly if it takes twice as much time and the average velocity is twice as great the faster car travels four times as far. If there is air resistance then it slows the faster car down more at the beginning than at the end and the average velocity will be a bit less than twice as great and the coasting distance less than four times as far.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 2
.................................................
......!!!!!!!!...................................
18:35:56 `q008. When a 100 lb person hangs from a certain bungee cord, the cord stretches by 5 feet beyond its initial unstretched length. When a person weighing 150 lbs hangs from the same cord, the cord is stretched by 9 feet beyond its initial unstretched length. When a person weighing 200 lbs hangs from the same cord, the cord is stretched by 12 feet beyond its initial unstretched length. Based on these figures, would you expect that a person of weight 125 lbs would stretch the cord more or less than 7 feet beyond its initial unstretched length?
......!!!!!!!!...................................
RESPONSE --> I think that a person of weight 125 lbs would stretch the cord more than 7 feet beyond its initial unstretched length. The rate that the cord stretches is not a constant rate. I think there is less resistance with the lighter person and the cord stretches more. confidence assessment: 0
.................................................
......!!!!!!!!...................................
18:37:01 From 100 lbs to 150 lbs the stretch increased by 4 feet, from 150 lbs to 200 lbs the increase was only 3 feet. Thus it appears that at least in the 100 lb - 200 lb rands each additional pound results in less increase in length than the last and that there would be more increase between 100 lb and 125 lb than between 125 lb and 150 lb. This leads to the conclusion that the stretch for 125 lb would be more than halfway from 5 ft to 9 ft, or more than 7 ft. A graph of stretch vs. weight would visually reveal the nature of the nonlinearity of this graph and would also show that the stretch at 125 lb must be more than 7 feet (the graph would be concave downward, or increasing at a decreasing rate, so the midway stretch would be higher than expected by a linear approximation).
......!!!!!!!!...................................
RESPONSE --> The right answer but the wrong explanation. self critique assessment: 1
.................................................
......!!!!!!!!...................................
18:44:36 `q009. When given a push of 10 pounds, with the push maintained through a distance of 4 feet, a certain ice skater can coast without further effort across level ice for a distance of 30 feet. When given a push of 20 pounds (double the previous push) through the same distance, the skater will be able to coast twice as far, a distance of 60 feet. When given a push of 10 pounds for a distance of 8 feet (twice the previous distance) the skater will again coast a distance of 60 feet. The same skater is now accelerated by a sort of a slingshot consisting of a bungee-type cord slung between two posts in the ice. The cord, as one might expect, exerts greater and greater force as it is pulled back further and further. Assume that the force increases in direct proportion to pullback (ie.g., twice the pullback implies twice the force). When the skater is pulled back 4 feet and released, she travels 20 feet. When she is pulled back 8 feet and released, will she be expected to travel twice as far, more than twice as far or less than twice as far as when she was pulled back 4 feet?
......!!!!!!!!...................................
RESPONSE --> Since twice the pull back inplies twice the force, the skater will be expected to travel twice as far. confidence assessment: 0
.................................................
......!!!!!!!!...................................
18:45:24 The distance through which the force acts will be twice as great, which alone would double the distance; because of the doubled pullback and the linear proportionality relationship for the force the average force is also twice as great, which alone would double the distance. So we have to double the doubling; she will go 4 times as far
......!!!!!!!!...................................
RESPONSE --> I did not get this one right. self critique assessment: 1
.................................................
......!!!!!!!!...................................
18:47:30 `q010. Two identical light bulbs are placed at the centers of large and identically frosted glass spheres, one of diameter 1 foot and the other of diameter 2 feet. To a moth seeking light from half a mile away, unable to distinguish the difference in size between the spheres, will the larger sphere appear brighter, dimmer or of the same brightness as the first? To a small moth walking on the surface of the spheres, able to detect from there only the light coming from 1 square inch of the sphere, will the second sphere appear to have the same brightness as the first, twice the brightness of the first, half the brightness of the first, more than twice the brightness of the first, or less than half the brightness of the first?
......!!!!!!!!...................................
RESPONSE --> The larger sphere will appear brighter. It will appear to have the same. confidence assessment: 0
.................................................
......!!!!!!!!...................................
18:48:11 Both bulbs send out the same energy per second. The surface of the second bulb will indeed be dimmer than the first, as we will see below. However the same total energy per second reaches the eye (identically frosted bulbs will dissipate the same percent of the bulb energy) and from a great distance you can't tell the difference in size, so both will appear the same. The second sphere, while not as bright at its surface because it has proportionally more area, does have the extra area, and that exactly compensates for the difference in brightness. Specifically the brightness at the surface will be 1/4 as great (twice the radius implies 4 times the area which results in 1/4 the illumination at the surface) but there will be 4 times the surface area. Just as a 2' x 2' square has four times the area of a 1' x 1' square, a sphere with twice the diameter will have four times the surface area and will appear 1 / 4 as bright at its surface. Putting it another way, the second sphere distributes the intensity over four times the area, so the light on 1 square inch has only 1 / 4 the illumination.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 0
.................................................
......!!!!!!!!...................................
18:51:24 `q011. The water in a small container is frozen in a freezer until its temperature reaches -20 Celsius. The container is then placed in a microwave oven, which proceeds to deliver energy at a constant rate of 600 Joules per second. After 10 seconds the ice is still solid and its temperature is -1 Celsius. After another 10 seconds a little bit of the cube is melted and the temperature is 0 Celsius. After another minute most of the ice is melted but there is still a good bit of ice left, and the ice and water combination is still at 0 Celsius. After another minute all the ice is melted and the temperature of the water has risen to 40 degrees Celsius. Place the following in order, from the one requiring the least energy to the one requiring the most: Increasing the temperature of the ice by 20 degrees to reach its melting point. Melting the ice at its melting point. Increasing the temperature of the water by 20 degrees after all the ice melted. At what temperature does it appear ice melts, and what is the evidence for your conclusion?
......!!!!!!!!...................................
RESPONSE --> Melting the ice at its melting point Increasing the temp. of the water by 20 degrees after all the ice melted. Increasing the temp of the ice by 20 degrees to reach its melting point. confidence assessment: 0
.................................................
......!!!!!!!!...................................
18:52:30 Since the temperature is the same when a little of the ice is melted as when most of it is melted, melting takes place at this temperature, which is 0 Celsius. The time required to melt the ice is greater than any of the other times so melting at 0 C takes the most energy. Since we don't know how much ice remains unmelted before the final minute, it is impossible to distinguish between the other two quantities, but it turns out that it takes less energy to increase the temperature of ice than of liquid water.
......!!!!!!!!...................................
RESPONSE --> ??????? self critique assessment: 0
.................................................
......!!!!!!!!...................................
18:54:42 `q012. Suppose you are in the center of a long, narrow swimming pool (e.g., a lap pool). Two friends with kickboards are using them to push waves in your direction. Their pushes are synchronized, and the crests of the waves are six feet apart as they travel toward you, with a 'valley' between each pair of crests. Since your friends are at equal distances from you the crests from both directions always reach you at the same instant, so every time the crests reach you the waves combine to create a larger crest. Similarly when the valleys meet you experience a larger valley, and as a result you bob up and down further than you would if just one person was pushing waves at you. Now if you move a bit closer to one end of the pool the peak from that end will reach you a bit earlier, and the peak from the other end will reach you a little later. So the peaks won't quite be reaching you simultaneously, nor will the valleys, and you won't bob up and down as much. If you move far enough, in fact, the peak from one end will reach you at the same time as the valley from the other end and the peak will 'fll in' the valley, with the result that you won't bob up and down very much. If the peaks of the approaching waves are each 6 inches high, how far would you expect to bob up and down when you are at the center point? How far would you have to move toward one end or the other in order for peaks to meet valleys, placing you in relatively calm water?
......!!!!!!!!...................................
RESPONSE --> None. ???? confidence assessment: 0
.................................................
......!!!!!!!!...................................
18:55:35 If the two 6-inch peaks meet and reinforce one another completely, the height of the 'combined' peak will be 6 in + 6 in = 12 in. If for example you move 3 ft closer to one end you move 3 ft further from the other and peaks, which are 6 ft apart, will still be meeting peaks. [ Think of it this way: If you move 3 ft closer to one end you move 3 ft further from the other. This shifts your relative position to the two waves by 6 feet (3 feet closer to the one you're moving toward, 3 feet further from the other). So if you were meeting peaks at the original position, someone at your new position would at the same time be meeting valleys, with two peaks closing in from opposite directions. A short time later the two peaks would meet at that point. ] However if you move 1.5 ft the net 'shift' will be 3 ft and peaks will be meeting valleys so you will be in the calmest water.
......!!!!!!!!...................................
RESPONSE --> ??????? self critique assessment: 0
.................................................
nyzSإzʋ assignment #001 001. Rates qa rates 08-18-2008
......!!!!!!!!...................................
19:08:12 `q001. You should copy and paste these instructions to a word processor for reference. However you can always view them, as well as everything else that has appeared in this box, by clicking the 'Display Everything' button. 1. For the next question or answer, you click on 'Next Question / Answer' button above the box at top left until a question has been posed. Once a question has been posed you are to answer before you click again on this button. 2. Before clicking for an answer, type your best answer to the current question into the box to the right, then clip on the 'Enter Answer' button. 3. After entering your answer you will click on 'Next Question / Answer' to view the answer to the question. Do not tamper with the information displayed in the left-hand box. 4. If your answer was incorrect, incomplete or would otherwise require revision, you will enter a self-critique. If you learned something from the answer, you need to restate it in your own words in order to reinforce your learning. If there is something you feel you should note for future reference, you should make a note in your own words. Go to the response box (the right-hand box) and type in a self-critique and/or notes, as appropriate. Do not copy and paste anything from the left-hand box, since that information will be saved in any case. 5. If you wish to save your response to your Notes file you may choose to click on the 'Save As Notes' button rather than the 'Enter Answer' button. Doing so will save your work for your future reference. Your work will be saved in a Notes file in the c:\vhmthphy folder. The title of the Notes file will also include the name you gave when you started the program. 6. After clicking either the 'Enter Response' or the 'Save as Notes' button, click on 'Next Question / Answer' and proceed in a similar manner. In the right-hand box briefly describe your understanding of these instructions, then click 'Enter Answer'.
......!!!!!!!!...................................
RESPONSE --> Note: I do not see a ""Display Everything"" button. The third button looks messed up...I cannot tell what it says it is. I should copy and paste these instructions to a word processor. Click on next question to get a new question to pop up. I should answer that question in the right box before looking at the answer. I click on enter response to record my answer. Do not tamper with the information in the left box. If my answer is incorrect, incomplete or requires revision, I need to enter a self-critique. If I learned something from the answer, I should note it. If I want my response in my Notes file, I click on the Save As Notes button. I then click on the next question button and proceed in the same manner. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:08:44 Your answer has been noted. Enter 'ok' in the Response Box and click on Enter Response, then click on Next Question/Answer for the first real question.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:09:43 `q002. Note that there are 10 questions in this assignment. The questions are of increasing difficulty--the first questions are fairly easy but later questions are very tricky. The main purposes of these exercises are to refine your thinking about rates, and to see how you process challenging information. Continue as far as you can until you are completely lost. Students who are prepared for the highest-level math courses might not ever get lost. If you make $50 in 5 hr, then at what rate are you earning money?
......!!!!!!!!...................................
RESPONSE --> 50 $ / 5 hr = 10 $/ hr confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:10:19 The rate at which you are earning money is the number of dollars per hour you are earning. You are earning money at the rate of 50 dollars / (5 hours) = 10 dollars / hour. It is very likely that you immediately came up with the $10 / hour because almosteveryone is familiar with the concept of the pay rate, the number of dollars per hour. Note carefully that the pay rate is found by dividing the quantity earned by the time required to earn it. Time rates in general are found by dividing an accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> Understood. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:11:17 `q003.If you make $60,000 per year then how much do you make per month?
......!!!!!!!!...................................
RESPONSE --> 60,000 $ / 12 mth = 5,000 $ / mth confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:11:45 Most people will very quickly see that we need to divide $60,000 by 12 months, giving us 60,000 dollars / (12 months) = 5000 dollars / month. Note that again we have found a time rate, dividing the accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> Understood. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:13:00 `q004. Suppose that the $60,000 is made in a year by a small business. Would be more appropriate to say that the business makes $5000 per month, or that the business makes an average of $5000 per month?
......!!!!!!!!...................................
RESPONSE --> The business makes an average of 5,000 $ / mth We only know what it made the entire year. So we are only giving an average. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:13:24 Small businesses do not usually make the same amount of money every month. The amount made depends on the demand for the services or commodities provided by the business, and there are often seasonal fluctuations in addition to other market fluctuations. It is almost certain that a small business making $60,000 per year will make more than $5000 in some months and less than $5000 in others. Therefore it is much more appropriate to say that the business makes and average of $5000 per month. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> Understood. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:15:50 `q005. If you travel 300 miles in 6 hours, at what average rate are you covering distance, and why do we say average rate instead of just plain rate?
......!!!!!!!!...................................
RESPONSE --> While traveling, the speeds are at different rates because of traffic conditions, interstate vs. state routes, and etc. 300 mi/ 6 hr = 50 mi/hr We are looking at the total distance, so we can only say what the average is. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:16:20 The average rate is 50 miles per hour, or 50 miles / hour. This is obtained by dividing the accumulated quantity, the 300 miles, by the time required to accumulate it, obtaining ave rate = 300 miles / ( 6 hours) = 50 miles / hour. Note that the rate at which distance is covered is called speed. The car has an average speed of 50 miles/hour. We say 'average rate' in this case because it is almost certain that slight changes in pressure on the accelerator, traffic conditions and other factors ensure that the speed will sometimes be greater than 50 miles/hour and sometimes less than 50 miles/hour; the 50 miles/hour we obtain from the given information is clearly and overall average of the velocities. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> Understood. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:18:09 `q006. If you use 60 gallons of gasoline on a 1200 mile trip, then at what average rate are you using gasoline, with respect to miles traveled?
......!!!!!!!!...................................
RESPONSE --> 1200 mi/ 60 gal = 20 mi/gal confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:19:32 08-18-2008 19:19:32 The rate of change of one quantity with respect to another is the change in the first quantity, divided by the change in the second. As in previous examples, we found the rate at which money was made with respect to time by dividing the amount of money made by the time required to make it. By analogy, the rate at which we use fuel with respect to miles traveled is the change in the amount of fuel divided by the number of miles traveled. In this case we use 60 gallons of fuel in 1200 miles, so the average rate it 60 gal / (1200 miles) = .05 gallons / mile. Note that this question didn't ask for miles per gallon. Miles per gallon is an appropriate and common calculation, but it measures the rate at which miles are covered with respect to the amount of fuel used. Be sure you see the difference. Note that in this problem we again have here an example of a rate, but unlike previous instances this rate is not calculated with respect to time. This rate is calculated with respect to the amount of fuel used. We divide the accumulated quantity, in this case miles, by the amount of fuel required to cover those miles. Note that again we call the result of this problem an average rate because there are always at least subtle differences in driving conditions that require the use of more fuel on some miles than on others. It's very important to understand the phrase 'with respect to'. Whether the calculation makes sense or not, it is defined by the order of the terms. In this case gallons / mile tells you how many gallons you are burning, on the average, per mile. This concept is not as familiar as miles / gallon, but except for familiarity it's technically no more difficult. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
NOTES -------> I inverted the miles and the gallons.
.......................................................!!!!!!!!...................................
19:20:12 `q007. The word 'average' generally connotes something like adding two quantities and dividing by 2, or adding several quantities and dividing by the number of quantities we added. Why is it that we are calculating average rates but we aren't adding anything?
......!!!!!!!!...................................
RESPONSE --> We are already given the totals, so we aren't having to add anything. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:20:51 The word 'average' in the context of the dollars / month, miles / gallon types of questions we have been answering was used because we expect that in different months different amounts were earned, or that over different parts of the trip the gas mileage might have varied, but that if we knew all the individual quantities (e.g., the dollars earned each month, the number of gallons used with each mile) and averaged them in the usual manner, we would get the .05 gallons / mile, or the $5000 / month. In a sense we have already added up all the dollars earned in each month, or the miles traveled on each gallon, and we have obtained the total $60,000 or 1200 miles. Thus when we divide by the number of months or the number of gallons, we are in fact calculating an average rate. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> Understood. confidence assessment: 3
.................................................
......!!!!!!!!...................................
19:24:44 `q008. In a study of how lifting strength is influenced by various ways of training, a study group was divided into 2 subgroups of equally matched individuals. The first group did 10 pushups per day for a year and the second group did 50 pushups per day for year. At the end of the year to lifting strength of the first group averaged 147 pounds, while that of the second group averaged 162 pounds. At what average rate did lifting strength increase per daily pushup?
......!!!!!!!!...................................
RESPONSE --> 2.23 lbs/day confidence assessment: 0
.................................................
......!!!!!!!!...................................
19:26:28 08-18-2008 19:26:28 The second group had 15 pounds more lifting strength as a result of doing 40 more daily pushups than the first. The desired rate is therefore 15 pounds / 40 pushups = .375 pounds / pushup. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
NOTES -------> I should have looked at the difference of the two groups for the number of pounds and the number of pushups. Then dividing 15 lb/40 PU would give me .375 lbs/PU
.......................................................!!!!!!!!...................................
21:05:16 `q009. In another part of the study, participants all did 30 pushups per day, but one group did pushups with a 10-pound weight on their shoulders while the other used a 30-pound weight. At the end of the study, the first group had an average lifting strength of 171 pounds, while the second had an average lifting strength of 188 pounds. At what average rate did lifting strength increase with respect to the added shoulder weight?
......!!!!!!!!...................................
RESPONSE --> 30 PU - 10 PU = 20 PU 188 lb - 171 lb = 17 lb 20 PU/17 lb = 1.17 PU/lb confidence assessment: 0
.................................................
......!!!!!!!!...................................
21:06:32 The difference in lifting strength was 17 pounds, as a result of a 20 pound difference in added weight. The average rate at which strength increases with respect added weight would therefore be 17 lifting pounds / (20 added pounds) = .85 lifting pounds / added pound. The strength advantage was .85 lifting pounds per pound of added weight, on the average. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> with respect to the added weight....I should have put the added weight in the denominator. confidence assessment:
.................................................
......!!!!!!!!...................................
21:09:10 `q010. During a race, a runner passes the 100-meter mark 12 seconds after the start and the 200-meter mark 22 seconds after the start. At what average rate was the runner covering distance between those two positions?
......!!!!!!!!...................................
RESPONSE --> 200 m - 100 m = 100 m 22 sec - 12 sec = 10 sec 100m/10sec = 10 m / sec confidence assessment: 2
.................................................
......!!!!!!!!...................................
21:09:36 The runner traveled 100 meters between the two positions, and required 10 seconds to do so. The average rate at which the runner was covering distance was therefore 100 meters / (10 seconds) = 10 meters / second. Again this is an average rate; at different positions in his stride the runner would clearly be traveling at slightly different speeds. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> Understood confidence assessment: 3
.................................................
......!!!!!!!!...................................
21:16:40 `q011. During a race, a runner passes the 100-meter mark moving at 10 meters / second, and the 200-meter mark moving at 9 meters / second. What is your best estimate of how long it takes the runner to cover the 100 meter distance?
......!!!!!!!!...................................
RESPONSE --> It takes 10 seconds to cover the first 100 yards. It takes 11.1 seconds to cover the next 100 yards. (10 sec + 11.1 sec)/2 = 10.5 sec confidence assessment: 1
.................................................
......!!!!!!!!...................................
21:18:34 At 10 meters/sec, the runner would require 10 seconds to travel 100 meters. However the runner seems to be slowing, and will therefore require more than 10 seconds to travel the 100 meters. We don't know what the runner's average speed is, we only know that it goes from 10 m/s to 9 m/s. The simplest estimate we could make would be that the average speed is the average of 10 m/s and 9 m/s, or (10 m/s + 9 m/s ) / 2 = 9.5 m/s. Taking this approximation as the average rate, the time required to travel 100 meters will be (100 meters) / (9.5 m/s) = 10.5 sec, approx.. Note that simply averaging the 10 m/s and the 9 m/s might not be the best way to approximate the average rate--for example we if we knew enough about the situation we might expect that this runner would maintain the 10 m/s for most of the remaining 100 meters, and simply tire during the last few seconds. However we were not given this information, and we don't add extraneous assumptions without good cause. So the approximation we used here is pretty close to the best we can do with the given information. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
21:19:18 `q012. We just averaged two quantities, adding them in dividing by 2, to find an average rate. We didn't do that before. Why we do it now?
......!!!!!!!!...................................
RESPONSE --> We already had the rates so all we had to do was average the rates. confidence assessment: 1
.................................................
......!!!!!!!!...................................
21:19:44 In previous examples the quantities weren't rates. We were given the amount of change of some accumulating quantity, and the change in time or in some other quantity on which the first was dependent (e.g., dollars and months, miles and gallons). Here we are given 2 rates, 10 m/s and 9 m/s, in a situation where we need an average rate in order to answer a question. Within this context, averaging the 2 rates was an appropriate tactic. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> Understood confidence assessment: 2
.................................................
"