course Mth 163 Can you please send me an email and tell me if I am doing everything right or not. I am a little unsure. And could you also tell me if this is all for assignment 0. TXܟyOщ䆯ψassignment #002
......!!!!!!!!...................................
14:37:54 `questionNumber 20000 `q001. You will frequently need to describe the graphs you have constructed in this course. This exercise is designed to get you used to some of the terminology we use to describe graphs. Please complete this exercise and email your work to the instructor. Note that you should do these graphs on paper without using a calculator. None of the arithmetic involved here should require a calculator, and you should not require the graphing capabilities of your calculator to answer these questions. Problem 1. We make a table for y = 2x + 7 as follows: We construct two columns, and label the first column 'x' and the second 'y'. Put the numbers -3, -2, -1, -, 1, 2, 3 in the 'x' column. We substitute -3 into the expression and get y = 2(-3) + 7 = 1. We substitute -2 and get y = 2(-2) + 7 = 3. Substituting the remaining numbers we get y values 5, 7, 9, 11 and 13. These numbers go into the second column, each next to the x value from which it was obtained. We then graph these points on a set of x-y coordinate axes. Noting that these points lie on a straight line, we then construct the line through the points. Now make a table for and graph the function y = 3x - 4. Identify the intercepts of the graph, i.e., the points where the graph goes through the x and the y axes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment: 0
.................................................
......!!!!!!!!...................................
14:38:10 `questionNumber 20000 `q002. Does the steepness of the graph in the preceding exercise (of the function y = 3x - 4) change? If so describe how it changes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment: 0
.................................................
......!!!!!!!!...................................
14:41:09 `questionNumber 20000 `q003. What is the slope of the graph of the preceding two exercises (the function ia y = 3x - 4;slope is rise / run between two points of the graph)?
......!!!!!!!!...................................
RESPONSE --> 3 is the slope confidence assessment: 2
.................................................
......!!!!!!!!...................................
14:41:35 `questionNumber 20000 Between any two points of the graph rise / run = 3. For example, when x = 2 we have y = 3 * 2 - 4 = 2 and when x = 8 we have y = 3 * 8 - 4 = 20. Between these points the rise is 20 - 2 = 18 and the run is 8 - 2 = 6 so the slope is rise / run = 18 / 6 = 3. Note that 3 is the coefficient of x in y = 3x - 4. Note the following for reference in subsequent problems: The graph of this function is a straight line. The graph increases as we move from left to right. We therefore say that the graph is increasing, and that it is increasing at constant rate because the steepness of a straight line doesn't change.
......!!!!!!!!...................................
RESPONSE --> ok self critique assessment: 0
.................................................
......!!!!!!!!...................................
14:45:15 `questionNumber 20000 `q004. Make a table of y vs. x for y = x^2. Graph y = x^2 between x = 0 and x = 3. Would you say that the graph is increasing or decreasing? Does the steepness of the graph change and if so, how? Would you say that the graph is increasing at an increasing rate, increasing at a constant rate, increasing at a decreasing rate, decreasing at an decreasing rate, decreasing at a constant rate, or decreasing at a decreasing rate?
......!!!!!!!!...................................
RESPONSE --> It is a parabola and it is increasing. The steepness decreases because the parabola gets wider. It is increasing at a constant rate confidence assessment: 1
.................................................
......!!!!!!!!...................................
14:45:58 `questionNumber 20000 Graph points include (0,0), (1,1), (2,4) and (3,9). The y values are 0, 1, 4 and 9, which increase as we move from left to right. The increases between these points are 1, 3 and 5, so the graph not only increases, it increases at an increasing rate STUDENT QUESTION: I understand increasing...im just not sure at what rate...how do you determine increasing at an increasing rate or a constant rate? INSTRUCTOR RESPONSE: Does the y value increase by the same amount, by a greater amount or by a lesser amount every time x increases by 1? In this case the increases get greater and greater. So the graph increases, and at an increasing rate. *&*&.
......!!!!!!!!...................................
RESPONSE --> I think I understand about the increasing rates self critique assessment: 2
.................................................
......!!!!!!!!...................................
14:47:30 `questionNumber 20000 `q005. Make a table of y vs. x for y = x^2. Graph y = x^2 between x = -3 and x = 0. Would you say that the graph is increasing or decreasing? Does the steepness of the graph change and if so, how? Would you say that the graph is increasing at an increasing rate, increasing at a constant rate, increasing at a decreasing rate, decreasing at an decreasing rate, decreasing at a constant rate, or decreasing at a decreasing rate?
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
14:48:14 `questionNumber 20000 ** The speed of the car increases so it goes further each second. On a graph of distance vs. clock time there would be a greater change in distance with each second, which would cause a greater slope with each subsequent second. The graph would therefore be increasing at an increasing rate. **
......!!!!!!!!...................................
RESPONSE --> self critique assessment:
.................................................
Ϊ̡ܰі assignment #001 001. Rates qa rates 01-20-2009
......!!!!!!!!...................................
15:27:54 `questionNumber 10000 `q001. You should copy and paste these instructions to a word processor for reference. However you can always view them, as well as everything else that has appeared in this box, by clicking the 'Display Everything' button. 1. For the next question or answer, you click on 'Next Question / Answer' button above the box at top left until a question has been posed. Once a question has been posed you are to answer before you click again on this button. 2. Before clicking for an answer, type your best answer to the current question into the box to the right, then clip on the 'Enter Answer' button. 3. After entering your answer you will click on 'Next Question / Answer' to view the answer to the question. Do not tamper with the information displayed in the left-hand box. 4. If your answer was incorrect, incomplete or would otherwise require revision, you will enter a self-critique. If you learned something from the answer, you need to restate it in your own words in order to reinforce your learning. If there is something you feel you should note for future reference, you should make a note in your own words. Go to the response box (the right-hand box) and type in a self-critique and/or notes, as appropriate. Do not copy and paste anything from the left-hand box, since that information will be saved in any case. 5. If you wish to save your response to your Notes file you may choose to click on the 'Save As Notes' button rather than the 'Enter Answer' button. Doing so will save your work for your future reference. Your work will be saved in a Notes file in the c:\vhmthphy folder. The title of the Notes file will also include the name you gave when you started the program. 6. After clicking either the 'Enter Response' or the 'Save as Notes' button, click on 'Next Question / Answer' and proceed in a similar manner. In the right-hand box briefly describe your understanding of these instructions, then click 'Enter Answer'.
......!!!!!!!!...................................
RESPONSE --> For the question click the next question/answer button then type your answer and hit enter response button. If your answer is incorrect state in your own words what you learned from it confidence assessment: 3
.................................................
......!!!!!!!!...................................
15:28:44 `questionNumber 10000 Your answer has been noted. Enter 'ok' in the Response Box and click on Enter Response, then click on Next Question/Answer for the first real question.
......!!!!!!!!...................................
RESPONSE --> ok confidence assessment:
.................................................
......!!!!!!!!...................................
15:29:53 `questionNumber 10000 `q002. Note that there are 10 questions in this assignment. The questions are of increasing difficulty--the first questions are fairly easy but later questions are very tricky. The main purposes of these exercises are to refine your thinking about rates, and to see how you process challenging information. Continue as far as you can until you are completely lost. Students who are prepared for the highest-level math courses might not ever get lost. If you make $50 in 5 hr, then at what rate are you earning money?
......!!!!!!!!...................................
RESPONSE --> ten dollars an hour confidence assessment:
.................................................
......!!!!!!!!...................................
15:30:21 `questionNumber 10000 The rate at which you are earning money is the number of dollars per hour you are earning. You are earning money at the rate of 50 dollars / (5 hours) = 10 dollars / hour. It is very likely that you immediately came up with the $10 / hour because almosteveryone is familiar with the concept of the pay rate, the number of dollars per hour. Note carefully that the pay rate is found by dividing the quantity earned by the time required to earn it. Time rates in general are found by dividing an accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
15:30:55 `questionNumber 10000 `q003.If you make $60,000 per year then how much do you make per month?
......!!!!!!!!...................................
RESPONSE --> 5000 a month confidence assessment: 3
.................................................
......!!!!!!!!...................................
15:31:09 `questionNumber 10000 Most people will very quickly see that we need to divide $60,000 by 12 months, giving us 60,000 dollars / (12 months) = 5000 dollars / month. Note that again we have found a time rate, dividing the accumulated quantity by the time required to accumulate it. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
15:32:25 `questionNumber 10000 `q004. Suppose that the $60,000 is made in a year by a small business. Would be more appropriate to say that the business makes $5000 per month, or that the business makes an average of $5000 per month?
......!!!!!!!!...................................
RESPONSE --> an average of 5000 per month because businesses don't have set salaries it depends on what they do and how well they do confidence assessment: 3
.................................................
......!!!!!!!!...................................
15:32:58 `questionNumber 10000 Small businesses do not usually make the same amount of money every month. The amount made depends on the demand for the services or commodities provided by the business, and there are often seasonal fluctuations in addition to other market fluctuations. It is almost certain that a small business making $60,000 per year will make more than $5000 in some months and less than $5000 in others. Therefore it is much more appropriate to say that the business makes and average of $5000 per month. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
15:34:32 `questionNumber 10000 `q005. If you travel 300 miles in 6 hours, at what average rate are you covering distance, and why do we say average rate instead of just plain rate?
......!!!!!!!!...................................
RESPONSE --> 50 miles per hour average, we say average because it is possible that what you are traveling in might slow down or speed up confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:34:57 `questionNumber 10000 The average rate is 50 miles per hour, or 50 miles / hour. This is obtained by dividing the accumulated quantity, the 300 miles, by the time required to accumulate it, obtaining ave rate = 300 miles / ( 6 hours) = 50 miles / hour. Note that the rate at which distance is covered is called speed. The car has an average speed of 50 miles/hour. We say 'average rate' in this case because it is almost certain that slight changes in pressure on the accelerator, traffic conditions and other factors ensure that the speed will sometimes be greater than 50 miles/hour and sometimes less than 50 miles/hour; the 50 miles/hour we obtain from the given information is clearly and overall average of the velocities. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
15:36:37 `questionNumber 10000 `q006. If you use 60 gallons of gasoline on a 1200 mile trip, then at what average rate are you using gasoline, with respect to miles traveled?
......!!!!!!!!...................................
RESPONSE --> an average of twenty miles per gallon, but due to weather changes, wind, and speed there is probably a slight change in miles per gallon confidence assessment: 3
.................................................
......!!!!!!!!...................................
15:38:12 01-20-2009 15:38:12 The rate of change of one quantity with respect to another is the change in the first quantity, divided by the change in the second. As in previous examples, we found the rate at which money was made with respect to time by dividing the amount of money made by the time required to make it. By analogy, the rate at which we use fuel with respect to miles traveled is the change in the amount of fuel divided by the number of miles traveled. In this case we use 60 gallons of fuel in 1200 miles, so the average rate it 60 gal / (1200 miles) = .05 gallons / mile. Note that this question didn't ask for miles per gallon. Miles per gallon is an appropriate and common calculation, but it measures the rate at which miles are covered with respect to the amount of fuel used. Be sure you see the difference. Note that in this problem we again have here an example of a rate, but unlike previous instances this rate is not calculated with respect to time. This rate is calculated with respect to the amount of fuel used. We divide the accumulated quantity, in this case miles, by the amount of fuel required to cover those miles. Note that again we call the result of this problem an average rate because there are always at least subtle differences in driving conditions that require the use of more fuel on some miles than on others. It's very important to understand the phrase 'with respect to'. Whether the calculation makes sense or not, it is defined by the order of the terms. In this case gallons / mile tells you how many gallons you are burning, on the average, per mile. This concept is not as familiar as miles / gallon, but except for familiarity it's technically no more difficult. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
NOTES -------> I did it wrong because I did miles per gallon. The correct answer is .05 gallons per mile
.................................................
......!!!!!!!!...................................
15:38:43 `questionNumber 10000 `q007. The word 'average' generally connotes something like adding two quantities and dividing by 2, or adding several quantities and dividing by the number of quantities we added. Why is it that we are calculating average rates but we aren't adding anything?
......!!!!!!!!...................................
RESPONSE --> because there is nothing to add it is already together confidence assessment: 1
.................................................
......!!!!!!!!...................................
15:38:58 `questionNumber 10000 The word 'average' in the context of the dollars / month, miles / gallon types of questions we have been answering was used because we expect that in different months different amounts were earned, or that over different parts of the trip the gas mileage might have varied, but that if we knew all the individual quantities (e.g., the dollars earned each month, the number of gallons used with each mile) and averaged them in the usual manner, we would get the .05 gallons / mile, or the $5000 / month. In a sense we have already added up all the dollars earned in each month, or the miles traveled on each gallon, and we have obtained the total $60,000 or 1200 miles. Thus when we divide by the number of months or the number of gallons, we are in fact calculating an average rate. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
15:42:46 `questionNumber 10000 `q008. In a study of how lifting strength is influenced by various ways of training, a study group was divided into 2 subgroups of equally matched individuals. The first group did 10 pushups per day for a year and the second group did 50 pushups per day for year. At the end of the year to lifting strength of the first group averaged 147 pounds, while that of the second group averaged 162 pounds. At what average rate did lifting strength increase per daily pushup?
......!!!!!!!!...................................
RESPONSE --> 2.6 confidence assessment: 0
.................................................
......!!!!!!!!...................................
15:43:35 01-20-2009 15:43:35 The second group had 15 pounds more lifting strength as a result of doing 40 more daily pushups than the first. The desired rate is therefore 15 pounds / 40 pushups = .375 pounds / pushup. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
NOTES -------> 15/40 not 40/15 so the answer is .375
.................................................
......!!!!!!!!...................................
15:45:00 `questionNumber 10000 `q009. In another part of the study, participants all did 30 pushups per day, but one group did pushups with a 10-pound weight on their shoulders while the other used a 30-pound weight. At the end of the study, the first group had an average lifting strength of 171 pounds, while the second had an average lifting strength of 188 pounds. At what average rate did lifting strength increase with respect to the added shoulder weight?
......!!!!!!!!...................................
RESPONSE --> .85 confidence assessment: 2
.................................................
......!!!!!!!!...................................
15:45:52 01-20-2009 15:45:52 The difference in lifting strength was 17 pounds, as a result of a 20 pound difference in added weight. The average rate at which strength increases with respect added weight would therefore be 17 lifting pounds / (20 added pounds) = .85 lifting pounds / added pound. The strength advantage was .85 lifting pounds per pound of added weight, on the average. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
NOTES -------> .85 lifting pounds/ added pounds per pound of added weight, on the average
.................................................
......!!!!!!!!...................................
18:01:33 `questionNumber 10000 `q010. During a race, a runner passes the 100-meter mark 12 seconds after the start and the 200-meter mark 22 seconds after the start. At what average rate was the runner covering distance between those two positions?
......!!!!!!!!...................................
RESPONSE --> an average of 9.1 meters per second confidence assessment: 2
.................................................
......!!!!!!!!...................................
18:03:11 `questionNumber 10000 The runner traveled 100 meters between the two positions, and required 10 seconds to do so. The average rate at which the runner was covering distance was therefore 100 meters / (10 seconds) = 10 meters / second. Again this is an average rate; at different positions in his stride the runner would clearly be traveling at slightly different speeds. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> I didn't realize what we supposed to do in the problem but now I understand confidence assessment: 2
.................................................
......!!!!!!!!...................................
18:04:16 `questionNumber 10000 `q011. During a race, a runner passes the 100-meter mark moving at 10 meters / second, and the 200-meter mark moving at 9 meters / second. What is your best estimate of how long it takes the runner to cover the 100 meter distance?
......!!!!!!!!...................................
RESPONSE --> about 10 seconds confidence assessment: 1
.................................................
......!!!!!!!!...................................
18:04:43 `questionNumber 10000 At 10 meters/sec, the runner would require 10 seconds to travel 100 meters. However the runner seems to be slowing, and will therefore require more than 10 seconds to travel the 100 meters. We don't know what the runner's average speed is, we only know that it goes from 10 m/s to 9 m/s. The simplest estimate we could make would be that the average speed is the average of 10 m/s and 9 m/s, or (10 m/s + 9 m/s ) / 2 = 9.5 m/s. Taking this approximation as the average rate, the time required to travel 100 meters will be (100 meters) / (9.5 m/s) = 10.5 sec, approx.. Note that simply averaging the 10 m/s and the 9 m/s might not be the best way to approximate the average rate--for example we if we knew enough about the situation we might expect that this runner would maintain the 10 m/s for most of the remaining 100 meters, and simply tire during the last few seconds. However we were not given this information, and we don't add extraneous assumptions without good cause. So the approximation we used here is pretty close to the best we can do with the given information. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
18:05:26 `questionNumber 10000 `q012. We just averaged two quantities, adding them in dividing by 2, to find an average rate. We didn't do that before. Why we do it now?
......!!!!!!!!...................................
RESPONSE --> because before there was nothing to average before it was already averaged confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:05:54 `questionNumber 10000 In previous examples the quantities weren't rates. We were given the amount of change of some accumulating quantity, and the change in time or in some other quantity on which the first was dependent (e.g., dollars and months, miles and gallons). Here we are given 2 rates, 10 m/s and 9 m/s, in a situation where we need an average rate in order to answer a question. Within this context, averaging the 2 rates was an appropriate tactic. You need to make note of anything in the given solution that you didn't understand when you solved the problem. If new ideas have been introduced in the solution, you need to note them. If you notice an error in your own thinking then you need to note that. In your own words, explain anything you didn't already understand and save your response as Notes.
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
wȩͦTz assignment #001 001. Areas qa areas volumes misc 01-20-2009
......!!!!!!!!...................................
18:08:01 `questionNumber 10000 `q001. There are 11 questions and 7 summary questions in this assignment. What is the area of a rectangle whose dimensions are 4 m by 3 meters.
......!!!!!!!!...................................
RESPONSE --> 14 confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:09:28 `questionNumber 10000 A 4 m by 3 m rectangle can be divided into 3 rows of 4 squares, each 1 meter on a side. This makes 3 * 4 = 12 such squares. Each 1 meter square has an area of 1 square meter, or 1 m^2. The total area of the rectangle is therefore 12 square meters, or 12 m^2. The formula for the area of a rectangle is A = L * W, where L is the length and W the width of the rectangle. Applying this formula to the present problem we obtain area A = L * W = 4 m * 3 m = (4 * 3) ( m * m ) = 12 m^2. Note the use of the unit m, standing for meters, in the entire calculation. Note that m * m = m^2.
......!!!!!!!!...................................
RESPONSE --> I see what I did wrong instead of L x W I did L+L+W+W self critique assessment: 2
.................................................
......!!!!!!!!...................................
18:12:03 `questionNumber 10000 `q002. What is the area of a right triangle whose legs are 4.0 meters and 3.0 meters?
......!!!!!!!!...................................
RESPONSE --> 6 (1/2) x 4x3 confidence assessment: 1
.................................................
......!!!!!!!!...................................
18:12:17 `questionNumber 10000 A right triangle can be joined along its hypotenuse with another identical right triangle to form a rectangle. In this case the rectangle would have dimensions 4.0 meters by 3.0 meters, and would be divided by any diagonal into two identical right triangles with legs of 4.0 meters and 3.0 meters. The rectangle will have area A = L * W = 4.0 m * 3.0 m = 12 m^2, as explained in the preceding problem. Each of the two right triangles, since they are identical, will therefore have half this area, or 1/2 * 12 m^2 = 6.0 m^2. The formula for the area of a right triangle with base b and altitude h is A = 1/2 * b * h.
......!!!!!!!!...................................
RESPONSE --> self critique assessment:
.................................................
......!!!!!!!!...................................
18:13:17 `questionNumber 10000 `q003. What is the area of a parallelogram whose base is 5.0 meters and whose altitude is 2.0 meters?
......!!!!!!!!...................................
RESPONSE --> 10 confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:13:26 `questionNumber 10000 A parallelogram is easily rearranged into a rectangle by 'cutting off' the protruding end, turning that portion upside down and joining it to the other end. Hopefully you are familiar with this construction. In any case the resulting rectangle has sides equal to the base and the altitude so its area is A = b * h. The present rectangle has area A = 5.0 m * 2.0 m = 10 m^2.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
18:14:54 `questionNumber 10000 `q004. What is the area of a triangle whose base is 5.0 cm and whose altitude is 2.0 cm?
......!!!!!!!!...................................
RESPONSE --> 5 because (1/2) 5*2 confidence assessment: 2
.................................................
......!!!!!!!!...................................
18:15:05 `questionNumber 10000 It is possible to join any triangle with an identical copy of itself to construct a parallelogram whose base and altitude are equal to the base and altitude of the triangle. The area of the parallelogram is A = b * h, so the area of each of the two identical triangles formed by 'cutting' the parallelogram about the approriate diagonal is A = 1/2 * b * h. The area of the present triangle is therefore A = 1/2 * 5.0 cm * 2.0 cm = 1/2 * 10 cm^2 = 5.0 cm^2.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
18:16:07 `questionNumber 10000 `q005. What is the area of a trapezoid with a width of 4.0 km and average altitude of 5.0 km?
......!!!!!!!!...................................
RESPONSE --> 20.0 km confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:16:25 `questionNumber 10000 `q006. What is the area of a trapezoid whose width is 4 cm in whose altitudes are 3.0 cm and 8.0 cm?
......!!!!!!!!...................................
RESPONSE --> confidence assessment:
.................................................
......!!!!!!!!...................................
18:17:05 `questionNumber 10000 The area is equal to the product of the width and the average altitude. Average altitude is (3 cm + 8 cm) / 2 = 5.5 cm so the area of the trapezoid is A = 4 cm * 5.5 cm = 22 cm^2.
......!!!!!!!!...................................
RESPONSE --> self critique assessment:
.................................................
......!!!!!!!!...................................
18:18:34 `questionNumber 10000 `q007. What is the area of a circle whose radius is 3.00 cm?
......!!!!!!!!...................................
RESPONSE --> 28.3 because pie times radius squared confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:18:51 `questionNumber 10000 The area of a circle is A = pi * r^2, where r is the radius. Thus A = pi * (3 cm)^2 = 9 pi cm^2. Note that the units are cm^2, since the cm unit is part r, which is squared. The expression 9 pi cm^2 is exact. Any decimal equivalent is an approximation. Using the 3-significant-figure approximation pi = 3.14 we find that the approximate area is A = 9 pi cm^2 = 9 * 3.14 cm^2 = 28.26 cm^2, which we round to 28.3 cm^2 to match the number of significant figures in the given radius. Be careful not to confuse the formula A = pi r^2, which gives area in square units, with the formula C = 2 pi r for the circumference. The latter gives a result which is in units of radius, rather than square units. Area is measured in square units; if you get an answer which is not in square units this tips you off to the fact that you've made an error somewhere.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
18:20:57 `questionNumber 10000 `q008. What is the circumference of a circle whose radius is exactly 3 cm?
......!!!!!!!!...................................
RESPONSE --> 18.8 radius+radius x pie confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:21:25 `questionNumber 10000 The circumference of this circle is C = 2 pi r = 2 pi * 3 cm = 6 pi cm. This is the exact area. An approximation to 3 significant figures is 6 * 3.14 cm = 18.84 cm. Note that circumference is measured in the same units as radius, in this case cm, and not in cm^2. If your calculation gives you cm^2 then you know you've done something wrong.
......!!!!!!!!...................................
RESPONSE --> left of the 4 out of 18.84 self critique assessment: 1
.................................................
......!!!!!!!!...................................
18:23:16 `questionNumber 10000 `q009. What is the area of a circle whose diameter is exactly 12 meters?
......!!!!!!!!...................................
RESPONSE --> 113.1 confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:23:23 `questionNumber 10000 The area of a circle is A = pi r^2, where r is the radius. The radius of this circle is half the 12 m diameter, or 6 m. So the area is A = pi ( 6 m )^2 = 36 pi m^2. This result can be approximated to any desired accuracy by using a sufficient number of significant figures in our approximation of pi. For example using the 5-significant-figure approximation pi = 3.1416 we obtain A = 36 m^2 * 3.1416 = 113.09 m^2.
......!!!!!!!!...................................
RESPONSE --> self critique assessment:
.................................................
......!!!!!!!!...................................
18:23:46 `questionNumber 10000 `q010. What is the area of a circle whose circumference is 14 `pi meters?
......!!!!!!!!...................................
RESPONSE --> have no idea confidence assessment: 0
.................................................
......!!!!!!!!...................................
18:24:05 01-20-2009 18:24:05 We know that A = pi r^2. We can find the area if we know the radius r. We therefore attempt to use the given information to find r. We know that circumference and radius are related by C = 2 pi r. Solving for r we obtain r = C / (2 pi). In this case we find that r = 14 pi m / (2 pi) = (14/2) * (pi/pi) m = 7 * 1 m = 7 m. We use this to find the area A = pi * (7 m)^2 = 49 pi m^2.
......!!!!!!!!...................................
NOTES -------> We know that A = pi r^2. We can find the area if we know the radius r. We therefore attempt to use the given information to find r. We know that circumference and radius are related by C = 2 pi r. Solving for r we obtain r = C / (2 pi). In this case we find that r = 14 pi m / (2 pi) = (14/2) * (pi/pi) m = 7 * 1 m = 7 m. We use this to find the area A = pi * (7 m)^2 = 49 pi m^2.
.................................................
......!!!!!!!!...................................
18:26:06 `questionNumber 10000 `q011. What is the radius of circle whose area is 78 square meters?
......!!!!!!!!...................................
RESPONSE --> no clue confidence assessment: 0
.................................................
......!!!!!!!!...................................
18:26:18 01-20-2009 18:26:18 Knowing that A = pi r^2 we solve for r. We first divide both sides by pi to obtain A / pi = r^2. We then reverse the sides and take the square root of both sides, obtaining r = sqrt( A / pi ). Note that strictly speaking the solution to r^2 = A / pi is r = +-sqrt( A / pi ), meaning + sqrt( A / pi) or - sqrt(A / pi). However knowing that r and A are both positive quantities, we can reject the negative solution. Now we substitute A = 78 m^2 to obtain r = sqrt( 78 m^2 / pi) = sqrt(78 / pi) m.{} Approximating this quantity to 2 significant figures we obtain r = 5.0 m.
......!!!!!!!!...................................
NOTES -------> Knowing that A = pi r^2 we solve for r. We first divide both sides by pi to obtain A / pi = r^2. We then reverse the sides and take the square root of both sides, obtaining r = sqrt( A / pi ). Note that strictly speaking the solution to r^2 = A / pi is r = +-sqrt( A / pi ), meaning + sqrt( A / pi) or - sqrt(A / pi). However knowing that r and A are both positive quantities, we can reject the negative solution. Now we substitute A = 78 m^2 to obtain r = sqrt( 78 m^2 / pi) = sqrt(78 / pi) m. Approximating this quantity to 2 significant figures we obtain r = 5.0 m.
.................................................
......!!!!!!!!...................................
18:26:46 `questionNumber 10000 `q012. Summary Question 1: How do we visualize the area of a rectangle?
......!!!!!!!!...................................
RESPONSE --> its the length of the legs times each other confidence assessment: 1
.................................................
......!!!!!!!!...................................
18:27:00 `questionNumber 10000 We visualize the rectangle being covered by rows of 1-unit squares. We multiply the number of squares in a row by the number of rows. So the area is A = L * W.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 0
.................................................
......!!!!!!!!...................................
18:27:58 `questionNumber 10000 `q013. Summary Question 2: How do we visualize the area of a right triangle?
......!!!!!!!!...................................
RESPONSE --> (1/2) b*h confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:28:07 `questionNumber 10000 We visualize two identical right triangles being joined along their common hypotenuse to form a rectangle whose length is equal to the base of the triangle and whose width is equal to the altitude of the triangle. The area of the rectangle is b * h, so the area of each triangle is 1/2 * b * h.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
18:28:45 `questionNumber 10000 `q014. Summary Question 3: How do we calculate the area of a parallelogram?
......!!!!!!!!...................................
RESPONSE --> b*h confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:28:54 `questionNumber 10000 The area of a parallelogram is equal to the product of its base and its altitude. The altitude is measured perpendicular to the base.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
18:29:54 `questionNumber 10000 `q015. Summary Question 4: How do we calculate the area of a trapezoid?
......!!!!!!!!...................................
RESPONSE --> b1+b2/2 confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:30:08 `questionNumber 10000 We think of the trapezoid being oriented so that its two parallel sides are vertical, and we multiply the average altitude by the width.
......!!!!!!!!...................................
RESPONSE --> self critique assessment:
.................................................
......!!!!!!!!...................................
18:30:42 `questionNumber 10000 `q016. Summary Question 5: How do we calculate the area of a circle?
......!!!!!!!!...................................
RESPONSE --> pie x radius squared confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:30:52 `questionNumber 10000 We use the formula A = pi r^2, where r is the radius of the circle.
......!!!!!!!!...................................
RESPONSE --> self critique assessment: 3
.................................................
......!!!!!!!!...................................
18:32:15 `questionNumber 10000 `q017. Summary Question 6: How do we calculate the circumference of a circle? How can we easily avoid confusing this formula with that for the area of the circle?
......!!!!!!!!...................................
RESPONSE --> cicumference is the distance around C= pie x distance confidence assessment: 3
.................................................
......!!!!!!!!...................................
18:32:29 `questionNumber 10000 We use the formula C = 2 pi r. The formula for the area involves r^2, which will give us squared units of the radius. Circumference is not measured in squared units.
......!!!!!!!!...................................
RESPONSE --> self critique assessment:
.................................................
......!!!!!!!!...................................
18:33:07 `questionNumber 10000 `q018. Explain how you have organized your knowledge of the principles illustrated by the exercises in this assignment.
......!!!!!!!!...................................
RESPONSE --> wrote down all of the formulas required for the excercises confidence assessment: 3
.................................................