#$&* course Phy 122 If your solution to stated problem does not match the given solution, you should self-critique per instructions athttp://vhcc2.vhcc.edu/dsmith/geninfo/labrynth_created_fall_05/levl1_22/levl2_81/file3_259.htm
.............................................
Given Solution: ** The change in thethermal energy of an isolated system is 0. So assuming that the systems are isolated the thermal energy change of one object is equal and opposite to that of the other. For an ideal substance the change in the thermal energy of an object is directly proportional to the change in its temperature and to its mass (i.e., more mass and more change in temperature implies more change in thermal energy). The specific heat is the proportionality constant for the substance. Using `dQ for the change in the thermal energy of an object we can express this as `dQ = mass * specific heat * `dT. (General College and University Physics students note that most substances do not quite behave in this ideal fashion; for most substances the specific heat is not in fact strictly constant and for most substances changes with temperature.) For two objects combined in a closed system we have `dQ1 + `dQ2 = 0, which gives us the equation m1 c1 `dT1 + m2 c2 `dT2 = 0 or equivalently m1 c1 `dT1 = - m2 c2 `dT2. That is, whatever energy one substance loses, the other gains. In this situation we know the specific heat of water, the two temperature changes and the two masses. We can therefore solve this equation for specific heat c2 of the unknown substance. ** Your Self-Critique: Ok Your Self-Critique Rating: Ok ********************************************* Question: prin phy Ch 13.26. Kelvin temperatures corresponding to 86 C, 78 F, -100 C, 5500 C and -459 F. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your Solution: The Kelvin temperature is 273 K higher than the Celsius temperature. (86 + 273) K = 359 K -100 + 273 K = 173 K (5500 + 273) K = 5773 K. 78 F is (78 F - 32 F) = 46 F above the freezing point of water. 46 Fahrenheit degrees is the same as (5/9 C / F) * 46 F = 26 C above freezing. Since freezing is at 0 C, this means that the temperature is 26 C. (26 + 273) K = 299 K. -459 F is (459 + 32) F = 491 F below freezing, or (5/9 C / F) * (-491 F) = 273 C below freezing. This is -273 C or (-273 + 273) K = 0 K. This is absolute zero, to the nearest degree. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The Kelvin temperature is 273 K higher than the Celsius temperature (actually 273.15 below, but the degree of precision in the given temperatures is not sufficient to merit consideration of tenths or hundredths of a degree). 86 C, -100 C and 5500 C are therefore equivalent to ( 86 + 273 ) K = 359 K, -100 + 273 K = 173 K, (5500 + 273) K = 5773 K. The freezing point ofwater is 0 C or 32 F, and a Fahrenheit degree is 5/9 the size of a Celsius degree. Therefore 78 F is (78 F - 32 F) = 46 F above the freezing point of water. 46 Fahrenheit degrees is the same as (5/9 C / F ) * 46 F = 26 C above freezing. Since freezing is at 0 C, this means that the temperature is 26 C. The Kelvin temperature is therefore (26 + 273) K = 299 K. Similar reasoning can be used to convert -459 F to Celsius -459 F is (459 + 32) F = 491 F below freezing, or (5/9 C / F) * (-491 F) = 273 C below freezing. This is -273 C or (-273 + 273) K = 0 K. This is absolute zero, to the nearest degree. Your Self-Critique: Ok Your Self-Critique Rating: Ok ********************************************* Question: prin phy and gen phy Ch 13.30 air at 20 C is compressed to 1/9 of its original volume. Estimate the temperature of the compressed air assuming the pressure reaches 40 atm. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your Solution: If the air was compressed to 1/9 its original volume and the temperature didnt change, it would end up with 9 times its original pressure. However the pressure changes from 1 atm to 40 atm, which is a 40-fold increase. The only way the pressure could end up at 40 times the original pressure, as opposed to 9 times the original, would be to heat up. Its absolute temperature would therefore have to rise by a factor of 40 / 9. Its original temperature was 20 C = 293 K, so the final temperature would be 293 K * 40/9, or over 1300 K. Now we reason in terms of the ideal gas law. P V = n R T. In this situation the number of moles n of the gas remains constant. Thus P V / T = n R, which is constant, and thus P1 V1 / T1 = P2 V2 /T2. The final temperature T2 is T2 = (P2 / P1) * (V2 / V1) * T1. From the given information P2 / P1 = 40 and V2 / V1 = 1/9 so T2 = 40 * 1/9 * T1. The original temperature is 20 C = 293 K so that T1 = 293 K, and we get T2 = 40 * 1/9 * 293 K. confidence rating #$&*: 3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: First we reason this out intuitively: If the air was compressed to 1/9 its original volume and thetemperature didnt change, it would end up with 9 times its original pressure. However the pressure changes from 1 atm to 40 atm, which is a 40-fold increase. The only way the pressure could end up at 40 times the original pressure, as opposed to 9 times the original, would be to heat up. Its absolute temperature would therefore have to rise by a factor of 40 / 9. Its original temperature was 20 C = 293 K, so the final temperature would be 293 K * 40/9, or over 1300 K. Now we reason in terms of the ideal gas law. P V = n R T. In this situation the number of moles n of the gas remains constant. Thus P V / T = n R, which is constant, and thus P1 V1 / T1 = P2 V2 /T2. The final temperature T2 is therefore T2 = (P2 / P1) * (V2 / V1) * T1. From the given information P2 / P1 = 40 and V2 / V1 = 1/9 so T2 = 40 * 1/9 * T1. The original temperature is 20 C = 293 K so that T1 = 293 K, and we get T2 = 40 * 1/9 * 293 K, the same result as before. Your Self-Critique: Ok Your Self-Critique Rating: Ok ********************************************* Question: query gen phy ch 13.38 fraction of air released after tire temp increases from 15 to 38 C at 220 kPa gauge YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your Solution: confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: (Note that the given 220 kPa initial gauge pressure implies an absolute pressure of 311 k Pa; assuming atmospheric pressure of about 101 k Pa, we add this to the gauge pressure to get absolute pressure). Remember that the gas laws are stated in terms of absolute temperature and pressure. The gas goes through three states. The temperature and pressure change between the first and second states, leaving the volume and the number n of moles constant. Between the second and third states pressure returns to its original value while volume remains constant and the number n of moles decreases. From the first state to the second: T1 = 288 K, T2 = 311 K so T2 / T1 = 311 / 288 = 1.08, approx. This is approx. an 8% increase in temperature. The pressure must therefore rise to P2 = 3ll / 288 * 321 kPa = 346 kPa, approx (note that we have to use actual rather than gauge pressure so init pressure is 220 kPa + 101 kPa = 321 kPa, approx. ) From the second state to the third, pressure is then released by releasing some gas, changing the number n of moles of gas in order to get pressure back to 331 kPa. Thus n3 / n2 = P3 / P2 = 321 kPa / 346 kPa or approximately .93, which would be about a 7% decrease. So we have to release about 7% of the air. Note that these calculations have been done mentally, and they might not be particularly accurate. Work out the process to botain the accurate numerical results. Note also that temperature changes from the second to third state were not mentioned in the problem. We would in fact expect a temperature change to accompany the release of the air, but this applies only to the air that escapes. The air left in the tire would probably change temperature for one reason or another, but it wouldn't do so as a direct result of releasing the air. STUDENT QUESTION It seems that the air goes from 288 to 311 K, so the ratio should be n2 / n1 = 288 / 311 and the proportional loss should be about (1 - 288 / 311) INSTRUCTOR RESPONSE The Kelvin temperature goes from 288 K to 311 K. If the air is released at constant pressure, then volume and pressure remain constant while temperature and number of moles vary according to n T = P V / R so that n1 T1 = n2 T2, and n2 = n1 * (T1 / T2) = n1 * (288 / 311) and the change in amount of gas is n1 - n2 = n1 - 288/311 n1 = n1( 1 - 288 / 311), or about 7.4% of n1. If the temperature is first raised to 311 K, then the gas is released, it is the pressure and amount of gas that change. In that case the change in the amount of the gas is n1 - n3 = n1 - (321 kPa / 346 kPa) * n1 = n1 ( 1 - 321 / 346), or about 7.2% of n1. The fractions 288/311 and 321 / 346 don't differ by much, not do the percents, but they do differ. Your Self-Critique: Your Self-Critique Rating: ********************************************* Question: query univ phy 17.116 (15.106 10th edition) 1.5 * 10^11 m, 1.5 kW/m^2, sun rad 6.96 * 10^8 m. How did you calculate the total radiation of the Sun and how did you use this result to get the radiation per unit area? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your Solution: confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: Outline of solution strategy: If we multiply the number of watts per unit of area by the surface area of the Sun we get the number of watts radiated from the Sun. The energy flows outward in a spherically symmetric manner; at any distance the entire power is distributed over the radius of a sphere concentric with the Sun and of radius equal to the distance. So if we divide that number of watts by the area of a sphere whose radius is equal to that of the Earths orbit, we get the number of watts per unit of area at that distance. This strategy is followed in the student solution given below: Good student solution: Surface area of sphere of radius r is 4 pi r^2; if flux intensity is I then flux = 4 pi r^2 I. When r = 1.5 * 10^11 m, I = 1500 W / m^2, so the flux is 4 pi r^2 I = 4 pi * (1.5 * 10^11 m)^2 * 1500 W / m^2 = 4.28 * 10^26 watts. 4.28055 x 10 ^ 26 W / (4*`pi * (6.96 x 10 ^ 8 m)^2) = 4.28055 x 10 ^ 26 W / 6.08735 x 10 ^ 18 m^2 = 70318775.82 J/s/m^2 = 7.03 x 10 ^ 7 J/s/m^2 If the sun is radiating as an ideal blackbody, e = 1, then T would be found as follows: H = `dQ/`dt = 4.28055 x 10 ^ 26 W = (4*`pi * (6.96 x 10 ^ 8 m)^2) * (1) * (5.67051 x 10^-8 W/m^2*K) * T^4 So T^ 4 = 4.28055 x 10 ^ 26 W / 6.087351 x 10 ^ 18 m^2) * 1 * (5.67051 x 10^-8 W/m^2*K) T^4 = 1.240 * 10 ^ 15 K ^4 T = 5934.10766 K on surface of sun. ** Your Self-Critique: Your Self-Critique Rating: ********************************************* Question: univ phy (omitted from 12th edition, but should be worked now) was 17.115 Solar radiation of intensity 600 watts / m^2 is incident on an ice sheet. The temperature above and below the ice sheet is 0 Celsius. Assuming that 70% of the radiation is absorbed at the surface of the ice, how long take to melt a layer 1.2 cm this? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your Solution: confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** Thermal energy is not radiating in significant quantities from the ice, so only the incoming radiation needs to be considered, and as stated only 70% of that energy is absorbed by the ice.. 70% of the incoming 600 watts/m^2 is 420 watts / m^2, or 420 Joules/second for every square meter if ice. Melting takes place at 0 C so there is no thermal exchange with the environment. Thus each square meter absorbs 420 Joules of energy per second. We need to consider the volume of ice corresponding to a square meter. Having found that we can determine the energy required to melt the given thickness: A 1.2 cm thickness of ice will have a volume of .012 m^3 for every square meter of surface area; the mass will be close to 1000 kg/m^3, so there are about 12 kg of ice for every m^2 of surface (you can obtain a more accurate result by using the a more accurate density; the density of ice (which floats in water) is actually somewhat less than that of water). It takes about 330,000 Joules to melt a kg of ice at 0 C, so to melt 12 kg requires around 4,000,000 J. At 420 Joules/sec this will require roughly 10,000 seconds, or around 3 hours. All these calculations were done mentally and are therefore approximate. You should check them yourself, using appropriately precise values of the constants, etc. ** " end document Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: univ phy (omitted from 12th edition, but should be worked now) was 17.115 Solar radiation of intensity 600 watts / m^2 is incident on an ice sheet. The temperature above and below the ice sheet is 0 Celsius. Assuming that 70% of the radiation is absorbed at the surface of the ice, how long take to melt a layer 1.2 cm this? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your Solution: confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** Thermal energy is not radiating in significant quantities from the ice, so only the incoming radiation needs to be considered, and as stated only 70% of that energy is absorbed by the ice.. 70% of the incoming 600 watts/m^2 is 420 watts / m^2, or 420 Joules/second for every square meter if ice. Melting takes place at 0 C so there is no thermal exchange with the environment. Thus each square meter absorbs 420 Joules of energy per second. We need to consider the volume of ice corresponding to a square meter. Having found that we can determine the energy required to melt the given thickness: A 1.2 cm thickness of ice will have a volume of .012 m^3 for every square meter of surface area; the mass will be close to 1000 kg/m^3, so there are about 12 kg of ice for every m^2 of surface (you can obtain a more accurate result by using the a more accurate density; the density of ice (which floats in water) is actually somewhat less than that of water). It takes about 330,000 Joules to melt a kg of ice at 0 C, so to melt 12 kg requires around 4,000,000 J. At 420 Joules/sec this will require roughly 10,000 seconds, or around 3 hours. All these calculations were done mentally and are therefore approximate. You should check them yourself, using appropriately precise values of the constants, etc. ** " end document Self-critique (if necessary): ------------------------------------------------ Self-critique rating: #*&! ********************************************* Question: univ phy (omitted from 12th edition, but should be worked now) was 17.115 Solar radiation of intensity 600 watts / m^2 is incident on an ice sheet. The temperature above and below the ice sheet is 0 Celsius. Assuming that 70% of the radiation is absorbed at the surface of the ice, how long take to melt a layer 1.2 cm this? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your Solution: confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: ** Thermal energy is not radiating in significant quantities from the ice, so only the incoming radiation needs to be considered, and as stated only 70% of that energy is absorbed by the ice.. 70% of the incoming 600 watts/m^2 is 420 watts / m^2, or 420 Joules/second for every square meter if ice. Melting takes place at 0 C so there is no thermal exchange with the environment. Thus each square meter absorbs 420 Joules of energy per second. We need to consider the volume of ice corresponding to a square meter. Having found that we can determine the energy required to melt the given thickness: A 1.2 cm thickness of ice will have a volume of .012 m^3 for every square meter of surface area; the mass will be close to 1000 kg/m^3, so there are about 12 kg of ice for every m^2 of surface (you can obtain a more accurate result by using the a more accurate density; the density of ice (which floats in water) is actually somewhat less than that of water). It takes about 330,000 Joules to melt a kg of ice at 0 C, so to melt 12 kg requires around 4,000,000 J. At 420 Joules/sec this will require roughly 10,000 seconds, or around 3 hours. All these calculations were done mentally and are therefore approximate. You should check them yourself, using appropriately precise values of the constants, etc. ** " end document Self-critique (if necessary): ------------------------------------------------ Self-critique rating: #*&!#*&!