course phy fw܊YozDղ{Student Name:
......!!!!!!!!...................................
08:49:08 `q001. Note that there are 9 questions in this assignment. Using the equation vf = v0 + a * `dt determine the acceleration of an object whose velocity increases at a uniform rate from 10 m/s to 30 m/s in 15 seconds. Begin by solving the equation for the acceleration a, then 'plug in' your initial and final velocities. Describe your work step y step.
......!!!!!!!!...................................
RESPONSE --> ok, the program crashed on question 7, and my send file has answers 1- 6( i checked) so here are 7, 8, and 9.
.................................................
......!!!!!!!!...................................
08:49:20 The equation vf = v0 + a * `dt is solved for a by first adding -v0 to both sides to obtain vf - v0 = v0 + a * `dt - v0, which simplifies to vf - v0 = a * `dt. Both sides are then divided by `dt to obtain (vf - v0) / `dt = a. Reversing left-and right-hand sides we obtain the formula a = (vf - v0) / `dt. We then plug in our given values of initial and final velocities and the time interval. Since velocity increases from 10 m/s to 30 m/s, initial velocity is v0 = 10 m/s and final velocity is vf = 30 m/s. The time interval `dt is 15 seconds, so we have a = (30 m/s - 10 m/s) / (15 s) = 20 m/s / (15 s) = 1.33.. m/s^2.
......!!!!!!!!...................................
RESPONSE --> on to q 7....
.................................................
......!!!!!!!!...................................
08:49:30 `q002. It wasn't necessary to use a equation to solve this problem. How could this problem had been reasoned out without the use of an equation?
......!!!!!!!!...................................
RESPONSE --> to q 7.........
.................................................
......!!!!!!!!...................................
08:49:42 Knowing that acceleration is the average rate at which velocity changes, we would first find the change in velocity from 10 meters/second to 30 meters/second, which is 20 meters/second. We would then divided change in velocity by the time interval to get 20 meters/second / (15 sec) = 1.33 m/s^2.
......!!!!!!!!...................................
RESPONSE --> onward
.................................................
......!!!!!!!!...................................
08:49:50 `q003. Use the equation `ds = (vf + v0) / 2 * `dt to determine the initial velocity of an object which accelerates uniformly through a distance of 80 meters in 10 seconds, ending up at a velocity of 6 meters / sec. begin by solving the equation for the desired quantity. Show every step of your solution.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:49:52 We begin by solving the equation for v0. Starting with `ds = (vf + v0) / 2 * `dt, we can first multiply both sides of the equation by 2 / `dt, which gives us `ds * 2 / `dt = (vf + v0) / 2 * `dt * 2 / `dt. The right-hand side can be rearranged to give (vf + v0) * `dt / `dt * 2 / 2; since `dt / `dt = 1 and 2 / 2 = 1 the right-hand side becomes just vf + v0. The equation therefore becomes 2 * `ds / `dt = vf + v0. Adding -vf to both sides we obtain v0 = 2 * `ds / `dt - vf. We now plug in `ds = 80 meters, `dt = 10 sec and vf = 6 m/s to get v0 = 2 * 80 meters / 10 sec - 6 m/s = 160 meters / 10 sec - 6 m/s = 16 m/s - 6 m/s = 10 m/s.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:49:54 `q004. We can reconcile the above solution with straightforward reasoning. How could the initial velocity have been reasoned out from the given information without the use of an equation? Hint: two of the quantities given in the problem can be combined to give another important quantity, which can then be combined with the third given quantity to reason out the final velocity.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:50:01 The average velocity of the object is the average rate at which its position changes, which is equal to the 80 meters change in position divided by the 10 s change in clock time, or 80 meters / 10 sec = 8 meters / sec. Since the 8 m/s average velocity is equal to the average of the unknown initial velocity and the 6 m/s final velocity, we ask what quantity when average with 6 m/s will give us 8 m/s. Knowing that the average must be halfway between the two numbers being averaged, we see that the initial velocity must be 10 m/s. That is, 8 m/s is halfway between 6 m/s and 10 m/s.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:51:00 `q005. Using the equation `ds = v0 `dt + .5 a `dt^2 determine the initial velocity of an object which accelerates uniformly at -2 m/s^2, starting at some unknown velocity, and is displaced 80 meters in 10 seconds. Begin by solving the equation for the unknown quantity and show every step.
......!!!!!!!!...................................
RESPONSE --> actually, I didn't put both positive and negative root values for my answer on the send file you get first......
.................................................
......!!!!!!!!...................................
08:51:19 The unknown quantity is the initial velocity v0. To solve for v0 we start with `ds = v0 `dt + .5 a `dt^2. We first add -.5 a `dt^2 to both sides to obtain `ds - .5 a `dt^2 = v0 `dt. We then divide both sides by `dt to obtain (`ds - .5 a `dt^2) / `dt = v0. Then we substitute the given displacement `ds = 80 meters, acceleration a = -2 m/s^2 and time interval `dt = 10 seconds to obtain v0 = [ 80 meters - .5 * (-2 m/s^2) * (10 sec)^2 ] / (10 sec) = [ 80 meters - .5 * (-2 m/s^2) * 100 s^2 ] / (10 sec) = [ 80 m - (-100 m) ] / (10 sec) = 180 m / (10 s) = 18 m/s.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:51:35 `q006. Check the consistency of this result by verifying, by direct reasoning rather than equations, that an object whose initial velocity is 18 m/s and which accelerates for 10 seconds at an acceleration of -2 m/s^2 does indeed experience a displacement of 80 meters.
......!!!!!!!!...................................
RESPONSE --> i did
.................................................
......!!!!!!!!...................................
08:51:42 The change in the velocity of the object will be -2 m/s^2 * 10 s = -20 m/s. The object will therefore have a final velocity of 18 m/s - 20 m/s = -2 m/s. Its average velocity will be the average (18 m/s + (-2 m/s) ) / 2 = 8 m/s. An object which travels at an average velocity of 8 m/s for 10 sec will travel 80 meters.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:52:17 `q007. Using the equation vf^2 = v0^2 + 2 a `ds determine the initial velocity of an object which attains a final velocity of 20 meters/second after accelerating uniformly at 2 meters/second^2 through a displacement of 80 meters. Begin by solving the equation for the unknown quantity and show every step.
......!!!!!!!!...................................
RESPONSE --> actually, i did q 7 too,
.................................................
......!!!!!!!!...................................
08:52:45 To solve for the unknown initial velocity v0 we start with vf^2 = v0^2 + 2 a `ds. We first add -2 a `ds to both sides to obtain vf^2 - 2 a `ds = v0^2. We then reverse the right-and left-hand sides and take the square root of both sides, obtaining v0 = +- `sqrt( vf^2 - 2 a `ds). We then substitute the given quantities vf = 20 m/s, `ds = 80 m and a = 3 m/s^2 to obtain v0 = +- `sqrt( (20 m/s)^2 - 2 * 2 m/s^2 * 80 m) = +- `sqrt( 400 m^2 / s^2 - 320 m^2 / s^2) = +- `sqrt(80 m^2 / s^2) = +- 8.9 m/s (approx.).
......!!!!!!!!...................................
RESPONSE --> here is where I left out the negative value of the root.
.................................................
......!!!!!!!!...................................
11:55:26 `q008. We can verify that starting at +8.9 m/s an object which attains a final velocity of 20 m/s while displacing 80 meters must accelerate at 2 m/s^2. In this case the average velocity will be ( 8.9 m/s + 20 m/s) / 2 = 14.5 m/s (approx) and the change in velocity will be 20 m/s - 8.9 m/s = 11.1 m/s. At average velocity 14.5 meters/second the time required to displace the 80 meters will be 80 m / (14.5 sec) = 5.5 sec (approx). The velocity change of 11.1 meters/second in 5.5 sec implies an average acceleration of 11.1 m/s / (5.5 sec) = 2 m/s^2 (approx), consistent with our results. Verify that starting at -8.9 m/s the object will also have acceleration 2 meters/second^2 if it ends up at velocity 20 m/s while displacing 80 meters.
......!!!!!!!!...................................
RESPONSE --> ok, here we go!! since we know that the initial velocity = - 8.9 m/s and we know the final velocity is 20 m/s, we can use the average velocity and the distance to find the time. 20 m/s + - 8.9 m/s = 11.1 m/s 11.1/2 = 5.55 m/s = vAve 80 m = vave (5.55 m/s) * time 80 m/5.55 m/s = 14.41 s now I can use the 14.41 s time and the difference between v0 and vf to find the rate of change, or the acceleration. 20 m/s - - 8.9 m/s = 28.9 m/s divided by the time 28.9 m/s / 14.41 s = 2.0 m/s^2
.................................................
......!!!!!!!!...................................
11:55:45 In this case the average velocity will be ( -8.9 m/s + 20 m/s) / 2 = 5.5 m/s (approx) and the change in velocity will be 20 m/s - (-8.9 m/s) = 28.9 m/s (approx). At average velocity 5.5 meters/second the time required to displace the 80 meters will be 80 m / (5.5 sec) = 14.5 sec (approx). The velocity change of 28.5 meters/second in 14.5 sec implies an average acceleration of 28.5 m/s / (14.5 sec) = 2 m/s^2 (approx), again consistent with our results.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
23:21:20 `q009. Describe in commonsense terms the motion of the object in this example if its initial velocity is indeed -8.9 m/s. Assume that the object starts at the crossroads between two roads running North and South, and East and West, respectively, and that the object ends up 80 meters North of the crossroads. In what direction does it start out, what happens to its speed, and how does it end up where it does?
......!!!!!!!!...................................
RESPONSE --> The car is initially moving south (rolling backwards down hill?) at 8.9 m/s. It begins accelerating (the engine kicks in perhaps, slowing and stopping the backwards roll of the car before actually moving forward ) north towards and past the crossroads at 2m/s/s, eventually travelling at 20 m/s north 80 m north of the crossroads.
.................................................
......!!!!!!!!...................................
23:24:44 The object ends up at position +80 meters, which is assumed to be 80 meters to the North. Its initial velocity is -8.9 m/s, with the - sign indicating that the initial velocity is in the direction opposite to the displacement of the object. So the object must start out moving to the South at 8.9 meters/second. Its acceleration is +2 m/s^2, which is in the opposite direction to its initial velocity. This means that the velocity of the object changes by +2 m/s every second. After 1 second the velocity of the object will therefore be -8.9 m/s + 2 m/s = -6.9 m/s. After another second the velocity will be -6.9 m/s + 2 m/s = -4.9 m/s. After another second the velocity will be -2.9 m/s, after another -.9 m/s, and after another -.9 m/s + 2 m/s = +1.1 m/s. The speed of the object must therefore decrease, starting at 8.9 m/s (remember speed is always positive because speed doesn't have direction) and decreasing to 6.9 m/s, then 4.9 m/s, etc. until it reaches 0 for an instant, and then starts increasing again. Since velocities after that instant become positive, the object will therefore start moving to the North immediately after coming to a stop, picking up speed at 2 m/s every second. This will continue until the object has attained a velocity of +20 meters/second and has displaced +80 meters from its initial position.{}{}It is important to understand that it is possible for velocity to be in one direction and acceleration in the other. In this case the initial velocity is negative while the acceleration is positive. If this continues long enough the velocity will reach zero, then will become positive.
......!!!!!!!!...................................
RESPONSE --> I did mention moving backward at first, slowing, stopping, and then moving forward, but I didn't mention the amount by which the speed changed at first or afterwards.......
.................................................
Ls҂Ϥ Student Name: assignment #007
.................................................
......!!!!!!!!...................................
09:21:04 `q001. We obtain an estimate of the acceleration of gravity by determining the slope of an acceleration vs. ramp slope graph for an object gliding down an incline. Sample data for an object gliding down a 50-cm incline indicate that the object glides down the incline in 5 seconds when the raised end of the incline is .5 cm higher than the lower end; the time required from rest is 3 seconds when the raised end is 1 cm higher than the lower end; and the time from rest is 2 seconds when the raised end is 1.5 cm higher than the lower end. What is the acceleration for each trial?
......!!!!!!!!...................................
RESPONSE --> In the first trial, d= 50 cm 'dt= 5 seconds vAve= (50 cm/5s) =10 cm/s = (vf+0)/2 vf = 5 cm/s a= (vf- 0)/'dt= 5cm/s/5 seconds = 1 cm/s^2 In the second trial, d = 50 cm 'dt = 3 seconds vAve= 50cm/3 sec = 16 2/3 cm/sec = vf/2 since v0 = 0 vf = 8 1/3 cm/s a= vf/'dt = 8 1/3 cm/s / 3 s= ~ 2.78 cm/s^2 In the third trial, 'ds = 50 cm 'dt = 2 vAve = 50 cm/2 sec = 25 cm/s = vf/2 vf = 12 .5 cm/s a = 12.5 cm/s/2 seconds= 6. 25 cm/s^2
.................................................
......!!!!!!!!...................................
09:24:02 We can find the accelerations either using equations or direct reasoning. To directly reason the acceleration for the five-second case, we note that the average velocity in this case must be 50 cm/(5 seconds) = 10 cm/s. Since the initial velocity was 0, assuming uniform acceleration we see that the final velocity must be 20 cm/second, since 0 cm/s and 20 cm/s average out to 10 cm/s. This implies a velocity change of 20 cm/second a time interval of 5 seconds, or a uniform acceleration of 20 cm/s / (5 s) = 4 cm/s^2. The acceleration in the 3-second case could also be directly reasoned, but instead we will note that in this case we have the initial velocity v0 = 0, the time interval `dt = 3 sec, and the displacement `ds = 50 cm. We can therefore find the acceleration from the equation `ds = v0 `dt + .5 a `dt^2. Noting first that since v0 = 0 the term v0 `dt must also be 0,we see that in this case the equation reduces to `ds = .5 a `dt^2. We easily solve for the acceleration, obtaining a = 2 `ds / `dt^2. In this case we have a = 2 * (50 cm) / (3 sec)^2 = 11 cm/s^2 (rounded to nearest cm/s^2). For the 2-second case we can use the same formula, obtaining a = 2 * (50 cm) / (2 sec)^2 = 25 cm/s^2.
......!!!!!!!!...................................
RESPONSE --> My final velocity is wrong for every trial..... I divided instead of multiplied.............. (idiot!!!!) I did the rest right........
.................................................
......!!!!!!!!...................................
09:29:05 `q002. What are the ramp slopes associated with these accelerations?
......!!!!!!!!...................................
RESPONSE --> .5 cm - 0 cm (rise)/ 50 cm (run) is a slope of .01 cm/cm 1 cm /50 cm is a slope of . 02 cm/cm and a rise of 1.5cm/50 cm gives us a slope of .03 cm/cm
.................................................
......!!!!!!!!...................................
09:29:40 For the 5-second trial, where acceleration was 4 cm/s^2, the 'rise' of the ramp was .5 cm and the 'run' was nearly equal to the 50-cm length of the ramp so the slope was very close to .5 cm / (50 cm) = .01. For the 3-second trial, where acceleration was 11 cm/s^2, the 'rise' of the ramp was 1 cm and the 'run' was very close to the 50-cm length, so the slope was very close to 1 cm / (50 cm) = .02. For the 2-second trial, where the acceleration was 25 cm/s^2, the slope is similarly found to be very close to 1.5 cm / (50 cm) = .03.
......!!!!!!!!...................................
RESPONSE --> at least I did my math right this time........
.................................................
ʀ姃룸T Student Name: assignment #007
.................................................
......!!!!!!!!...................................
13:59:11 `q001. We obtain an estimate of the acceleration of gravity by determining the slope of an acceleration vs. ramp slope graph for an object gliding down an incline. Sample data for an object gliding down a 50-cm incline indicate that the object glides down the incline in 5 seconds when the raised end of the incline is .5 cm higher than the lower end; the time required from rest is 3 seconds when the raised end is 1 cm higher than the lower end; and the time from rest is 2 seconds when the raised end is 1.5 cm higher than the lower end. What is the acceleration for each trial?
......!!!!!!!!...................................
RESPONSE --> Trial 1 d= 50 rise = .5 cm 'dt = 5 seconds v0 = 0 ok, vave= d/t or vAve = 50cm/5 seconds= 10 cm/sec when v0=0, vave * 2 = vf, so vf =20 cm/sec aAve= difference in velocity over time= 20cm/sec/5 sec= 4 cm/s/s= 4cm/s^2 trial 2 time 3 seconds d= 50 rise 1 cm Initial velocity is still 0 50 cm/3 seconds = vave = 16 2/3 cm/sec vf = 2vave= 2* 16.67 cm/sec= 33 1/3 cm/sec (33 .333 cm/sec) a = vf /t (where v0=0) = 33.33 cm/sec/3sec= 11.11 cm/s^2 trial 3 rise 1.5 cm time 2 seconds distance 50 cm vave= 50cm/2seconds = 25 cm/sec vf= 2vave = 25cm/sec *2= 50 cm/sec a = vf-v0/t= 50 cm/sec- 0/2 seconds 25cm/s/s
.................................................
......!!!!!!!!...................................
14:00:12 We can find the accelerations either using equations or direct reasoning. To directly reason the acceleration for the five-second case, we note that the average velocity in this case must be 50 cm/(5 seconds) = 10 cm/s. Since the initial velocity was 0, assuming uniform acceleration we see that the final velocity must be 20 cm/second, since 0 cm/s and 20 cm/s average out to 10 cm/s. This implies a velocity change of 20 cm/second a time interval of 5 seconds, or a uniform acceleration of 20 cm/s / (5 s) = 4 cm/s^2. The acceleration in the 3-second case could also be directly reasoned, but instead we will note that in this case we have the initial velocity v0 = 0, the time interval `dt = 3 sec, and the displacement `ds = 50 cm. We can therefore find the acceleration from the equation `ds = v0 `dt + .5 a `dt^2. Noting first that since v0 = 0 the term v0 `dt must also be 0,we see that in this case the equation reduces to `ds = .5 a `dt^2. We easily solve for the acceleration, obtaining a = 2 `ds / `dt^2. In this case we have a = 2 * (50 cm) / (3 sec)^2 = 11 cm/s^2 (rounded to nearest cm/s^2). For the 2-second case we can use the same formula, obtaining a = 2 * (50 cm) / (2 sec)^2 = 25 cm/s^2.
......!!!!!!!!...................................
RESPONSE --> I kept plugging in to the same formula--- it works.....
.................................................
......!!!!!!!!...................................
14:04:43 `q002. What are the ramp slopes associated with these accelerations?
......!!!!!!!!...................................
RESPONSE --> 4cm/s^2 at .5 cm (rise)/50cm (run) = .01cm slope 11.1 cm/s^2 at 1 cm rise over a 50cm run = .02 cm slope 25cm/s^2 at 1.5 cm rise/50 cm = .03 cm slope
.................................................
......!!!!!!!!...................................
14:05:03 For the 5-second trial, where acceleration was 4 cm/s^2, the 'rise' of the ramp was .5 cm and the 'run' was nearly equal to the 50-cm length of the ramp so the slope was very close to .5 cm / (50 cm) = .01. For the 3-second trial, where acceleration was 11 cm/s^2, the 'rise' of the ramp was 1 cm and the 'run' was very close to the 50-cm length, so the slope was very close to 1 cm / (50 cm) = .02. For the 2-second trial, where the acceleration was 25 cm/s^2, the slope is similarly found to be very close to 1.5 cm / (50 cm) = .03.
......!!!!!!!!...................................
RESPONSE --> yep
.................................................
......!!!!!!!!...................................
13:36:58 `q003. Sketch a reasonably accurate graph of acceleration vs. ramp slope and give a good description and interpretation of the graph. Be sure to include in your description how the graph points seem to lie with respect to the straight line that comes as close as possible, on the average, to the three points.
......!!!!!!!!...................................
RESPONSE --> the graph of acceleration vs ramp slope with acceleration as thevertical axis and ramp slope as the horizontal axis, initial acceleration and slope = 0, the graph is curved so that it increases at a increasing rate, indicating that the acceleration icreases more quickly as the slope of the ramp increases. This bothered me at first, since I know that acceleration due to gravity is a constant (until terminal velocity anyway) so, I assumed that the increase in acceleration should decrease. However, then I realized that 25 cm/s^2 is a VERY low number compared to 980 cm/s^2, so...........
.................................................
......!!!!!!!!...................................
13:37:49 The graph will have acceleration in cm/s^2 on the vertical axis (the traditional y-axis) and ramp slope on the horizontal axis (the traditional x-axis). The graph points will be (.01, 4 cm/s^2), (.02, 11.1 cm/s^2), (.03, 25 cm/s^2). The second point lies somewhat lower than a line connecting the first and third points, so the best possible line will probably be lower than the first and third points but higher than the second. The graph indicates that acceleration increases with increasing slope, which should be no surprise. It is not clear from the graph whether a straight line is in fact the most appropriate model for the data. If timing wasn't particularly accurate, these lines could easily be interpreted as being scattered from the actual linear behavior due to experimental errors. Or the graph could indicate acceleration vs. ramp slope behavior that is increasing at an increasing rate.
......!!!!!!!!...................................
RESPONSE --> I forgot to do a straight line analysis.....
.................................................
......!!!!!!!!...................................
16:24:40 `q004. Carefully done experiments show that for small slopes (up to a slope of about .1) the graph appears to be linear or very nearly so. This agrees with theoretical predictions of what should happen. Sketch a vertical line at x = .05. Then extend the straight line you sketched previously until it intersects the y axis and until it reaches past the vertical line at x = .05. What are the coordinates of the points where this line intersects the y-axis, and where it intersects the x =.05 line? What are the rise and the run between these points, and what therefore is the slope of your straight line?
......!!!!!!!!...................................
RESPONSE --> By extending my best fit line, I get an intersection with ramp slope .05 cm at y = 42 cm/s^2, and a y axis intercept at -7 cm /s/s. this gives me a difference of 49 cm /s^2 over a .05 cm/cm ramp slope change ging me a slope of 980 cm^2/cms^2
.................................................
......!!!!!!!!...................................
17:14:10 A pretty good straight line goes through the points (0, -6 cm/s^2) and (.05, 42 cm/s^2). Your y coordinates might differ by a few cm/s^2 either way. For the coordinates given here, the rise is from -6 cm/s^2 to 42 cm/s^2, a rise of 48 cm/s^2. The run is from 0 to .05, a run of .05. The slope of the straight line is approximately 48 cm/s^2 / .05 = 960 cm/s^2. Note that this is pretty close to the accepted value, 980 cm/second^2, of gravity. Carefully done, this experiment will give us a very good estimate of the acceleration of gravity.
......!!!!!!!!...................................
RESPONSE --> I didn't reduce my fraction entirely..........
.................................................
......!!!!!!!!...................................
17:39:56 `q005. The most accurate way to measure the acceleration of gravity is to use the relationship T = 2 `pi / `sqrt(g) * `sqrt(L) for the period of a pendulum. Use your washer pendulum and time 100 complete back-and-forth cycles of a pendulum of length 30 cm. Be sure to count carefully and don't let the pendulum swing out to a position more than 10 degrees from vertical. How long did it take, and how long did each cycle therefore last?
......!!!!!!!!...................................
RESPONSE --> 122 seconds for 100 swings--- 1.22 seconds per cycle
.................................................
......!!!!!!!!...................................
19:23:12 `q006. You now have values for the period T and the length L, so you can use the relationship T = 2 `pi / `sqrt(g) * `sqrt(L) to find the acceleration g of gravity. Solve the equation for g and then use your values for T and L to determine the acceleration of gravity.
......!!!!!!!!...................................
RESPONSE --> t= 1.08 sec/cycle l = 30 cm t= 2pi/ sqrt(g) * sqrt(l) T/(sqrt L) = 2pi/(sqrt g) sqrt g * (T/sqrt L) = 2pi sqrt g= 2pi(sqrt L/T) g= (2 pi * (sqrt L)/T)^2 g= (2 pi * (sqrt (30))/1.08s/c)^2 g= (6.28* (5.48cm/1.08s/c)^2 g= (31.85)^2= 1014.4 cm/s^2
.................................................
......!!!!!!!!...................................
19:23:45 Solving T = 2 `pi / `sqrt(g) * `sqrt(L) for g, we can first multiply both sides by `sqrt(g) to obtain T * `sqrt(g) = 2 `pi `sqrt(L). Then dividing both sides by T we obtain `sqrt(g) = 2 `pi `sqrt(L) / T. Squaring both sides we finally obtain {}g = 4 `pi^2 L / T^2. Plugging in the values given here, L = 30 cm and T = 1.08 sec, we obtain g = 4 `pi^2 * 30 cm / (1.08 sec)^2 = 1030 cm/s^2. You should check these calculations for accuracy, since they were mentally approximated.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
"
course phy fw܊YozDղ{Student Name:
......!!!!!!!!...................................
08:49:08 `q001. Note that there are 9 questions in this assignment. Using the equation vf = v0 + a * `dt determine the acceleration of an object whose velocity increases at a uniform rate from 10 m/s to 30 m/s in 15 seconds. Begin by solving the equation for the acceleration a, then 'plug in' your initial and final velocities. Describe your work step y step.
......!!!!!!!!...................................
RESPONSE --> ok, the program crashed on question 7, and my send file has answers 1- 6( i checked) so here are 7, 8, and 9.
.................................................
......!!!!!!!!...................................
08:49:20 The equation vf = v0 + a * `dt is solved for a by first adding -v0 to both sides to obtain vf - v0 = v0 + a * `dt - v0, which simplifies to vf - v0 = a * `dt. Both sides are then divided by `dt to obtain (vf - v0) / `dt = a. Reversing left-and right-hand sides we obtain the formula a = (vf - v0) / `dt. We then plug in our given values of initial and final velocities and the time interval. Since velocity increases from 10 m/s to 30 m/s, initial velocity is v0 = 10 m/s and final velocity is vf = 30 m/s. The time interval `dt is 15 seconds, so we have a = (30 m/s - 10 m/s) / (15 s) = 20 m/s / (15 s) = 1.33.. m/s^2.
......!!!!!!!!...................................
RESPONSE --> on to q 7....
.................................................
......!!!!!!!!...................................
08:49:30 `q002. It wasn't necessary to use a equation to solve this problem. How could this problem had been reasoned out without the use of an equation?
......!!!!!!!!...................................
RESPONSE --> to q 7.........
.................................................
......!!!!!!!!...................................
08:49:42 Knowing that acceleration is the average rate at which velocity changes, we would first find the change in velocity from 10 meters/second to 30 meters/second, which is 20 meters/second. We would then divided change in velocity by the time interval to get 20 meters/second / (15 sec) = 1.33 m/s^2.
......!!!!!!!!...................................
RESPONSE --> onward
.................................................
......!!!!!!!!...................................
08:49:50 `q003. Use the equation `ds = (vf + v0) / 2 * `dt to determine the initial velocity of an object which accelerates uniformly through a distance of 80 meters in 10 seconds, ending up at a velocity of 6 meters / sec. begin by solving the equation for the desired quantity. Show every step of your solution.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:49:52 We begin by solving the equation for v0. Starting with `ds = (vf + v0) / 2 * `dt, we can first multiply both sides of the equation by 2 / `dt, which gives us `ds * 2 / `dt = (vf + v0) / 2 * `dt * 2 / `dt. The right-hand side can be rearranged to give (vf + v0) * `dt / `dt * 2 / 2; since `dt / `dt = 1 and 2 / 2 = 1 the right-hand side becomes just vf + v0. The equation therefore becomes 2 * `ds / `dt = vf + v0. Adding -vf to both sides we obtain v0 = 2 * `ds / `dt - vf. We now plug in `ds = 80 meters, `dt = 10 sec and vf = 6 m/s to get v0 = 2 * 80 meters / 10 sec - 6 m/s = 160 meters / 10 sec - 6 m/s = 16 m/s - 6 m/s = 10 m/s.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:49:54 `q004. We can reconcile the above solution with straightforward reasoning. How could the initial velocity have been reasoned out from the given information without the use of an equation? Hint: two of the quantities given in the problem can be combined to give another important quantity, which can then be combined with the third given quantity to reason out the final velocity.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:50:01 The average velocity of the object is the average rate at which its position changes, which is equal to the 80 meters change in position divided by the 10 s change in clock time, or 80 meters / 10 sec = 8 meters / sec. Since the 8 m/s average velocity is equal to the average of the unknown initial velocity and the 6 m/s final velocity, we ask what quantity when average with 6 m/s will give us 8 m/s. Knowing that the average must be halfway between the two numbers being averaged, we see that the initial velocity must be 10 m/s. That is, 8 m/s is halfway between 6 m/s and 10 m/s.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:51:00 `q005. Using the equation `ds = v0 `dt + .5 a `dt^2 determine the initial velocity of an object which accelerates uniformly at -2 m/s^2, starting at some unknown velocity, and is displaced 80 meters in 10 seconds. Begin by solving the equation for the unknown quantity and show every step.
......!!!!!!!!...................................
RESPONSE --> actually, I didn't put both positive and negative root values for my answer on the send file you get first......
.................................................
......!!!!!!!!...................................
08:51:19 The unknown quantity is the initial velocity v0. To solve for v0 we start with `ds = v0 `dt + .5 a `dt^2. We first add -.5 a `dt^2 to both sides to obtain `ds - .5 a `dt^2 = v0 `dt. We then divide both sides by `dt to obtain (`ds - .5 a `dt^2) / `dt = v0. Then we substitute the given displacement `ds = 80 meters, acceleration a = -2 m/s^2 and time interval `dt = 10 seconds to obtain v0 = [ 80 meters - .5 * (-2 m/s^2) * (10 sec)^2 ] / (10 sec) = [ 80 meters - .5 * (-2 m/s^2) * 100 s^2 ] / (10 sec) = [ 80 m - (-100 m) ] / (10 sec) = 180 m / (10 s) = 18 m/s.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:51:35 `q006. Check the consistency of this result by verifying, by direct reasoning rather than equations, that an object whose initial velocity is 18 m/s and which accelerates for 10 seconds at an acceleration of -2 m/s^2 does indeed experience a displacement of 80 meters.
......!!!!!!!!...................................
RESPONSE --> i did
.................................................
......!!!!!!!!...................................
08:51:42 The change in the velocity of the object will be -2 m/s^2 * 10 s = -20 m/s. The object will therefore have a final velocity of 18 m/s - 20 m/s = -2 m/s. Its average velocity will be the average (18 m/s + (-2 m/s) ) / 2 = 8 m/s. An object which travels at an average velocity of 8 m/s for 10 sec will travel 80 meters.
......!!!!!!!!...................................
RESPONSE -->
.................................................
......!!!!!!!!...................................
08:52:17 `q007. Using the equation vf^2 = v0^2 + 2 a `ds determine the initial velocity of an object which attains a final velocity of 20 meters/second after accelerating uniformly at 2 meters/second^2 through a displacement of 80 meters. Begin by solving the equation for the unknown quantity and show every step.
......!!!!!!!!...................................
RESPONSE --> actually, i did q 7 too,
.................................................
......!!!!!!!!...................................
08:52:45 To solve for the unknown initial velocity v0 we start with vf^2 = v0^2 + 2 a `ds. We first add -2 a `ds to both sides to obtain vf^2 - 2 a `ds = v0^2. We then reverse the right-and left-hand sides and take the square root of both sides, obtaining v0 = +- `sqrt( vf^2 - 2 a `ds). We then substitute the given quantities vf = 20 m/s, `ds = 80 m and a = 3 m/s^2 to obtain v0 = +- `sqrt( (20 m/s)^2 - 2 * 2 m/s^2 * 80 m) = +- `sqrt( 400 m^2 / s^2 - 320 m^2 / s^2) = +- `sqrt(80 m^2 / s^2) = +- 8.9 m/s (approx.).
......!!!!!!!!...................................
RESPONSE --> here is where I left out the negative value of the root.
.................................................
......!!!!!!!!...................................
11:55:26 `q008. We can verify that starting at +8.9 m/s an object which attains a final velocity of 20 m/s while displacing 80 meters must accelerate at 2 m/s^2. In this case the average velocity will be ( 8.9 m/s + 20 m/s) / 2 = 14.5 m/s (approx) and the change in velocity will be 20 m/s - 8.9 m/s = 11.1 m/s. At average velocity 14.5 meters/second the time required to displace the 80 meters will be 80 m / (14.5 sec) = 5.5 sec (approx). The velocity change of 11.1 meters/second in 5.5 sec implies an average acceleration of 11.1 m/s / (5.5 sec) = 2 m/s^2 (approx), consistent with our results. Verify that starting at -8.9 m/s the object will also have acceleration 2 meters/second^2 if it ends up at velocity 20 m/s while displacing 80 meters.
......!!!!!!!!...................................
RESPONSE --> ok, here we go!! since we know that the initial velocity = - 8.9 m/s and we know the final velocity is 20 m/s, we can use the average velocity and the distance to find the time. 20 m/s + - 8.9 m/s = 11.1 m/s 11.1/2 = 5.55 m/s = vAve 80 m = vave (5.55 m/s) * time 80 m/5.55 m/s = 14.41 s now I can use the 14.41 s time and the difference between v0 and vf to find the rate of change, or the acceleration. 20 m/s - - 8.9 m/s = 28.9 m/s divided by the time 28.9 m/s / 14.41 s = 2.0 m/s^2
.................................................
......!!!!!!!!...................................
11:55:45 In this case the average velocity will be ( -8.9 m/s + 20 m/s) / 2 = 5.5 m/s (approx) and the change in velocity will be 20 m/s - (-8.9 m/s) = 28.9 m/s (approx). At average velocity 5.5 meters/second the time required to displace the 80 meters will be 80 m / (5.5 sec) = 14.5 sec (approx). The velocity change of 28.5 meters/second in 14.5 sec implies an average acceleration of 28.5 m/s / (14.5 sec) = 2 m/s^2 (approx), again consistent with our results.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
23:21:20 `q009. Describe in commonsense terms the motion of the object in this example if its initial velocity is indeed -8.9 m/s. Assume that the object starts at the crossroads between two roads running North and South, and East and West, respectively, and that the object ends up 80 meters North of the crossroads. In what direction does it start out, what happens to its speed, and how does it end up where it does?
......!!!!!!!!...................................
RESPONSE --> The car is initially moving south (rolling backwards down hill?) at 8.9 m/s. It begins accelerating (the engine kicks in perhaps, slowing and stopping the backwards roll of the car before actually moving forward ) north towards and past the crossroads at 2m/s/s, eventually travelling at 20 m/s north 80 m north of the crossroads.
.................................................
......!!!!!!!!...................................
23:24:44 The object ends up at position +80 meters, which is assumed to be 80 meters to the North. Its initial velocity is -8.9 m/s, with the - sign indicating that the initial velocity is in the direction opposite to the displacement of the object. So the object must start out moving to the South at 8.9 meters/second. Its acceleration is +2 m/s^2, which is in the opposite direction to its initial velocity. This means that the velocity of the object changes by +2 m/s every second. After 1 second the velocity of the object will therefore be -8.9 m/s + 2 m/s = -6.9 m/s. After another second the velocity will be -6.9 m/s + 2 m/s = -4.9 m/s. After another second the velocity will be -2.9 m/s, after another -.9 m/s, and after another -.9 m/s + 2 m/s = +1.1 m/s. The speed of the object must therefore decrease, starting at 8.9 m/s (remember speed is always positive because speed doesn't have direction) and decreasing to 6.9 m/s, then 4.9 m/s, etc. until it reaches 0 for an instant, and then starts increasing again. Since velocities after that instant become positive, the object will therefore start moving to the North immediately after coming to a stop, picking up speed at 2 m/s every second. This will continue until the object has attained a velocity of +20 meters/second and has displaced +80 meters from its initial position.{}{}It is important to understand that it is possible for velocity to be in one direction and acceleration in the other. In this case the initial velocity is negative while the acceleration is positive. If this continues long enough the velocity will reach zero, then will become positive.
......!!!!!!!!...................................
RESPONSE --> I did mention moving backward at first, slowing, stopping, and then moving forward, but I didn't mention the amount by which the speed changed at first or afterwards.......
.................................................
Ls҂Ϥ Student Name: assignment #007
.................................................
......!!!!!!!!...................................
09:21:04 `q001. We obtain an estimate of the acceleration of gravity by determining the slope of an acceleration vs. ramp slope graph for an object gliding down an incline. Sample data for an object gliding down a 50-cm incline indicate that the object glides down the incline in 5 seconds when the raised end of the incline is .5 cm higher than the lower end; the time required from rest is 3 seconds when the raised end is 1 cm higher than the lower end; and the time from rest is 2 seconds when the raised end is 1.5 cm higher than the lower end. What is the acceleration for each trial?
......!!!!!!!!...................................
RESPONSE --> In the first trial, d= 50 cm 'dt= 5 seconds vAve= (50 cm/5s) =10 cm/s = (vf+0)/2 vf = 5 cm/s a= (vf- 0)/'dt= 5cm/s/5 seconds = 1 cm/s^2 In the second trial, d = 50 cm 'dt = 3 seconds vAve= 50cm/3 sec = 16 2/3 cm/sec = vf/2 since v0 = 0 vf = 8 1/3 cm/s a= vf/'dt = 8 1/3 cm/s / 3 s= ~ 2.78 cm/s^2 In the third trial, 'ds = 50 cm 'dt = 2 vAve = 50 cm/2 sec = 25 cm/s = vf/2 vf = 12 .5 cm/s a = 12.5 cm/s/2 seconds= 6. 25 cm/s^2
.................................................
......!!!!!!!!...................................
09:24:02 We can find the accelerations either using equations or direct reasoning. To directly reason the acceleration for the five-second case, we note that the average velocity in this case must be 50 cm/(5 seconds) = 10 cm/s. Since the initial velocity was 0, assuming uniform acceleration we see that the final velocity must be 20 cm/second, since 0 cm/s and 20 cm/s average out to 10 cm/s. This implies a velocity change of 20 cm/second a time interval of 5 seconds, or a uniform acceleration of 20 cm/s / (5 s) = 4 cm/s^2. The acceleration in the 3-second case could also be directly reasoned, but instead we will note that in this case we have the initial velocity v0 = 0, the time interval `dt = 3 sec, and the displacement `ds = 50 cm. We can therefore find the acceleration from the equation `ds = v0 `dt + .5 a `dt^2. Noting first that since v0 = 0 the term v0 `dt must also be 0,we see that in this case the equation reduces to `ds = .5 a `dt^2. We easily solve for the acceleration, obtaining a = 2 `ds / `dt^2. In this case we have a = 2 * (50 cm) / (3 sec)^2 = 11 cm/s^2 (rounded to nearest cm/s^2). For the 2-second case we can use the same formula, obtaining a = 2 * (50 cm) / (2 sec)^2 = 25 cm/s^2.
......!!!!!!!!...................................
RESPONSE --> My final velocity is wrong for every trial..... I divided instead of multiplied.............. (idiot!!!!) I did the rest right........
.................................................
......!!!!!!!!...................................
09:29:05 `q002. What are the ramp slopes associated with these accelerations?
......!!!!!!!!...................................
RESPONSE --> .5 cm - 0 cm (rise)/ 50 cm (run) is a slope of .01 cm/cm 1 cm /50 cm is a slope of . 02 cm/cm and a rise of 1.5cm/50 cm gives us a slope of .03 cm/cm
.................................................
......!!!!!!!!...................................
09:29:40 For the 5-second trial, where acceleration was 4 cm/s^2, the 'rise' of the ramp was .5 cm and the 'run' was nearly equal to the 50-cm length of the ramp so the slope was very close to .5 cm / (50 cm) = .01. For the 3-second trial, where acceleration was 11 cm/s^2, the 'rise' of the ramp was 1 cm and the 'run' was very close to the 50-cm length, so the slope was very close to 1 cm / (50 cm) = .02. For the 2-second trial, where the acceleration was 25 cm/s^2, the slope is similarly found to be very close to 1.5 cm / (50 cm) = .03.
......!!!!!!!!...................................
RESPONSE --> at least I did my math right this time........
.................................................
ʀ姃룸T Student Name: assignment #007
.................................................
......!!!!!!!!...................................
13:59:11 `q001. We obtain an estimate of the acceleration of gravity by determining the slope of an acceleration vs. ramp slope graph for an object gliding down an incline. Sample data for an object gliding down a 50-cm incline indicate that the object glides down the incline in 5 seconds when the raised end of the incline is .5 cm higher than the lower end; the time required from rest is 3 seconds when the raised end is 1 cm higher than the lower end; and the time from rest is 2 seconds when the raised end is 1.5 cm higher than the lower end. What is the acceleration for each trial?
......!!!!!!!!...................................
RESPONSE --> Trial 1 d= 50 rise = .5 cm 'dt = 5 seconds v0 = 0 ok, vave= d/t or vAve = 50cm/5 seconds= 10 cm/sec when v0=0, vave * 2 = vf, so vf =20 cm/sec aAve= difference in velocity over time= 20cm/sec/5 sec= 4 cm/s/s= 4cm/s^2 trial 2 time 3 seconds d= 50 rise 1 cm Initial velocity is still 0 50 cm/3 seconds = vave = 16 2/3 cm/sec vf = 2vave= 2* 16.67 cm/sec= 33 1/3 cm/sec (33 .333 cm/sec) a = vf /t (where v0=0) = 33.33 cm/sec/3sec= 11.11 cm/s^2 trial 3 rise 1.5 cm time 2 seconds distance 50 cm vave= 50cm/2seconds = 25 cm/sec vf= 2vave = 25cm/sec *2= 50 cm/sec a = vf-v0/t= 50 cm/sec- 0/2 seconds 25cm/s/s
.................................................
......!!!!!!!!...................................
14:00:12 We can find the accelerations either using equations or direct reasoning. To directly reason the acceleration for the five-second case, we note that the average velocity in this case must be 50 cm/(5 seconds) = 10 cm/s. Since the initial velocity was 0, assuming uniform acceleration we see that the final velocity must be 20 cm/second, since 0 cm/s and 20 cm/s average out to 10 cm/s. This implies a velocity change of 20 cm/second a time interval of 5 seconds, or a uniform acceleration of 20 cm/s / (5 s) = 4 cm/s^2. The acceleration in the 3-second case could also be directly reasoned, but instead we will note that in this case we have the initial velocity v0 = 0, the time interval `dt = 3 sec, and the displacement `ds = 50 cm. We can therefore find the acceleration from the equation `ds = v0 `dt + .5 a `dt^2. Noting first that since v0 = 0 the term v0 `dt must also be 0,we see that in this case the equation reduces to `ds = .5 a `dt^2. We easily solve for the acceleration, obtaining a = 2 `ds / `dt^2. In this case we have a = 2 * (50 cm) / (3 sec)^2 = 11 cm/s^2 (rounded to nearest cm/s^2). For the 2-second case we can use the same formula, obtaining a = 2 * (50 cm) / (2 sec)^2 = 25 cm/s^2.
......!!!!!!!!...................................
RESPONSE --> I kept plugging in to the same formula--- it works.....
.................................................
......!!!!!!!!...................................
14:04:43 `q002. What are the ramp slopes associated with these accelerations?
......!!!!!!!!...................................
RESPONSE --> 4cm/s^2 at .5 cm (rise)/50cm (run) = .01cm slope 11.1 cm/s^2 at 1 cm rise over a 50cm run = .02 cm slope 25cm/s^2 at 1.5 cm rise/50 cm = .03 cm slope
.................................................
......!!!!!!!!...................................
14:05:03 For the 5-second trial, where acceleration was 4 cm/s^2, the 'rise' of the ramp was .5 cm and the 'run' was nearly equal to the 50-cm length of the ramp so the slope was very close to .5 cm / (50 cm) = .01. For the 3-second trial, where acceleration was 11 cm/s^2, the 'rise' of the ramp was 1 cm and the 'run' was very close to the 50-cm length, so the slope was very close to 1 cm / (50 cm) = .02. For the 2-second trial, where the acceleration was 25 cm/s^2, the slope is similarly found to be very close to 1.5 cm / (50 cm) = .03.
......!!!!!!!!...................................
RESPONSE --> yep
.................................................
......!!!!!!!!...................................
13:36:58 `q003. Sketch a reasonably accurate graph of acceleration vs. ramp slope and give a good description and interpretation of the graph. Be sure to include in your description how the graph points seem to lie with respect to the straight line that comes as close as possible, on the average, to the three points.
......!!!!!!!!...................................
RESPONSE --> the graph of acceleration vs ramp slope with acceleration as thevertical axis and ramp slope as the horizontal axis, initial acceleration and slope = 0, the graph is curved so that it increases at a increasing rate, indicating that the acceleration icreases more quickly as the slope of the ramp increases. This bothered me at first, since I know that acceleration due to gravity is a constant (until terminal velocity anyway) so, I assumed that the increase in acceleration should decrease. However, then I realized that 25 cm/s^2 is a VERY low number compared to 980 cm/s^2, so...........
.................................................
......!!!!!!!!...................................
13:37:49 The graph will have acceleration in cm/s^2 on the vertical axis (the traditional y-axis) and ramp slope on the horizontal axis (the traditional x-axis). The graph points will be (.01, 4 cm/s^2), (.02, 11.1 cm/s^2), (.03, 25 cm/s^2). The second point lies somewhat lower than a line connecting the first and third points, so the best possible line will probably be lower than the first and third points but higher than the second. The graph indicates that acceleration increases with increasing slope, which should be no surprise. It is not clear from the graph whether a straight line is in fact the most appropriate model for the data. If timing wasn't particularly accurate, these lines could easily be interpreted as being scattered from the actual linear behavior due to experimental errors. Or the graph could indicate acceleration vs. ramp slope behavior that is increasing at an increasing rate.
......!!!!!!!!...................................
RESPONSE --> I forgot to do a straight line analysis.....
.................................................
......!!!!!!!!...................................
16:24:40 `q004. Carefully done experiments show that for small slopes (up to a slope of about .1) the graph appears to be linear or very nearly so. This agrees with theoretical predictions of what should happen. Sketch a vertical line at x = .05. Then extend the straight line you sketched previously until it intersects the y axis and until it reaches past the vertical line at x = .05. What are the coordinates of the points where this line intersects the y-axis, and where it intersects the x =.05 line? What are the rise and the run between these points, and what therefore is the slope of your straight line?
......!!!!!!!!...................................
RESPONSE --> By extending my best fit line, I get an intersection with ramp slope .05 cm at y = 42 cm/s^2, and a y axis intercept at -7 cm /s/s. this gives me a difference of 49 cm /s^2 over a .05 cm/cm ramp slope change ging me a slope of 980 cm^2/cms^2
.................................................
......!!!!!!!!...................................
17:14:10 A pretty good straight line goes through the points (0, -6 cm/s^2) and (.05, 42 cm/s^2). Your y coordinates might differ by a few cm/s^2 either way. For the coordinates given here, the rise is from -6 cm/s^2 to 42 cm/s^2, a rise of 48 cm/s^2. The run is from 0 to .05, a run of .05. The slope of the straight line is approximately 48 cm/s^2 / .05 = 960 cm/s^2. Note that this is pretty close to the accepted value, 980 cm/second^2, of gravity. Carefully done, this experiment will give us a very good estimate of the acceleration of gravity.
......!!!!!!!!...................................
RESPONSE --> I didn't reduce my fraction entirely..........
.................................................
......!!!!!!!!...................................
17:39:56 `q005. The most accurate way to measure the acceleration of gravity is to use the relationship T = 2 `pi / `sqrt(g) * `sqrt(L) for the period of a pendulum. Use your washer pendulum and time 100 complete back-and-forth cycles of a pendulum of length 30 cm. Be sure to count carefully and don't let the pendulum swing out to a position more than 10 degrees from vertical. How long did it take, and how long did each cycle therefore last?
......!!!!!!!!...................................
RESPONSE --> 122 seconds for 100 swings--- 1.22 seconds per cycle
.................................................
......!!!!!!!!...................................
19:23:12 `q006. You now have values for the period T and the length L, so you can use the relationship T = 2 `pi / `sqrt(g) * `sqrt(L) to find the acceleration g of gravity. Solve the equation for g and then use your values for T and L to determine the acceleration of gravity.
......!!!!!!!!...................................
RESPONSE --> t= 1.08 sec/cycle l = 30 cm t= 2pi/ sqrt(g) * sqrt(l) T/(sqrt L) = 2pi/(sqrt g) sqrt g * (T/sqrt L) = 2pi sqrt g= 2pi(sqrt L/T) g= (2 pi * (sqrt L)/T)^2 g= (2 pi * (sqrt (30))/1.08s/c)^2 g= (6.28* (5.48cm/1.08s/c)^2 g= (31.85)^2= 1014.4 cm/s^2
.................................................
......!!!!!!!!...................................
19:23:45 Solving T = 2 `pi / `sqrt(g) * `sqrt(L) for g, we can first multiply both sides by `sqrt(g) to obtain T * `sqrt(g) = 2 `pi `sqrt(L). Then dividing both sides by T we obtain `sqrt(g) = 2 `pi `sqrt(L) / T. Squaring both sides we finally obtain {}g = 4 `pi^2 L / T^2. Plugging in the values given here, L = 30 cm and T = 1.08 sec, we obtain g = 4 `pi^2 * 30 cm / (1.08 sec)^2 = 1030 cm/s^2. You should check these calculations for accuracy, since they were mentally approximated.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
"