course Phy 201 ûßðJÿ¥OæSµ£¿¤Á™ç_€½…Ó¹£®ž¸ž”üØŸassignment #018
......!!!!!!!!...................................
11:50:34 Query intro problem sets Explain how we determine the horizontal range of a projectile given its initial horizontal and vertical velocities and the vertical displacement.
......!!!!!!!!...................................
RESPONSE --> to find horizontal range you could take the vertical velocities and the inital horizontal and subtract the two and divide by the displacement to get the horizontal range. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:52:30 ** We treat the vertical and horizontal quantities independently. We are given vertical displacement and initial velocity and we know that the vertical acceleration is the acceleration of gravity. So we solve the vertical motion first, which will give us a `dt with which to solve the horizontal motion. We first determine the final vertical velocity using the equation vf^2 = v0^2 + 2a'ds, then average the result with the initial vertical velocity. We divide this into the vertical displacement to find the elapsed time. We are given the initial horizontal velocity, and the fact that for an ideal projectile the only force acting on it is vertical tells us that the acceleration in the horizontal direction is zero. Knowing `dt from the analysis of the vertical motion we can now solve the horizontal motion for `ds. This comes down to multiplying the constant horizontal velocity by the time interval `dt. **
......!!!!!!!!...................................
RESPONSE --> I understand that first you need to solve for vertical motion by taking a * dt and then you can find the final vertical velocity by using the equation vf^2 = v0^2 + 2a'ds, then average the result with the initial vertical velocity then you can divide this into the vertical displacement to find the elapsed time and assuming that a in the horizontal direction is 0. self critique assessment: 2
.................................................
......!!!!!!!!...................................
11:54:55 Query class notes #17 Why do we expect that in a collision of two objects the momentum change of each object must be equal and opposite to that of the other?
......!!!!!!!!...................................
RESPONSE --> They must be equal and opposite to each other because in the collision they must have the same momentum going into the collision, and they have to be opposite at the same time and therefore one will be negative and the other will be positive. confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:56:04 **COMMON ERROR AND INSTRUCTION CORRECTION: This is because the KE change is going to be equal to the PE change. Momentum has nothing directly to do with energy. Two colliding object exert equal and opposite forces on one another, resulting in equal and opposite impulses. i.e., F1 `dt = - F2 `dt. The result is that the change in momentum are equal and opposite: `dp1 = -`dp2. So the net momentum change is `dp1 + `dp2 = `dp1 +(-`dp1) = 0. **
......!!!!!!!!...................................
RESPONSE --> I understand that the objects are going to exert equal and opposite forces on one another and that is therefore going to result in equal and opposite impulses and that the change in the momentum are equal and opposite dp1 = -`dp2 and therefore the net momentum change is `dp1 + `dp2 = `dp1 +(-`dp1) = 0 self critique assessment: 2
.................................................
......!!!!!!!!...................................
11:57:37 What are the six quantities in terms of which we analyze the momentum involved in a collision of two objects which, before and after collision, are both moving along a common straight line? How are these quantities related?
......!!!!!!!!...................................
RESPONSE --> the six quantities are dp = Fnet * `dt where fnet = m a confidence assessment: 1
.................................................
......!!!!!!!!...................................
11:59:03 ** We analyze the momentum for such a collision in terms of the masses m1 and m2, the before-collision velocities v1 and v2 and the after-collision velocities v1' and v2'. Total momentum before collision is m1 v1 + m2 v2. Total momentum after collision is m1 v1' + m2 v2'. Conservation of momentum, which follows from the impulse-momentum theorem, gives us m1 v1 + m2 v2 = m1 v1' + m2 v2'. **
......!!!!!!!!...................................
RESPONSE --> I understand that the total momentum before is m1 v1 + m2 v2 and after the collision it is m1 v1' + m2 v2 and these interrelate because due to the impulse momentum theorem it gives us m1 v1 + m2 v2 = m1 v1' + m2 v2 self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:26:49 `1prin phy and gen phy 6.47. RR cars mass 7650 kg at 95 km/hr in opposite directions collide and come to rest. How much thermal energy is produced in the collision?
......!!!!!!!!...................................
RESPONSE --> 7650* 9.8 = 74870 N / 95km/hr = 788
.................................................
......!!!!!!!!...................................
14:29:57 There is no change in PE. All the initial KE of the cars will be lost to nonconservative forces, with nearly all of this energy converted to thermal energy. The initial speed are 95 km/hr * 1000 m/km * 1 hr / 3600 s = 26.4 m/s, so each car has initial KE of .5 m v^2 = .5 * 7650 kg * (26.4 m/s)^2 = 265,000 Joules, so that their total KE is 2 * 265,000 J = 530,000 J. This KE is practially all converted to thermal energy.
......!!!!!!!!...................................
RESPONSE --> I understand that first of all you have to find the inital speed and to get that you take 95 km/hr * 1000 m/km * 1 hr / 3600 s = 26.4 m/s,and therefore each car has initial KE of .5 m v^2 = .5 * 7650 kg * (26.4 m/s)^2 = 265,000 Joules, so that their total KE is 2 * 265,000 J = 530,000 J self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:37:24 `1Query* gen phy roller coaster 1.7 m/s at point 1, ave frict 1/5 wt, reaches poin 28 m below at what vel (`ds = 45 m along the track)?
......!!!!!!!!...................................
RESPONSE --> i used the equation vf^2 = v0^2 + 2a ds therefore, 28^2 = v0^2 + 2 (9.8) 45m = 784 = v0^2 + 882 therefore, square root of (784/882) = v0 = .94
.................................................
......!!!!!!!!...................................
14:41:45 **GOOD STUDENT SOLUTION WITH ERROR IN ONE DETAIL, WITH INSTRUCTOR CORRECTION: Until just now I did not think I could work that one, because I did not know the mass, but I retried it. Conservation of energy tells us that `dKE + `dPE + `dWnoncons = 0. PE is all gravitational so that `dPE = (y2 - y1). The only other force acting in the direction of motion is friction. Thus .5 M vf^2 - .5 M v0^2 + M g (y2 - y1) + f * `ds = 0 and .5 M vf^2 - .5M(1.7m/s)^2 + M(9.8m/s^2)*(-28 m - 0) + .2 M g (45m) It looks like the M's cancel so I don't need to know mass. .5v2^2 - 1.445 m^2/s^2 - 274 m^2/s^2 + 88 m^2/s^2 = 0 so v2 = +- sqrt( 375 m^2/s^2 ) = 19.3 m/s.
......!!!!!!!!...................................
RESPONSE --> I understand that I do not use the equation that I had, instead I use .5 M vf^2 - .5 M v0^2 + M g (y2 - y1) + f * `ds = 0 then substituting all that I was given in the equation, 5 M vf^2 - .5M(1.7m/s)^2 + M(9.8m/s^2)*(-28 m - 0) + .2 M g (45m) and therefore the M's cancel out leaving me with .5v2^2 - 1.445 m^2/s^2 - 274 m^2/s^2 + 88 m^2/s^2 = 0 and then v2 = +- sqrt( 375 m^2/s^2 ) = 19.3 m/s. self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:41:50 Univ. 7.74 (7.62 in 10th edition). 2 kg pckg, 53.1 deg incline, coeff kin frict .20, 4 m from spring with const 120 N/m. Speed just before hitting spring? How far compressed? How close to init pos on rebound?
......!!!!!!!!...................................
RESPONSE --> okay confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:41:56 ** The forces acting on the package while sliding down the incline, include gravitiational force, normal force and friction; and after encountering the spring the tension force of the spring also acts on the package. The normal force is Fnormal = 2 kg * 9.8 m/s^2 * cos(53.1 deg) = 11.7 N, approx.. This force is equal and opposite to the component of the weight which is perpendicular to the incline. The frictional force is f = .2 * normal force = .2 * 11.7 N = 2.3 N, approx.. The component of the gravitational force down the incline is Fparallel = 2 kg * 9.8 m/s^2 * sin(53.1 deg) = 15.7 N, approx.. Friction acts in the direction opposite motion, up the incline in this case. If we choose the downward direction as positive the net force on the package is therefore 15.7 N - 2.3 N = 13.4 N. So in traveling 4 meters down the incline the work done on the system by the net force is 13.4 N * 4 m = 54 Joules approx. Just before hitting the spring we therefore have .5 m v^2 = KE so v = +-sqrt(2 * KE / m) = +-sqrt(2 * 54 J / (2 kg) ) = +- 7.4 m/s. If we ignore the gravitational and frictional forces on the object while the spring is compressed, which we really don't want to do, we would conclude the spring would be compressed until its elastic PE was equal to the 54 J of KE which is lost when the object comes to rest. The result we would get here by setting .5 k x^2 equal to the KE loss is x = sqrt(2 * KE / k) = .9 meters, approx.. However we need to include gravitational and frictional forces. So we let x stand for the distance the spring is compressed. As the object moves the distance x its KE decreases by 54 Joules, its gravitational PE decreases by Fparallel * x, the work done against friction is f * x (where f is the force of friction), and the PE gained by the spring is .5 k x^2. So we have `dKE + `dPE + `dWnoncons = 0 so -54 J - 15.7N * x + .5 * 120 N/m * x^2 + 2.3 N * x = 0 which gives us the quadratic equation 60 N/m * x^2 - 13.4 N * x - 54 N m = 0. (note that if x is in meters every term has units N * m). Suppressing the units and solving for x using the quadratic formula we have x = ( - (-13.4) +- sqrt(13.4^2 - 4 * 60 (-54) ) / ( 2 * 60) = 1.03 or -.8 meaning 1.07 m or -.8 m (see previous note on units). We reject the negative result since the object will continue to move in the direction down the incline, and conclude that the spring would compress over 1 m as opposed to the .9 m obtained if gravitational and frictional forces are not accounted for during the compression. This makes sense because we expect the weight of the object (more precisely the weight component parallel to the incline) to compress the spring more than it would otherwise compress. Another way of seeing this is that the additional gravitational PE loss as well as the KE loss converts into elastic PE. If the object then rebounds the spring PE will be lost to gravitational PE and to work against friction. If the object goes distance xMax back up the incline from the spring's compressed position we will have`dPE = -.5 k x^2 + Fparallel * xMax, `dKE = 0 (velocity is zero at max compression as well as as max displacement up the incline) and `dWnoncons = f * xMax. We obtain `dPE + `dKE + `dWnoncons = 0 so -.5 k x^2 + Fparallel * xMax + 0 + 33 N * xMax = 0 or -.5 * 120 N/m * (1.07 m)^2 + 15.7 N * xMax + 2.3 N * xMax = 0 We obtain 18 N * xMax = 72 N m, approx., so that xMax = 72 N m / (18 N) = 4 meters, approx.. This is only 2.93 meters beyond the position of the object when the spring was compressed. Note that the object started out 4 meters beyond this position. **
......!!!!!!!!...................................
RESPONSE --> okay self critique assessment: 2
.................................................
"