********************************************* Question: What do the coordinates of two points on a graph of position vs. clock time tell you about the motion of the object? What can you reason out once you have these coordinates? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: If those points are at those certain coordinates at that specific time it tells you where the position and clock time at that specific time are. confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: The coordinates a point on the graph include a position and a clock time, which tells you where the object whose motion is represented by the graph is at a given instant. If you have two points on the graph, you know the position and clock time at two instants. Given two points on a graph you can find the rise between the points and the run. On a graph of position vs. clock time, the position is on the 'vertical' axis and the clock time on the 'horizontal' axis. • The rise between two points represents the change in the 'vertical' coordinate, so in this case the rise represents the change in position. • The run between two points represents the change in the 'horizontal' coordinate, so in this case the run represents the change in clock time. The slope between two points of a graph is the 'rise' from one point to the other, divided by the 'run' between the same two points. • The slope of a position vs. clock time graph therefore represents rise / run = (change in position) / (change in clock time). • By the definition of average velocity as the average rate of change of position with respect to clock time, we see that average velocity is vAve = (change in position) / (change in clock time). • Thus the slope of the position vs. clock time graph represents the average velocity for the interval between the two graph points. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): I left out a lot of the information that the instructor gave about the rise and run and the two different coordinates. I know a little bit about that but some of it I am confused about. The two graph points confuse me somewhat but I’m pretty familiar with the rise and run. ------------------------------------------------ Self-critique Rating: 3 ********************************************* Question: Pendulums of lengths 20 cm and 25 cm are counted for one minute. The counts are respectively 69 and 61. To how many significant figures do we know the difference between these counts? YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your Solution: 2
.............................................
Given Solution: The greatest mountain height is a bit less than 10 000 meters. The diameter of the Earth is a bit less than 13 000 kilometers. Using the round figures 10 000 meters and 10 000 kilometers, we estimate that the ratio is 10 000 meters / (10 000 kilometers). We could express 10 000 kilometers in meters, or 10 000 meters in kilometers, to actually calculate the ratio. Or we can just see that the ratio reduces to meters / kilometers. Since a kilometer is 1000 meters, the ratio is 1 / 1000. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): So I did need to find the greatest mountain height and the diameter of the Earth. I didn’t know how to do this or realize that you needed to calculate a ration and reduce them to come up with a 1/1000 m/km fraction. ------------------------------------------------ Self-critique Rating: 3 ********************************************* Question: `qQuery Principles of Physics and General College Physics: Summarize your solution to the following: Find the sum 1.80 m + 142.5 cm + 5.34 * 10^5 `micro m to the appropriate number of significant figures. YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: We have to change all of the units to meters to be able to add them. So we have 1.80 m and then 142.5 cm = 1.4250 m and 5.34 * 10^5 = 534,000 micro m, which would be 0.53400 m. So if you were to add all of these up, it would give you a total of 3.759 m. confidence rating #$&*: 2 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: `a** 1.80 m has three significant figures (leading zeros don't count, neither to trailing zeros unless there is a decimal point; however zeros which are listed after the decimal point are significant; that's the only way we have of distinguishing, say, 1.80 meter (read to the nearest .01 m, i.e., nearest cm) and 1.000 meter (read to the nearest millimeter). Therefore no measurement smaller than .01 m can be distinguished. 142.5 cm is 1.425 m, good to within .00001 m. 5.34 * `micro m means 5.34 * 10^-6 m, so 5.34 * 10^5 micro m means (5.34 * 10^5) * 10^-6 meters = 5.34 + 10^-1 meter, or .534 meter, accurate to within .001 m. Then theses are added you get 3.759 m; however the 1.80 m is only good to within .01 m so the result is 3.76 m. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): I must have had my rounding or something a little off because I was within 0.02 off from the instructors answer, but I did everything the same as he did. ********************************************* Question: For University Physics students: Summarize your solution to Problem 1.31 (10th edition 1.34) (4 km on line then 3.1 km after 45 deg turn by components, verify by scaled sketch). YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY Your solution: confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.............................................
Given Solution: `a** THE FOLLOWING CORRECT SOLUTION WAS GIVEN BY A STUDENT: The components of vectors A (2.6km in the y direction) and B (4.0km in the x direction) are known. We find the components of vector C(of length 3.1km) by using the sin and cos functions. Cx was 3.1 km * cos(45 deg) = 2.19. Adding the x component of the second vector, 4.0, we get 6.19km. Cy was 2.19 and i added the 2.6 km y displacement of the first vector to get 4.79. So Rx = 6.19 km and Ry = 4.79 km. To get vector R, i used the pythagorean theorem to get the magnitude of vector R, which was sqrt( (6.29 km)^2 + (4.79 km)^2 ) = 7.9 km. The angle is theta = arctan(Ry / Rx) = arctan(4.79 / 6.19) = 37.7 degrees. ** &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Self-critique (if necessary): ------------------------------------------------ Self-critique Rating: ********************************************* Question: A ball rolls from rest down a book, off that book and smoothly onto another book, where it picks up additional speed before rolling off the end of that book. Suppose you know all the following information: • How far the ball rolled along each book. • The time interval the ball requires to roll from one end of each book to the other. • How fast the ball is moving at each end of each book. • The acceleration on each book is uniform. How would you use your information to determine the clock time at each of the three points (top of first book, top of second which is identical to the bottom of the first, bottom of second book), if we assume the clock started when the ball was released at the 'top' of the first book? How would you use your information to sketch a graph of the ball's position vs. clock time? (This question is more challenging that the others): How would you use your information to sketch a graph of the ball's speed vs. clock time, and how would this graph differ from the graph of the position? confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ You would take the certain distances covered and divide them by the time it took the ball to roll from one end to the other, depending on what point of clock time you were looking for, to find your answer. You could then take the positions (or the times measured) and the clock times you found and plot them on a graph. To find the average of the ball’s speed you would need to take the distance and divide it by the time. So, after finding these averages you would then sketch these points out on a graph as you did above. But, since this is an average of the two intervals then the slope for this graph would probably not look as steep as the one on the other graph. " Self-critique (if necessary): ------------------------------------------------ Self-critique rating: ********************************************* Question: A ball rolls from rest down a book, off that book and smoothly onto another book, where it picks up additional speed before rolling off the end of that book. Suppose you know all the following information: • How far the ball rolled along each book. • The time interval the ball requires to roll from one end of each book to the other. • How fast the ball is moving at each end of each book. • The acceleration on each book is uniform. How would you use your information to determine the clock time at each of the three points (top of first book, top of second which is identical to the bottom of the first, bottom of second book), if we assume the clock started when the ball was released at the 'top' of the first book? How would you use your information to sketch a graph of the ball's position vs. clock time? (This question is more challenging that the others): How would you use your information to sketch a graph of the ball's speed vs. clock time, and how would this graph differ from the graph of the position? confidence rating #$&*: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ You would take the certain distances covered and divide them by the time it took the ball to roll from one end to the other, depending on what point of clock time you were looking for, to find your answer. You could then take the positions (or the times measured) and the clock times you found and plot them on a graph. To find the average of the ball’s speed you would need to take the distance and divide it by the time. So, after finding these averages you would then sketch these points out on a graph as you did above. But, since this is an average of the two intervals then the slope for this graph would probably not look as steep as the one on the other graph. " Self-critique (if necessary): ------------------------------------------------ Self-critique rating: #*&!