course Phy 121
......!!!!!!!!...................................
20:18:30 `q001. There are 9 questions and 4 summary questions in this assignment. What is the volume of a rectangular solid whose dimensions are exactly 3 cm by 5 cm by 7 cm?
......!!!!!!!!...................................
RESPONSE --> V=l*w*h V=3*5*7 V=105cm^3
.................................................
......!!!!!!!!...................................
20:18:46 If we orient this object so that its 3 cm dimension is its 'height', then it will be 'resting' on a rectangular base whose dimension are 5 cm by 7 cm. This base can be divided into 5 rows each consisting of 7 squares, each 1 meter by 1 meter. There will therefore be 5 * 7 = 35 such squares, showing us that the area of the base is 35 m^2. Above each of these base squares the object rises to a distance of 3 meters, forming a small rectangular tower. Each such tower can be divided into 3 cubical blocks, each having dimension 1 meter by 1 meter by 1 meter. The volume of each 1-meter cube is 1 m * 1 m * 1 m = 1 m^3, also expressed as 1 cubic meter. So each small 'tower' has volume 3 m^3. The object can be divided into 35 such 'towers'. So the total volume is 35 * 3 m^3 = 105 m^3. This construction shows us why the volume of a rectangular solid is equal to the area of the base (in this example the 35 m^2 of the base) and the altitude (in this case 3 meters). The volume of any rectangular solid is therefore V = A * h, where A is the area of the base and h the altitude. This is sometimes expressed as V = L * W * h, where L and W are the length and width of the base. However the relationship V = A * h applies to a much broader class of objects than just rectangular solids, and V = A * h is a more powerful idea than V = L * W * h. Remember both, but remember also that V = A * h is the more important.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:22:02 `q002. What is the volume of a rectangular solid whose base area is 48 square meters and whose altitude is 2 meters?
......!!!!!!!!...................................
RESPONSE --> V=base area*h V=48m^2*2m V=96m^3
.................................................
......!!!!!!!!...................................
20:22:08 Using the idea that V = A * h we find that the volume of this solid is V = A * h = 48 m^2 * 2 m = 96 m^3. Note that m * m^2 means m * (m * m) = m * m * m = m^2.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:23:59 `q003. What is the volume of a uniform cylinder whose base area is 20 square meters and whose altitude is 40 meters?
......!!!!!!!!...................................
RESPONSE --> V=base area*h V=20 m^2*40m V=800m^3
.................................................
......!!!!!!!!...................................
20:24:03 V = A * h applies to uniform cylinders as well as to rectangular solids. We are given the altitude h and the base area A so we conclude that V = A * h = 20 m^2 * 40 m = 800 m^3. The relationship V = A * h applies to any solid object whose cross-sectional area A is constant. This is the case for uniform cylinders and uniform prisms.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:26:16 `q004. What is the volume of a uniform cylinder whose base has radius 5 cm and whose altitude is 30 cm?
......!!!!!!!!...................................
RESPONSE --> V=pi*r^2*h V=pi5^2*30 V=750pi cm^3
.................................................
......!!!!!!!!...................................
20:26:21 The cylinder is uniform, which means that its cross-sectional area is constant. So the relationship V = A * h applies. The cross-sectional area A is the area of a circle of radius 5 cm, so we see that A = pi r^2 = pi ( 5 cm)^2 = 25 pi cm^2. Since the altitude is 30 cm the volume is therefore V = A * h = 25 pi cm^2 * 30 cm = 750 pi cm^3. Note that the common formula for the volume of a uniform cylinder is V = pi r^2 h. However this is just an instance of the formula V = A * h, since the cross-sectional area A of the uniform cylinder is pi r^2. Rather than having to carry around the formula V = pi r^2 h, it's more efficient to remember V = A * h and to apply the well-known formula A = pi r^2 for the area of a circle.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:31:11 `q005. Estimate the dimensions of a metal can containing food. What is its volume, as indicated by your estimates?
......!!!!!!!!...................................
RESPONSE --> height=11 radius=3.5 V=pi*r^2*h V=pi*3.5^2*11 V=134.75 cm^3
.................................................
......!!!!!!!!...................................
20:31:57 People will commonly estimate the dimensions of a can of food in centimeters or in inches, though other units of measure are possible (e.g., millimeters, feet, meters, miles, km). Different cans have different dimensions, and your estimate will depend a lot on what can you are using. A typical can might have a circular cross-section with diameter 3 inches and altitude 5 inches. This can would have volume V = A * h, where A is the area of the cross-section. The diameter of the cross-section is 3 inches so its radius will be 3/2 in.. The cross-sectional area is therefore A = pi r^2 = pi * (3/2 in)^2 = 9 pi / 4 in^2 and its volume is V = A * h = (9 pi / 4) in^2 * 5 in = 45 pi / 4 in^3. Approximating, this comes out to around 35 in^3. Another can around the same size might have diameter 8 cm and height 14 cm, giving it cross-sectional area A = pi ( 4 cm)^2 = 16 pi cm^2 and volume V = A * h = 16 pi cm^2 * 14 cm = 224 pi cm^2.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:34:08 `q006. What is the volume of a pyramid whose base area is 50 square cm and whose altitude is 60 cm?
......!!!!!!!!...................................
RESPONSE --> V=area of base*height*1/3 V=50*60*1/3 V=100cm^3
.................................................
......!!!!!!!!...................................
20:34:13 We can't use the V = A * h idea for a pyramid because the thing doesn't have a constant cross-sectional area--from base to apex the cross-sections get smaller and smaller. It turns out that there is a way to cut up and reassemble a pyramid to show that its volume is exactly 1/3 that of a rectangular solid with base area A and altitude h. Think of putting the pyramid in a box having the same altitude as the pyramid, with the base of the pyramid just covering the bottom of the box. The apex (the point) of the pyramid will just touch the top of the box. The pyramid occupies exactly 1/3 the volume of that box. So the volume of the pyramid is V = 1/3 * A * h. The base area A is 30 cm^2 and the altitude is 60 cm so we have V = 1/3 * 50 cm^2 * 60 cm = 1000 cm^3.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:36:45 `q007. What is the volume of a cone whose base area is 20 square meters and whose altitude is 9 meters?
......!!!!!!!!...................................
RESPONSE --> V=1/3*pi*r^2*h V=1/3*20*9 V=60m^3
.................................................
......!!!!!!!!...................................
20:36:51 Just as the volume of a pyramid is 1/3 the volume of the 'box' that contains it, the volume of a cone is 1/3 the volume of the cylinder that contains it. Specifically, the cylinder that contains the cone has the base of the cone as its base and matches the altitude of the cone. So the volume of the cone is 1/3 A * h, where A is the area of the base and h is the altitude of the cone. In this case the base area and altitude are given, so the volume of the cone is V = 1/3 A * h = 1/3 * 20 m^2 * 9 m = 60 m^3.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:38:27 `q008. What is a volume of a sphere whose radius is 4 meters?
......!!!!!!!!...................................
RESPONSE --> V=4/3*pi*r^3 V=4/3*pi*4^3 V=85.3 pi m^3
.................................................
......!!!!!!!!...................................
20:39:15 The volume of a sphere is V = 4/3 pi r^3, where r is the radius of the sphere. In this case r = 4 m so V = 4/3 pi * (4 m)^3 = 4/3 pi * 4^3 m^3 = 256/3 pi m^3.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:41:40 `q009. What is the volume of a planet whose diameter is 14,000 km?
......!!!!!!!!...................................
RESPONSE --> V=4/3*pi*7,000^3 V=4.57333e11km^3
.................................................
......!!!!!!!!...................................
20:42:58 01-26-2006 20:42:58 The planet is presumably a sphere, so to the extent that this is so the volume of this planet is V = 4/3 pi r^3, where r is the radius of the planet. The diameter of the planet is 14,000 km so the radius is half this, or 7,000 km. It follows that the volume of the planet is V = 4/3 pi r^3 = 4/3 pi * (7,000 km)^3 = 4/3 pi * 343,000,000,000 km^3 = 1,372,000,000,000 / 3 * pi km^3. This result can be approximated to an appropriate number of significant figures.
......!!!!!!!!...................................
NOTES -------> I put the answer in significant digits
.......................................................!!!!!!!!...................................
20:44:41 `q010. Summary Question 1: What basic principle do we apply to find the volume of a uniform cylinder of known dimensions?
......!!!!!!!!...................................
RESPONSE --> We apply the basic principle of area of the base, pi*r^2. then multiply by the height.
.................................................
......!!!!!!!!...................................
20:44:59 01-26-2006 20:44:59 The principle is that when the cross-section of an object is constant, its volume is V = A * h, where A is the cross-sectional area and h the altitude. Altitude is measure perpendicular to the cross-section.
......!!!!!!!!...................................
NOTES -------> The cross section of the object is constant.
.......................................................!!!!!!!!...................................
20:46:38 `q011. Summary Question 2: What basic principle do we apply to find the volume of a pyramid or a cone?
......!!!!!!!!...................................
RESPONSE --> The cross-section is constant therefore just take the area of the base and multiply it by the height and then multiply again by 1/3.
.................................................
......!!!!!!!!...................................
20:46:51 The volumes of these solids are each 1/3 the volume of the enclosing figure. Each volume can be expressed as V = 1/3 A * h, where A is the area of the base and h the altitude as measured perpendicular to the base.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
20:47:56 `q012. Summary Question 3: What is the formula for the volume of a sphere?
......!!!!!!!!...................................
RESPONSE --> Volume of a sphere equals 4/3 * pi * radius raised to the third power.
.................................................
......!!!!!!!!...................................
20:48:16 The volume of a sphere is V = 4/3 pi r^3, where r is the radius of the sphere.
......!!!!!!!!...................................
RESPONSE --> Forgot to mention that r is always the radius.
.................................................
......!!!!!!!!...................................
20:50:07 `q013. Explain how you have organized your knowledge of the principles illustrated by the exercises in this assignment.
......!!!!!!!!...................................
RESPONSE --> The area of the base is the same as pi*r^2. The volume of an object always involves a base and an altitude. Spheres and cones and pyramids use r^3.
.................................................
......!!!!!!!!...................................
20:50:16 This ends the second assignment.
......!!!!!!!!...................................
RESPONSE --> yyyyyyeeeeeessssss!!!!!!!
.................................................
assignment #002 [뺗܃ܝ Physics I 01-26-2006
......!!!!!!!!...................................
22:03:37 ** Questions about velocity, average velocity, acceleration, etc. are very confusing because so many of the concepts have similar definitions. People have trouble distinguishing things like average velocity, which for uniform acceleration can be obtained in a process that adds two velocities, from average acceleration, which involves subtracting two velocities; one of these processes involves dividing by 2 and the other dividing by the time interval `dt.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
22:03:40 It is essential to keep the definitions and the meanings of the terms very clear and to work everything from definitions. It is equally important to have a good common-sense understanding of every definition so you can develop the intuition to make sense of everything you do.
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
22:03:51 That inevitably takes people a little time. But in the process you develop the habits you will need to succeed in the course. **
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
22:04:11 How is acceleration an example of a rate of change?
......!!!!!!!!...................................
RESPONSE --> acceleration measures change in distance over time.
.................................................
......!!!!!!!!...................................
22:04:32 01-26-2006 22:04:32 ** Velocity is the rate of change of position. Acceleration is rate of change of velocity--change in velocity divided by the time period. To find the acceleration from a v vs. t graph you take the rise, which represents the change in the average velocity, and divide by the run, which represents the change in time. The average rate of change of velocity with respect to clock time is the same as the acceleration **
......!!!!!!!!...................................
NOTES -------> rate of change of postition
.......................................................!!!!!!!!...................................
22:05:58 If you know average acceleration and time interval what can you find?
......!!!!!!!!...................................
RESPONSE --> you can find change in velocity
.................................................
......!!!!!!!!...................................
22:06:02 ** Accel = change in vel / change in clock time, so if you know accel and time interval (i.e., change in clock time) you can find change in vel = accel * change in clock time. In this case you don't know anything about how fast the object is traveling. You can only find the change in its velocity. COMMON ERROR (and response): Average acceleration is the average velocity divided by the time (for the change in the average velocity)so you would be able to find the average velocity by multiplying the average acceleration by the change in time. INSTRUCTOR RESPONSE: Acceleration is rate of change of velocity--change in velocity divided by the change in clock time. It is not average velocity / change in clock time. COUNTEREXAMPLE TO COMMON ERROR: Moving at a constant 60 mph for 3 hours, there is no change in velocity so acceleration = rate of change of velocity is zero. However average velocity / change in clock time = 60 mph / (3 hr) = 20 mile / hr^2, which is not zero. This shows that acceleration is not ave vel / change in clock time. COMMON ERROR and response: You can find displacement INSTRUCTOR RESPONSE: From average velocity and time interval you can find displacement. However from average acceleration and time interval you can find only change in velocity. Acceleration is the rate at which velocity changes so average acceleration is change in velocity/change in clock time. From this it follows that change in velocity = acceleration*change in clock time. **
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
22:08:39 Can you find velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> yes, avg. acceleration is the same as acceleration so you can use the formula in the previous question. accel*change in clock time=velocity
.................................................
......!!!!!!!!...................................
22:09:27 ** Ave accel = change in vel / change in clock time. If acceleration is constant, then this relationship becomes acceleration = change in velocity/change in clock time. Change in clock time is the time interval, so if we know time interval and acceleration we can find change in velocity = acceleration * change in clock time = acceleration * change in clock time. We cannot find velocity, only change in velocity. We would need additional information (e.g., initial velocity, average velocity or final velocity) to find an actual velocity. For example if we know that the velocity of a car is changing at 2 (mi/hr) / sec then we know that in 5 seconds the speed will change by 2 (mi/hr)/s * 5 s = 10 mi/hr. But we don't know how fast the car is going in the first place, so we have no information about its actual velocity. If this car had originally been going 20 mi/hr, it would have ended up at 30 miles/hr. If it had originally been going 70 mi/hr, it would have ended up at 80 miles/hr. Similarly if an object is accelerating at 30 m/s^2 (i.e., 30 (m/s) / s) for eight seconds, its velocity will change by 30 meters/second^2 * 8 seconds = 240 m/s. Again we don't know what the actual velocity will be because we don't know what velocity the object was originally moving. ANOTHER SOLUTION: The answer is 'No'. You can divide `ds (change in position) by `dt (change in clock time) to get vAve = `ds / `dt. Or you can divide `dv (change in vel) by `dt to get aAve. So from aAve and `dt you can get `dv, the change in v. But you can't get v itself. EXAMPLE: You can find the change in a quantity from a rate and a time interval, but you can't find the actual value of the quantity. For example, accelerating for 2 sec at 3 mph / sec, your velocity changes by 6 mph, but that's all you know. You don't know how fast you were going in the first place. Could be from 5 mph to 12 mph, or 200 mph to 206 mph (hopefully not down the Interstate). COMMON ERROR: Yes. Final velocity is average velocity multiplied by 2. INSTRUCTOR RESPONSE: We aren't given ave velocity and time interval, we're give ave accel and time interval, so this answer is not valid. Note also that final velocity is average velocity multiplied by 2 ONLY when init vel is zero. Be sure you always state it this way. ANOTHER EXAMPLE: You can't find velocity from ave accel and time interval--you can only find change in velocity from this information. For example a velocity change of 10 mph would result from ave accel 2 m/s^2 for 2 seconds; this change could be between 10 and 20 mph or between 180 and 190 mph, and if all we know is ave accel and time interval we couldn't tell the difference. ONE MORE RESPONSE: You can find the change in velocity. The actual velocity cannot be found from ave accel and time interval. For example you would get the same result for acceleration if a car went from 10 mph to 20 mph in 5 sec as you would if it went from 200 mph to 220 mph in 10 sec. **
......!!!!!!!!...................................
RESPONSE --> you cannot find velocity only change in velocity. You need initial and final velocity to find actual velocity.
.................................................
......!!!!!!!!...................................
22:12:12 Can you find change in velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> Yes, if we know time interval and acceleration we can find change in velocity. acceleration * change in clock time = change in velocity
.................................................
......!!!!!!!!...................................
22:12:31 **Good student response: Yes, the answer that I provided previously is wrong, I didn't consider the 'change in velocity' I only considered the velocity as being the same as the change in velocity and that was not correct. Change in velocity is average accel * `dt. CALCULUS-RELATED ANSWER WITH INSTRUCTOR NOTE(relevant mostly to University Physics students) Yes, you take the integral with respect to time INSTRUCTOR NOTE: That's essentially what you're doing if you multiply average acceleration by time interval. In calculus terms the reason you can't get actual velocity from acceleration information alone is that when you integrate acceleration you get an arbitrary integration constant. You don't have any information in those questions to evaluate c. **
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
22:18:52 Can you find average velocity from average acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> Yes you can find average velocity from average acceleration and time interval.
.................................................
......!!!!!!!!...................................
22:20:21 01-26-2006 22:20:21 ** CORRECT STATEMENT BUT NOT AN ANSWER TO THIS QUESTION: The average acceleration would be multiplied by the time interval to find the change in the velocity INSTRUCTOR RESPONSE: Your statement is correct, but as you say you can find change in vel, which is not the same thing as ave vel. You cannot find ave vel. from just accel and time interval. There is for example nothing in accel and time interval that tells you how fast the object was going initially. The same acceleration and time interval could apply as well to an object starting from rest as to an object starting at 100 m/s; the average velocity would not be the same in both cases. So accel and time interval cannot determine average velocity. CALCULUS-RELATED ERRONEOUS ANSWER AND INSTRUCTOR CLAIRIFICATION(relevant mostly to University Physics students: Yes, you take the integral and the limits of integration at the time intervals CLARIFICATION BY INSTRUCTOR: A definite integral of acceleration with respect to t gives you only the change in v, not v itself. You need an initial condition to evaluate the integration constant in the indefinite integral. To find the average velocity you would have to integrate velocity (definite integral over the time interval) and divide by the time interval. **
......!!!!!!!!...................................
NOTES -------> You must know how fast the object was going initially.
.......................................................!!!!!!!!...................................
22:21:22 You can find only change in velocity from average acceleration and time interval. To find actual velocity you have to know at what velocity you started. Why can't you find average velocity from acceleration and time interval?
......!!!!!!!!...................................
RESPONSE --> acceleration and time interval tell nothing about how fast the object was going initially
.................................................
......!!!!!!!!...................................
22:21:28 ** Average velocity is change in position/change in clock time. Average velocity has no direct relationship with acceleration. CALCULUS-RELATED ANSWER you dont know the inital velocity or the final velocity INSTRUCTOR COMMENT: . . . i.e., you can't evaluate the integration constant. **
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
22:22:00 General College Physics only: Problem #10 Summarize your solution Problem 1.10 (approx. uncertainty in area of circle given radius 2.8 * 10^4 cm).
......!!!!!!!!...................................
RESPONSE --> I principles
.................................................
......!!!!!!!!...................................
22:22:05 ** Radius 2.8 * 10^4 cm means that the radius is between 2.75 * 10^4 cm and 2.85 * 10^4 cm. This means that the area is between pi * (2.75 * 10^4 cm)^2 = 2.376 * 10^9 cm^2 and pi * (2.85 * 10^4 cm)^2 = 2.552 * 10^9 cm^2. The difference is .176 * 10^9 cm^2 = 1.76 * 10^8 cm^2, which is the uncertainty in the area. Note that the .1 * 10^4 cm uncertainty in radius is about 4% of the radius, which the .176 * 10^9 cm uncertainty in area is about 8% of the area. This is because the area is proportional to the squared radius. A small percent uncertainty in the radius gives very nearly double the percent uncertainty in the squared radius. **
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
22:23:40 Query Add comments on any surprises or insights you experienced as a result of this assignment.
......!!!!!!!!...................................
RESPONSE --> I don't have any comments.
.................................................
......!!!!!!!!...................................
22:23:45 ** COMMON STUDENT COMMENT AND INSTRUCTOR RESPONSE: I am really confused about velocity, acceleration changes in velocity and acceleration, etc. I guess I am the type that works with a formula and plugs in a number. I have went back to the class notes and the problem sets to summarize formulas. Any suggestions? RESPONSE: I note that you are expressing most of your answers in the form of formulas. Ability to use formulas and plug in numbers is useful, but it doesn't involve understanding the concepts, and without an understanding of the concepts we tend to plug our numbers into equations that don't apply. So we deal first with concepts. However formulas do come along fairly soon. The concepts of velocity, acceleration, etc. are very fundamental, but they are tricky and they take awhile to master. You are doing OK at this point. You'll see plenty more over the next few assignments. If you look at the Linked Outline (on the main Physics 1 page--the one where you click on the Assts button--click on the Overviews button, then on the Linked Outline. You will see a table with a bunch of formulas and links to explanations. You might find this page very useful. Also the Introductory Problem Sets give you formulas in the Generalized Solutions. **
......!!!!!!!!...................................
RESPONSE --> ok
.................................................
......!!!!!!!!...................................
22:26:20 Principles of Physics Students and General College Physics Students: Problem 14. What is your own height in meters and what is your own mass in kg, and how did you determine these?
......!!!!!!!!...................................
RESPONSE --> My height: 1.73 meters. Determined by converting feet to inches and inches to meters. 1in=.0254 My mass: 59.1 kilograms. Determined by by converting pounds to kilograms. 1 lbs=2.2 kg
.................................................
......!!!!!!!!...................................
22:26:43 01-26-2006 22:26:43 Presumably you know your height in feet and inches, and your weight in pounds. Presumably also, you can convert your height in feet and inches to inches. To get your height in meters, you would first convert your height in inches to cm, using the fact that 1 inch = 2.54 cm. Dividing both sides of 1 in = 2.54 cm by either 1 in or 2.54 cm tells us that 1 = 1 in / 2.54 cm or that 1 = 2.54 cm / 1 in, so any quantity can be multiplied by 1 in / (2.54 cm) or by 2.54 cm / (1 in) without changing its value. Thus if you multiply your height in inches by 2.54 cm / (1 in), you will get your height in cm. For example if your height is 69 in, your height in cm will be 69 in * 2.54 cm / (1 in) = 175 in * cm / in. in * cm / in = (in / in) * cm = 1 * cm = cm, so our calculation comes out 175 cm.
......!!!!!!!!...................................
NOTES -------> ok didn't do it exactly like this but it is still correct
................................................."