#$&* course PHY 201 9:45 PM EST on 02/04/13
.............................................
Given Solution: The velocity of the object changes from 5 meters/second to 25 meters/second so the change in velocity is 20 meters/second. The average acceleration is therefore (20 meters/second) / (4 seconds) = 5 m / s^2. The average velocity of the object is the average of its initial and final velocities, as asserted above, and is therefore equal to (5 meters/second + 25 meters/second) / 2 = 15 meters/second (note that two numbers are averaged by adding them and dividing by 2). &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q002. How far does the object of the preceding problem travel in the 4 seconds? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: 'ds = vAve * 'dt = 15 m/s * 4 s = 60 m confidence rating #$&*:8232; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The displacement `ds of the object is the product vAve `dt of its average velocity and the time interval, so this object travels 15 m/s * 4 s = 60 meters during the 4-second time interval. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q003. Explain in commonsense terms how we determine the acceleration and distance traveled if we know the initial velocity v0, and final velocity vf and the time interval `dt. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: Average acceleration is the rate of change of velocity divided by the rate of change in time and will give you the units of distance per time per time. The change of velocity is the initial velocity subtracted from the final velocity. The distance traveled is the average velocity multiplied by the change in time to give you distance (length) units, i.e., meters, yards, kilometers, inches, miles, etc. confidence rating #$&*:#8232; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: In commonsense terms, we find the change in velocity since we know the initial and final velocities, and we know the time interval, so we can easily calculate the acceleration. Again since we know initial and final velocities we can easily calculate the average velocity, and since we know the time interval we can now determine the distance traveled. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q004. Symbolize the situation by first giving the expression for the acceleration in terms of v0, vf and `dt, then by giving the expression for vAve in terms of v0 and vf, and finally by giving the expression for the displacement in terms of v0, vf and `dt. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: aAve = (vf - v0) / 'dt vAve = (v0 + vf) / 2 'ds = (vf - v0)/2 * 'dt confidence rating #$&*:#8232; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The acceleration is equal to the change in velocity divided by the time interval; since the change in velocity is vf - v0 we see that the acceleration is a = ( vf - v0 ) / `dt. The average velocity is the average of the initial and final velocities, which is expressed as (vf + v0) / 2. When this average velocity is multiplied by `dt we get the displacement, which is `ds = (v0 + vf) / 2 * `dt. STUDENT SOLUTION (mostly but not completely correct) vAve = (vf + v0) / 2aAve = (vf-v0) / dtdisplacement = (vf + v0)/dt INSTRUCTOR RESPONSE Displacement = (vf + v0)/dt is clearly not correct, since greater `dt implies greater displacement. Dividing by `dt would give you a smaller result for larger `dt. From the definition vAve = `ds / `dt, so the displacement must be `ds = vAve * `dt. Using your correct expression for vAve you get the correct expression for `ds. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q006. This situation is identical to the previous, and the conditions implied by uniformly accelerated motion are repeated here for your review: If the acceleration of an object is uniform, then the following statements apply: 1. A graph of velocity vs. clock time forms a straight line, either level or increasing at a constant rate or decreasing at a constant rate. 2. The average velocity of the object over any time interval is equal to the average of its velocity at the beginning of the time interval (called its initial velocity) and its velocity at the end of the time interval (called its final velocity). 3. The velocity of the object changes at a constant rate (this third statement being obvious since the rate at which the velocity changes is the acceleration, which is assumed here to be constant). 4. The acceleration of the object at every instant is equal to the average acceleration of the object. Describe a graph of velocity vs. clock time, assuming that the initial velocity occurs at clock time t = 0. At what clock time is the final velocity then attained? What are the coordinates of the point on the graph corresponding to the initial velocity (hint: the t coordinate is 0, as specified here; what is the v coordinate at this clock time? i.e., what is the velocity when t = 0?). What are the coordinates of the point corresponding to the final velocity? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: at t = 0, the initial velocity is 5 m/s. At t = 4 s, the final velocity is 25 m/s. There is a straight line that is increasing at a constant rate from the point (0 s, 5 m/s) and (4 s, 25 m/s). The final velocity (vf) is attained at t = 4 seconds. Again, the initial velocity (v0) is 5 m/s. confidence rating #$&*:8232; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The initial velocity of 5 m/s occurs at t = 0 s so the corresponding graph point is (0 s, 5 m/s). The final velocity of 25 meters/second occurs after a time interval of `dt = 4 seconds; since the time interval began at t = 0 sec it ends at at t = 4 seconds and the corresponding graph point is ( 4 s, 25 m/s). &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q007. Is the v vs. t graph increasing, decreasing or level between the two points, and if increasing or decreasing is the increase or decrease at a constant, increasing or decreasing rate? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The line is increasing at a constant rate between the initial and final velocity points. This means the line between these two points is a straight line. confidence rating #$&*:32; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: Since the acceleration is uniform, the graph is a straight line. The graph therefore increases at a constant rate from the point (0, 5 m/s) to the point (4 s, 25 m/s). &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q008. What is the slope of the graph between the two given points, and what is the meaning of this slope? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The slope of this graph represents the average acceleration, aAve. The slope of the graph represents rise over run. Rise represents the change in velocity and the run represents the time interval. Rise = 25 m/s - 5 m/s = 20 m/s, Run = 4 s - 0 s = 4 s, therefore, slope = 20 m/s / 4 s = 5 m/s/s = 5 m/s^2 confidence rating #$&*:#8232; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The rise of the graph is from 5 m/s to 25 m/s and is therefore 20 meters/second, which represents the change in the velocity of the object. The run of the graph is from 0 seconds to 4 seconds, and is therefore 4 seconds, which represents the time interval during which the velocity changes. The slope of the graph is rise / run = ( 20 m/s ) / (4 s) = 5 m/s^2, which represents the change `dv in the velocity divided by the change `dt in the clock time and therefore represents the acceleration of the object. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q009. The graph forms a trapezoid, starting from the point (0,0), rising to the point (0,5 m/s), then sloping upward to (4 s, 25 m/s), then descending to the point (4 s, 0) and returning to the origin (0,0). This trapezoid has two altitudes, 5 m/s on the left and 25 m/s on the right, and a base which represents a width of 4 seconds. What is the average altitude of the trapezoid and what does it represent, and what is the area of the trapezoid and what does it represent? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The average altitude is 5 m/s + 25 m/s divided by 2 = 15 m/s and represents the average velocity. Area of the trapezoid equals the base times the height which is 15 m/s * 4 s which equals 60 m. This area represents the change position (displacement). confidence rating #$&*:8232; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The two altitudes are 5 meters/second and 25 meters/second, and their average is 15 meters/second. This represents the average velocity of the object on the time interval. The area of the trapezoid is equal to the product of the average altitude and the base, which is 15 m/s * 4 s = 60 meters. This represents the product of the average velocity and the time interval, which is the displacement during the time interval. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q010. Students at this point often need more practice identifying which of the quantities v0, vf, vAve, `dv, a, `ds and `dt are known in a situation or problem. You should consider running through the optional supplemental exercise ph1_qa_identifying_quantities.htm . The detailed URL is http://vhcc2.vhcc.edu/dsmith/genInfo/qa_query_etc/ph1/ph1_qa_identifying_quantities.htm If you are able to quickly identify all the quantities correctly 'in your head', the exercise won't take long and it won't be necessary to type in any responses or submit anything. If you aren't sure of some of the answers, you can submit the document, answer and/or asking questions on only the problems of which you are unsure. You should take a quick look at this document. Answer below by describing what you see and indicating whether or not you think you already understand how to identify the quantities. If you are not very sure you are able to do this reliably, indicate how you have noted this link for future reference. If you intend to submit all or part of the document, indicate this as well. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: There are a total of nine questions under this document. The first question relates vf = v0 + a * 'dt. I feel confident that I am able to identify the quantities v0, vf, vAve, 'dv, a, 'ds, and 'dt with little to no problems. I will no be completing this proposed exercise. confidence rating #$&*:8232; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: You should have responded in such a way that the instructor understands that you are aware of this document, have taken appropriate steps to note its potential usefulness, and know where to find it if you need it. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: `q011. The velocity of a car changes uniformly from 5 m/s to 25 m/s during an interval that lasts 6 seconds. Show in detail how to reason out how far it travels. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: The average velocity (vAve) is the initial velocity added to the final velocity, (vf - v0) and divided by two; vAve = 15 m/s. The time interval is 6 seconds. The change in position is found by multiplying the average velocity (vAve) by the time interval ('dt). The units for time will cancel out and the units of distance will be left. vAve = 'ds / 'dt => 'ds = vAve * 'dt 'ds = 15 m/s * 6 s = 90 m confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ********************************************* Question: `q012. The points (5 s, 10 m/s) and (10 s, 20 m/s) define a 'graph trapezoid' on a graph of velocity vs. clock time. What is the average 'graph altitude' for this trapezoid? Explain what the average 'graph altitude' means and why it has this meaning. What is the area of this trapezoid? Explain thoroughly how you reason out this result, and be sure to include and explain your units. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: the average altitude is (20 m/s + 10 m/s) / 2 = 15 m/s. The average graph altitude represents the average velocity vAve. It is the sum of the initial and final velocities divided by 2. This is how you find vAve for object that don't start from rest. The area of the trapezoid is 75 m (15 m/s * 5 s). The area of a trapezoid is altitude divided by 2 and then multiplied by the width (base). confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ********************************************* Question: `q013. On a certain interval of duration `dt an object has initial velocity v_0 and final velocity v_f. In terms of the symbols v_0, v_f and `dt, what are the values of the following? • vAve • `dv • `ds • aAve Be sure to explain your reasoning. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: vAve = (v0 + vf) / 2 'dv = vf - v0 'ds = (vf - v0) * 'dt aAve = (vf - v0) / 'dt