course mth 163 ?????~????????assignment #001
......!!!!!!!!...................................
10:20:13 `q001. You should copy and paste these instructions to a word processor for reference. However you can always view them, as well as everything else that has appeared in this box, by clicking the 'Display Everything' button. 1. For the next question or answer, you click on 'Next Question / Answer' button above the box at top left until a question has been posed. Once a question has been posed you are to answer before you click again on this button. 2. Before clicking for an answer, type your best answer to the current question into the box to the right, then clip on the 'Enter Answer' button. 3. After entering your answer you will click on 'Next Question / Answer' to view the answer to the question. Do not tamper with the information displayed in the left-hand box. 4. If your answer was incorrect, incomplete or would otherwise require revision, you will enter a self-critique. If you learned something from the answer, you need to restate it in your own words in order to reinforce your learning. If there is something you feel you should note for future reference, you should make a note in your own words. Go to the response box (the right-hand box) and type in a self-critique and/or notes, as appropriate. Do not copy and paste anything from the left-hand box, since that information will be saved in any case. 5. If you wish to save your response to your Notes file you may choose to click on the 'Save As Notes' button rather than the 'Enter Answer' button. Doing so will save your work for your future reference. Your work will be saved in a Notes file in the c:\vhmthphy folder. The title of the Notes file will also include the name you gave when you started the program. 6. After clicking either the 'Enter Response' or the 'Save as Notes' button, click on 'Next Question / Answer' and proceed in a similar manner. In the right-hand box briefly describe your understanding of these instructions, then click 'Enter Answer'.
......!!!!!!!!...................................
RESPONSE --> press next question, go to the response box type in the answer, hit enter, check answer, type critique confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:20:39 Your answer has been noted. Enter 'ok' in the Response Box and click on Enter Response, then click on Next Question/Answer for the first real question.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:21:36 `q002. Note that there are 10 questions in this assignment. The questions are of increasing difficulty--the first questions are fairly easy but later questions are very tricky. The main purposes of these exercises are to refine your thinking about rates, and to see how you process challenging information. Continue as far as you can until you are completely lost. Students who are prepared for the highest-level math courses might not ever get lost. If you make $50 in 5 hr, then at what rate are you earning money?
......!!!!!!!!...................................
RESPONSE --> 5*10=50 $10 confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:22:49 The rate at which you are earning money is the number of dollars per hour you are earning. You are earning money at the rate of 50 dollars / (5 hours) = 10 dollars / hour. It is very likely that you immediately came up with the $10 / hour because almosteveryone is familiar with the concept of the pay rate, the number of dollars per hour. Note carefully that the pay rate is found by dividing the quantity earned by the time required to earn it. Time rates in general are found by dividing an accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> divide to explain confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:23:36 `q003.If you make $60,000 per year then how much do you make per month?
......!!!!!!!!...................................
RESPONSE --> 60000/12= $5000 confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:29:09 Small businesses do not usually make the same amount of money every month. The amount made depends on the demand for the services or commodities provided by the business, and there are often seasonal fluctuations in addition to other market fluctuations. It is almost certain that a small business making $60,000 per year will make more than $5000 in some months and less than $5000 in others. Therefore it is much more appropriate to say that the business makes and average of $5000 per month. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> I understand average confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:30:13 `q005. If you travel 300 miles in 6 hours, at what average rate are you covering distance, and why do we say average rate instead of just plain rate?
......!!!!!!!!...................................
RESPONSE --> 300/6=50mph average because the speed will vary confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:30:48 The average rate is 50 miles per hour, or 50 miles / hour. This is obtained by dividing the accumulated quantity, the 300 miles, by the time required to accumulate it, obtaining ave rate = 300 miles / ( 6 hours) = 50 miles / hour. Note that the rate at which distance is covered is called speed. The car has an average speed of 50 miles/hour. We say 'average rate' in this case because it is almost certain that slight changes in pressure on the accelerator, traffic conditions and other factors ensure that the speed will sometimes be greater than 50 miles/hour and sometimes less than 50 miles/hour; the 50 miles/hour we obtain from the given information is clearly and overall average of the velocities. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:31:56 `q006. If you use 60 gallons of gasoline on a 1200 mile trip, then at what average rate are you using gasoline, with respect to miles traveled?
......!!!!!!!!...................................
RESPONSE --> 60/1200=0.05 gal/mile confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:32:09 The rate of change of one quantity with respect to another is the change in the first quantity, divided by the change in the second. As in previous examples, we found the rate at which money was made with respect to time by dividing the amount of money made by the time required to make it. By analogy, the rate at which we use fuel with respect to miles traveled is the change in the amount of fuel divided by the number of miles traveled. In this case we use 60 gallons of fuel in 1200 miles, so the average rate it 60 gal / (1200 miles) = .05 gallons / mile. Note that this question didn't ask for miles per gallon. Miles per gallon is an appropriate and common calculation, but it measures the rate at which miles are covered with respect to the amount of fuel used. Be sure you see the difference. Note that in this problem we again have here an example of a rate, but unlike previous instances this rate is not calculated with respect to time. This rate is calculated with respect to the amount of fuel used. We divide the accumulated quantity, in this case miles, by the amount of fuel required to cover those miles. Note that again we call the result of this problem an average rate because there are always at least subtle differences in driving conditions that require the use of more fuel on some miles than on others. It's very important to understand the phrase 'with respect to'. Whether the calculation makes sense or not, it is defined by the order of the terms. In this case gallons / mile tells you how many gallons you are burning, on the average, per mile. This concept is not as familiar as miles / gallon, but except for familiarity it's technically no more difficult. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:33:05 `q007. The word 'average' generally connotes something like adding two quantities and dividing by 2, or adding several quantities and dividing by the number of quantities we added. Why is it that we are calculating average rates but we aren't adding anything?
......!!!!!!!!...................................
RESPONSE --> we are already past the adding and to the division part confidence assessment: 2
.................................................
......!!!!!!!!...................................
10:33:41 The word 'average' in the context of the dollars / month, miles / gallon types of questions we have been answering was used because we expect that in different months different amounts were earned, or that over different parts of the trip the gas mileage might have varied, but that if we knew all the individual quantities (e.g., the dollars earned each month, the number of gallons used with each mile) and averaged them in the usual manner, we would get the .05 gallons / mile, or the $5000 / month. In a sense we have already added up all the dollars earned in each month, or the miles traveled on each gallon, and we have obtained the total $60,000 or 1200 miles. Thus when we divide by the number of months or the number of gallons, we are in fact calculating an average rate. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:41:36 `q008. In a study of how lifting strength is influenced by various ways of training, a study group was divided into 2 subgroups of equally matched individuals. The first group did 10 pushups per day for a year and the second group did 50 pushups per day for year. At the end of the year to lifting strength of the first group averaged 147 pounds, while that of the second group averaged 162 pounds. At what average rate did lifting strength increase per daily pushup?
......!!!!!!!!...................................
RESPONSE --> (147/365)/10= .040 lbs per push up /day (162/365)/50= .009 lbs per push up /day confidence assessment: 2
.................................................
......!!!!!!!!...................................
10:42:34 The second group had 15 pounds more lifting strength as a result of doing 40 more daily pushups than the first. The desired rate is therefore 15 pounds / 40 pushups = .375 pounds / pushup. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> I didnt quite get the wording as to what was wanted I see it now confidence assessment: 1
.................................................
......!!!!!!!!...................................
10:46:10 `q009. In another part of the study, participants all did 30 pushups per day, but one group did pushups with a 10-pound weight on their shoulders while the other used a 30-pound weight. At the end of the study, the first group had an average lifting strength of 171 pounds, while the second had an average lifting strength of 188 pounds. At what average rate did lifting strength increase with respect to the added shoulder weight?
......!!!!!!!!...................................
RESPONSE --> 17/20=.85 confidence assessment: 1
.................................................
......!!!!!!!!...................................
10:47:58 The difference in lifting strength was 17 pounds, as a result of a 20 pound difference in added weight. The average rate at which strength increases with respect added weight would therefore be 17 lifting pounds / (20 added pounds) = .85 lifting pounds / added pound. The strength advantage was .85 lifting pounds per pound of added weight, on the average. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> I understand the solution the wording in the problem gets me sometimes I understand the .85 pounds advantage confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:50:51 `q010. During a race, a runner passes the 100-meter mark 12 seconds after the start and the 200-meter mark 22 seconds after the start. At what average rate was the runner covering distance between those two positions?
......!!!!!!!!...................................
RESPONSE --> (22-12)/100=.01 meter / sec U did mean between the 100 and 200 m points? confidence assessment: 2
.................................................
......!!!!!!!!...................................
10:51:54 The runner traveled 100 meters between the two positions, and required 10 seconds to do so. The average rate at which the runner was covering distance was therefore 100 meters / (10 seconds) = 10 meters / second. Again this is an average rate; at different positions in his stride the runner would clearly be traveling at slightly different speeds. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> I got it now! confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:55:40 `q011. During a race, a runner passes the 100-meter mark moving at 10 meters / second, and the 200-meter mark moving at 9 meters / second. What is your best estimate of how long it takes the runner to cover the 100 meter distance?
......!!!!!!!!...................................
RESPONSE --> (10+9)/2= 9.5meters /sec 100/9.5= 10.53 sec confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:56:44 At 10 meters/sec, the runner would require 10 seconds to travel 100 meters. However the runner seems to be slowing, and will therefore require more than 10 seconds to travel the 100 meters. We don't know what the runner's average speed is, we only know that it goes from 10 m/s to 9 m/s. The simplest estimate we could make would be that the average speed is the average of 10 m/s and 9 m/s, or (10 m/s + 9 m/s ) / 2 = 9.5 m/s. Taking this approximation as the average rate, the time required to travel 100 meters will be (100 meters) / (9.5 m/s) = 10.5 sec, approx.. Note that simply averaging the 10 m/s and the 9 m/s might not be the best way to approximate the average rate--for example we if we knew enough about the situation we might expect that this runner would maintain the 10 m/s for most of the remaining 100 meters, and simply tire during the last few seconds. However we were not given this information, and we don't add extraneous assumptions without good cause. So the approximation we used here is pretty close to the best we can do with the given information. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> getting easier confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:57:33 `q012. We just averaged two quantities, adding them in dividing by 2, to find an average rate. We didn't do that before. Why we do it now?
......!!!!!!!!...................................
RESPONSE --> because we have 2 quantites which we didnt before confidence assessment: 3
.................................................
......!!!!!!!!...................................
10:58:11 In previous examples the quantities weren't rates. We were given the amount of change of some accumulating quantity, and the change in time or in some other quantity on which the first was dependent (e.g., dollars and months, miles and gallons). Here we are given 2 rates, 10 m/s and 9 m/s, in a situation where we need an average rate in order to answer a question. Within this context, averaging the 2 rates was an appropriate tactic. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> i could have put more detail but I understood it confidence assessment: 3
.................................................
????T????U????I?assignment #002 002. Volumes qa areas volumes misc 06-09-2007
......!!!!!!!!...................................
11:02:49 `q001. There are 9 questions and 4 summary questions in this assignment. What is the volume of a rectangular solid whose dimensions are exactly 3 cm by 5 cm by 7 cm?
......!!!!!!!!...................................
RESPONSE --> 3*5*7=105 cubic cm confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:03:58 If we orient this object so that its 3 cm dimension is its 'height', then it will be 'resting' on a rectangular base whose dimension are 5 cm by 7 cm. This base can be divided into 5 rows each consisting of 7 squares, each 1 meter by 1 meter. There will therefore be 5 * 7 = 35 such squares, showing us that the area of the base is 35 m^2. Above each of these base squares the object rises to a distance of 3 meters, forming a small rectangular tower. Each such tower can be divided into 3 cubical blocks, each having dimension 1 meter by 1 meter by 1 meter. The volume of each 1-meter cube is 1 m * 1 m * 1 m = 1 m^3, also expressed as 1 cubic meter. So each small 'tower' has volume 3 m^3. The object can be divided into 35 such 'towers'. So the total volume is 35 * 3 m^3 = 105 m^3. This construction shows us why the volume of a rectangular solid is equal to the area of the base (in this example the 35 m^2 of the base) and the altitude (in this case 3 meters). The volume of any rectangular solid is therefore V = A * h, where A is the area of the base and h the altitude. This is sometimes expressed as V = L * W * h, where L and W are the length and width of the base. However the relationship V = A * h applies to a much broader class of objects than just rectangular solids, and V = A * h is a more powerful idea than V = L * W * h. Remember both, but remember also that V = A * h is the more important.
......!!!!!!!!...................................
RESPONSE --> got it self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:05:39 Using the idea that V = A * h we find that the volume of this solid is V = A * h = 48 m^2 * 2 m = 96 m^3. Note that m * m^2 means m * (m * m) = m * m * m = m^2.
......!!!!!!!!...................................
RESPONSE --> ok m^3 self critique assessment: 0
.................................................
......!!!!!!!!...................................
11:09:51 V = A * h applies to uniform cylinders as well as to rectangular solids. We are given the altitude h and the base area A so we conclude that V = A * h = 20 m^2 * 40 m = 800 m^3. The relationship V = A * h applies to any solid object whose cross-sectional area A is constant. This is the case for uniform cylinders and uniform prisms.
......!!!!!!!!...................................
RESPONSE --> this and the previos problems I hit the next question instead of response i completely understood them and just hit the wrong button 20*40 =800 m^3 was my answer self critique assessment: 2
.................................................
......!!!!!!!!...................................
11:13:10 `q004. What is the volume of a uniform cylinder whose base has radius 5 cm and whose altitude is 30 cm?
......!!!!!!!!...................................
RESPONSE --> (3.14*5^2)30=2355 cm^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:16:42 The cylinder is uniform, which means that its cross-sectional area is constant. So the relationship V = A * h applies. The cross-sectional area A is the area of a circle of radius 5 cm, so we see that A = pi r^2 = pi ( 5 cm)^2 = 25 pi cm^2. Since the altitude is 30 cm the volume is therefore V = A * h = 25 pi cm^2 * 30 cm = 750 pi cm^3. Note that the common formula for the volume of a uniform cylinder is V = pi r^2 h. However this is just an instance of the formula V = A * h, since the cross-sectional area A of the uniform cylinder is pi r^2. Rather than having to carry around the formula V = pi r^2 h, it's more efficient to remember V = A * h and to apply the well-known formula A = pi r^2 for the area of a circle.
......!!!!!!!!...................................
RESPONSE --> ok so you leave pi as part of the solution self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:21:25 `q005. Estimate the dimensions of a metal can containing food. What is its volume, as indicated by your estimates?
......!!!!!!!!...................................
RESPONSE --> the can is 3"" diameter x 5"" tall the radius is 1.5"" V= (pi*1.5^2)5 67.5 pi=volume V=A*h confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:26:20 People will commonly estimate the dimensions of a can of food in centimeters or in inches, though other units of measure are possible (e.g., millimeters, feet, meters, miles, km). Different cans have different dimensions, and your estimate will depend a lot on what can you are using. A typical can might have a circular cross-section with diameter 3 inches and altitude 5 inches. This can would have volume V = A * h, where A is the area of the cross-section. The diameter of the cross-section is 3 inches so its radius will be 3/2 in.. The cross-sectional area is therefore A = pi r^2 = pi * (3/2 in)^2 = 9 pi / 4 in^2 and its volume is V = A * h = (9 pi / 4) in^2 * 5 in = 45 pi / 4 in^3. Approximating, this comes out to around 35 in^3. Another can around the same size might have diameter 8 cm and height 14 cm, giving it cross-sectional area A = pi ( 4 cm)^2 = 16 pi cm^2 and volume V = A * h = 16 pi cm^2 * 14 cm = 224 pi cm^2.
......!!!!!!!!...................................
RESPONSE --> I cant believe it is the same can and i got it wrong, how does pi*(3/2 in)^2=9pi/4? self critique assessment: 1
.................................................
......!!!!!!!!...................................
11:29:17 `q006. What is the volume of a pyramid whose base area is 50 square cm and whose altitude is 60 cm?
......!!!!!!!!...................................
RESPONSE --> A=1/2bh (1/2*50)60=1500 m^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:30:47 We can't use the V = A * h idea for a pyramid because the thing doesn't have a constant cross-sectional area--from base to apex the cross-sections get smaller and smaller. It turns out that there is a way to cut up and reassemble a pyramid to show that its volume is exactly 1/3 that of a rectangular solid with base area A and altitude h. Think of putting the pyramid in a box having the same altitude as the pyramid, with the base of the pyramid just covering the bottom of the box. The apex (the point) of the pyramid will just touch the top of the box. The pyramid occupies exactly 1/3 the volume of that box. So the volume of the pyramid is V = 1/3 * A * h. The base area A is 30 cm^2 and the altitude is 60 cm so we have V = 1/3 * 50 cm^2 * 60 cm = 1000 cm^3.
......!!!!!!!!...................................
RESPONSE --> wrong formula I got it 1/3 the volume self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:36:43 `q007. What is the volume of a cone whose base area is 20 square meters and whose altitude is 9 meters?
......!!!!!!!!...................................
RESPONSE --> v=1/3A*h 1/3*20*9=60m^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:37:04 Just as the volume of a pyramid is 1/3 the volume of the 'box' that contains it, the volume of a cone is 1/3 the volume of the cylinder that contains it. Specifically, the cylinder that contains the cone has the base of the cone as its base and matches the altitude of the cone. So the volume of the cone is 1/3 A * h, where A is the area of the base and h is the altitude of the cone. In this case the base area and altitude are given, so the volume of the cone is V = 1/3 A * h = 1/3 * 20 m^2 * 9 m = 60 m^3.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
11:41:25 `q008. What is a volume of a sphere whose radius is 4 meters?
......!!!!!!!!...................................
RESPONSE --> V=4/3pi*r^3 4/3(3.14)4^3= 268.08 confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:44:26 The volume of a sphere is V = 4/3 pi r^3, where r is the radius of the sphere. In this case r = 4 m so V = 4/3 pi * (4 m)^3 = 4/3 pi * 4^3 m^3 = 256/3 pi m^3.
......!!!!!!!!...................................
RESPONSE --> i need to remember the format i see it now 64/1*4/3=256/3pi self critique assessment: 2
.................................................
......!!!!!!!!...................................
11:49:28 `q009. What is the volume of a planet whose diameter is 14,000 km?
......!!!!!!!!...................................
RESPONSE --> V=4/3pir^3 4/3pi*7000^3= 4/3*3,430,000,000*pi= 13720000000/3 pi km^3 confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:49:52 The planet is presumably a sphere, so to the extent that this is so the volume of this planet is V = 4/3 pi r^3, where r is the radius of the planet. The diameter of the planet is 14,000 km so the radius is half this, or 7,000 km. It follows that the volume of the planet is V = 4/3 pi r^3 = 4/3 pi * (7,000 km)^3 = 4/3 pi * 343,000,000,000 km^3 = 1,372,000,000,000 / 3 * pi km^3. This result can be approximated to an appropriate number of significant figures.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:51:09 `q010. Summary Question 1: What basic principle do we apply to find the volume of a uniform cylinder of known dimensions?
......!!!!!!!!...................................
RESPONSE --> the area of the base times the hight confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:51:26 The principle is that when the cross-section of an object is constant, its volume is V = A * h, where A is the cross-sectional area and h the altitude. Altitude is measure perpendicular to the cross-section.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:52:17 `q011. Summary Question 2: What basic principle do we apply to find the volume of a pyramid or a cone?
......!!!!!!!!...................................
RESPONSE --> one third the volume if it were a box confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:52:31 The volumes of these solids are each 1/3 the volume of the enclosing figure. Each volume can be expressed as V = 1/3 A * h, where A is the area of the base and h the altitude as measured perpendicular to the base.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 3
.................................................
......!!!!!!!!...................................
11:53:44 `q012. Summary Question 3: What is the formula for the volume of a sphere?
......!!!!!!!!...................................
RESPONSE --> 4/3pi*r^3 for thirds the radius cubed times pi confidence assessment: 3
.................................................
......!!!!!!!!...................................
11:53:56 The volume of a sphere is V = 4/3 pi r^3, where r is the radius of the sphere.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 2
.................................................
......!!!!!!!!...................................
11:55:17 `q013. Explain how you have organized your knowledge of the principles illustrated by the exercises in this assignment.
......!!!!!!!!...................................
RESPONSE --> according to shapes and there associations with area and height confidence assessment: 3
.................................................
"