Phy 231
Your 'cq_1_20.1' report has been received. Scroll down through the document to see any comments I might have inserted, and my final comment at the end.
** **
The metal strap used in the Angular Velocity of a Strap experiment is constrained by a vertical push pin to rotate about a hole in a die. The die is glued in place to a massive tabletop. A rubber band is attached to a point 15 cm from the axis and stretched so that it exerts a force of 3 Newtons, directed perpendicular to the rod. If this force is unopposed it will accelerate the system rapidly. You want to attach a second rubber band 5 cm from the axis to prevent the system from rotating.
• How much force will that rubber band have to exert?
answer/question/discussion: ->->->->->->->->->->->-> :
15cm/5cm=3
So it needs to be 3 times as great 9N
#$&*
• Once both of these forces are in place and the system is stationary, what (if anything) will happen if the glue holding the die to the tabletop comes loose?
answer/question/discussion: ->->->->->->->->->->->-> :
the Fnet is 12N so I would assume if it comes unlose the end with 9N may cause a twisting effect on the bar to achieve a equilibrium
#$&*
** **
10 mins
** **
7/11 9:45
&#See any notes I might have inserted into your document. If there are no notes, this does not mean that your solution is completely correct.
Then please compare your solutions with the expanded discussion at the link
Solution
Self-critique your solutions, if this is necessary, according to the usual criteria. Insert any revisions, questions, etc. into a copy of this posted document. Mark any insertions with &&&& so they can be easily identified.If your solution is completely consistent with the given solution, you need do nothing further with this problem. &#
&#No revision is necessary unless you have a question, or something you want me to review. &#