#$&*
course Phy 232
Add the extension to the tube, so that by squeezing you can force water from the bottle into the tube. Squeeze hard enough to raise the water to as high as possible into the tube. Evaluate how hard you had to squeeze, on the 1-10 scale you used in part 1b. Measure how far you were able to raise water in the tube above the level of the water in the bottle. How high did you raise the water, and how hard did you have to squeeze (using the 1-10 scale)?
****
It took about an 8 to get the water into the tube.
#$&*
Give the bottle a squeeze corresponding to 1 on the 1-10 scale, and observe how high water rises. Then give it another squeeze, halfway between 1 and the squeeze you used to raise water to the top of the tube. Do this blind. Don't look at the tube, just feel the squeeze. Then look at the tube and see where the water is.
Report a table of water column height vs. squeeze.
****
1,11.25
4,6.5
The first column is squeeze based on the scale and the second column is water column height in inches.
#$&*
"
&#This looks good. Let me know if you have any questions. &#