qa 04

#$&*

course Phy 201

1:35 p.m. EST 6/13/14

If your solution to stated problem does not match the given solution, you should self-critique per instructions at

http://vhcc2.vhcc.edu/dsmith/geninfo/labrynth_created_fall_05/levl1_22/levl2_81/file3_259.htm

.

Your solution, attempt at solution. If you are unable to attempt a solution, give a phrase-by-phrase interpretation of the problem along with a statement of what you

do or do not understand about it. This response should be given, based on the work you did in completing the assignment, before you look at the given solution.

At the end of this document, after the qa problems (which provide you with questions and solutions), there is a series of Questions, Problems and Exercises.

004. Acceleration

Goals:

Definition of average rate of change of velocity with respect to clock time.

Apply the definition of average rate of change to define acceleration.

Interpret the slope of a velocity vs. clock time graph

(understand the defining characteristic of the v vs. t graph for constant acceleration: not well emphasized at this point)

Describe the v vs t graph of an object with nonuniform acceleration

*********************************************

Question: `q001 Note that there are 13 questions in this assignment.

At a certain instant the speedometer of a car reads 5 meters / second (of course cars in this country generally read speeds in miles per hour and km per hour, not

meters / sec; but they could easily have their faces re-painted to read in meters/second, and we assume that this speedometer has been similarly altered). Exactly 4

seconds later the speedometer reads 25 meters/second (that, incidentally, indicates very good acceleration, as you will understand later). At what average rate is the

speed of the car changing with respect to clock time?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: 25-5m/s / 4s = 5 m/s/s

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

The rate of change of the speed with respect clock time is equal to the change in the speed divided by the change in the clock time. So we must ask, what is the

change in the speed, what is the change in the clock time and what therefore is the rate at which the speed is changing with respect to clock time?

The change in speed from 5 meters/second to 25 meters/second is 20 meters/second. This occurs in a time interval lasting 4 seconds. The average rate of change of the

speed is therefore (20 meters/second)/(4 seconds) = 5 meters / second / second. This means that on the average, per second, the speed changes by 5 meters/second.

STUDENT QUESTION

Would we not have s^2 since we are multiplying s by s?

INSTRUCTOR RESPONSE

That is correct. However in this question I've chosen not to confuse the issue by simplifying the complex fraction m/s/s, which we address separately.

To clarify, m / s / s means, by the order of operations, (m/s) / s, which is (m/s) * (1/s) = m/s^2.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q002. Explain in commonsense terms of the significance for an automobile of the rate at which its velocity changes. Do you think that a car with a more

powerful engine would be capable of a greater rate of velocity change?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: The faster the velocity of a car can change over a interval of time, often the more powerful the engine. It's also more likely to pass a car with of

lower change of velocity. Yes, typically it would have more powerful engine.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

A car whose velocity changes more rapidly will attain a given speed in a shorter time, and will be able to 'pull away from' a car which is capable of only a lesser

rate of change in velocity. A more powerful engine, all other factors (e.g., weight and gearing) being equal, would be capable of a greater change in velocity in a

given time interval.

STUDENT COMMENT:

The significance for an automobile of the rate at which its velocity changes is the amount of speed it takes to travel to a place in a certain amount of time. If one

car is traveling along side another, and they are going to the same location the velocity will be how long it take this car to get to this location going at a speed

other than the other car. If a car with a more powerful engine were to travel the same distance its velocity would be capable of a greater rate if increased speed

occurred.

INSTRUCTOR RESPONSE:

It's necessary here to distinguish between velocity, which is a pretty intuitive concept, and rate of change of velocity, which is much less intuitive and less

familiar.

An object can change velocity at a constant rate, from rest to a very high velocity. All the while the rate of change of velocity with respect to clock time can be

unchanging.

So the rate of change of velocity with respect to clock time has nothing to do with how fast the object is moving, but rather with how quickly the velocity is

changing.

Moving from one location to another, the displacement is the change in position. If the displacement is divided by the time required we get the average rate of change

of position with respect to clock time, or average velocity.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q003. Explain how we obtain the units meters / second / second in our calculation of the rate of change of the car's speed.

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: We take the change in velocity of a given interval, which is in m/s. How fast thing velocity changes over time is m/s/s or velocity (m/s) over time

(m/s/s).

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

When we divide the change in velocity, expressed in meters/second, by the duration of the time interval in seconds, we get units of (meters / second) / second, often

written meters / second / second.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q004. The unit (meters / second) / second is actually a complex fraction, having a numerator which is itself a fraction. Such a fraction can be

simplified by multiplying the numerator by the reciprocal of the denominator. We thus get (meters / second) * (1/ second). What do we get when we multiply these two

fractions?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: m/s/s. We get m * 1 in the numerator and s^2 in the demoninator.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

Multiplying the numerators we get meters * 1; multiplying the denominators we get second * second, which is second^2. Our result is therefore meters * 1 / second^2,

or just meters / second^2. If appropriate you may at this point comment on your understanding of the units of the rate of change of velocity.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q004. If the velocity of an object changes from 10 m/s to -5 m/s during a time interval of 5 seconds, then at what average rate is the velocity changing

with respect to clock time?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: 10 - -5m/s / 5s = -15m/s / 5 = -3m/s/s

@&

10 m/s - -5 m/s is +15 m/s, so your calculation would give you +3 m/s/s.

The correct result is -3 m/s/s, but this doesn't follow from your calculation.

*@

@&

You want to find the change in velocity and the change in clock time both with reference to the same chronological order.

Generally you will subtract the first quantity from the second, which gives you the change in velocity from the first instant to the second.

In this case the change in velocity will therefore be

final vel - initial vel = -5 m/s - 10 m/s = -15 m/s.

*@

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

We see that the velocity changes from 10 meters/second to -5 meters/second, a change of -15 meters / second, during a five-second time interval. A change of -15 m/s

during a 5 s time interval implies an average rate of -15 m/s / (5 s) = -3 (m/s)/ s = -3 m/s^2. This is the same as (-3 m/s) / s, as we saw above. So the velocity is

changing by -3 m/s every second.

STUDENT QUESTION

Do you have to do the step -3 m/s /s. Because I get the same answer not doing that.

INSTRUCTOR RESPONSE

Your solution read ' -5 m/s - 10 m/s = -15 m/s / 5 seconds = -3 m/s '.

Everything was right except the units on your answer. So the answer to you question is 'Yes. It is very important to do that step.'

The final answer in the given solution is '-3 m/s every second', which is not at all the same as saying just '-3 m/s'.

-15 m/s / (5 s) = -3 m/s^2, which means -3 m/s per s or -3 cm/s every second or -3 m/s/s.

-3m/s is a velocity. The question didn't ask for a velocity, but for an average rate of change of velocity.

-3 m/s per second, or -3 m/s every second, or -3 m/s/s, or -3 m/s^2 (all the same) is a rate of change of velocity with respect to clock time.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q005. You should have noted that velocity can be positive or negative, as can the change in velocity or the rate at which velocity changes. The average

rate at which a quantity changes with respect to time over a given time interval is equal to the change in the quantity divided by the duration of the time interval.

In this case we are calculating the average rate at which the velocity changes. If v represents velocity then we we use `dv to represent the change in velocity and

`dt to represent the duration of the time interval. What expression do we therefore use to express the average rate at which the velocity changes?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: aAve = 'dv/'dt. The means avg velocity equal the change in velocity over a given time interval.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

The average rate would be expressed by [ave rate of velocity change with respect to clock time] = `dv / `dt. The expression [ave rate of velocity change with

respect to clock time] is pretty cumbersome so we give it a name. The name we give it is 'average acceleration', abbreviated by the letter aAve. Using a to

represent acceleration, write down the definition of average acceleration. The definition of average acceleration is aAve = `dv / `dt. Please make any comments you

feel appropriate about your understanding of the process so far.

STUDENT COMMENT:

It’s average velocity so it would be aAve.

INSTRUCTOR RESPONSE:

Good, but note:

It’s average acceleration (not average velocity) so it would be aAve.

In most of your course acceleration is constant, so initial accel = final accel = aAve.

In this case we can just use 'a' for the acceleration.

STUDENT QUESTION

If I understand this correctly, the average rate in which velocity changes is acceleration???? Where did average

acceleration fit into the problem, the problem asked for the average rate that velocity changed?

INSTRUCTOR RESPONSE

Acceleration is rate of change of velocity with respect to clock time. So the terms 'average acceleration' and 'average rate of change of velocity with respect to

clock time' are identical. The term 'average rate of change of velocity' actually leaves off the 'with respect to clock time', but in the context of uniformly

accelerated motion 'average rate of change of velocity' is understood to mean 'average rate of change of velocity with respect to clock time' .

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q006. If a runner is moving at 6 meters / sec at clock time t = 1.5 sec after starting a race, and at 9 meters / sec at clock time t = 3.5 sec after

starting, then what is the average acceleration of the runner between these two clock times?

If you can, answer the question as posed. If not, first consider the two questions below:

What is the change `dv in the velocity of the runner during the time interval, and what is the change `dt in clock time during this interval?

What therefore is the average rate at which the velocity is changing with respect to clock time during this time interval?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: (9-6m/s) / (3.5-1.5s) = 3m/s / 2s = 1.5m/s/s

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

We see that the runner's velocity changes from 6 meters/second to 9 meters/second, a change of `dv = 9 m/s - 6 m/s = 3 m/s, during a time interval lasting from t = 1.5

sec to t = 3.5 sec.

The duration of the interval is `dt = 3.5 s - 1.5 s = 2.0 s.

The rate at which the velocity changes is therefore 3 m/s / (2.0 s) = 1.5 m/s^2.

STUDENT QUESTION

I'm not understanding why you have the power of 2 for.

INSTRUCTOR RESPONSE

When you divide m/s by s you do the algebra of the fractions and get m/s^2. You don't get m/s.

The distinction is essential:

m/s^2 is a unit of acceleration.

m/s is a unit of velocity.

Velocity and acceleration are two completely different aspects of motion.

The algebra of dividing m/s by s was given in a previous question in this document. In a nutshell, (m/s) / s = (m/s) * (1/s) = m/s^2.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q007. On a graph of velocity vs. clock time, we can represent the two events of this problem by two points on the graph. The first point will be (1.5

sec, 6 meters/second) and the second point will be (3.5 sec, 9 meters / sec). What is the run between these points and what does it represent?

What is the rise between these points what does it represent?

What does the slope between these points what does it represent?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: The run is the change in velocity between the two time intervals, which is 3m/s. The run is the change in time between the two time intervals, which is

2 s. The slope is the acceleration, which is 1.5m/s/s.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

The rise from the first point to the second is from 6 meters/second to 9 meters/second, or 3 m/s. This represents the change `dv in velocity. The run is from 1.5

seconds to 3.5 seconds, or 2 seconds, and represents the change `dt in clock time. The slope, being the rise divided by the run, is 3 m/s / (2 sec) = 1.5 m/s^2. This

slope represents `dv / `dt, which is the average acceleration during the time interval. You may if you wish comment on your understanding to this point.

STUDENT QUESTION

Are we going to use the terms acceleration and average acceleration interchangeably in this course? I just want to make sure

I understand.

INSTRUCTOR RESPONSE

Good question.

The term 'acceleration' refers to instantaneous acceleration, the acceleration at a given instant.

The term 'average acceleration' refers to the average acceleration during an interval, calculated by subtracting initial from final velocity and dividing by the change

in clock time.

If acceleration is uniform, it's always the same. If acceleration is uniform, then, it is unchanging. In that case the instantaneous acceleration at any instant is

equal to the average acceleration over any interval.

So when acceleration is uniform, 'acceleration' and 'average acceleration' are the same and can be used interchangeably.

Acceleration isn't always uniform, so before using the terms interchangeably you should be sure you are in a situation where acceleration is expected to be uniform.

This can be visualized in terms of graphs:

The instantaneous acceleration can be represented by the slope of the line tangent to the graph of v vs. t, at the point corresponding to the specified instant.

The average acceleration can be represented by the average slope between two points on a graph of v vs. t.

If acceleration is uniform then the slope of the v vs. t graph is constant--i.e., the v vs. t graph is a straight line, and between any two points of the straight line

the slope is the same. In this case the tangent line at a point on the graph is just the straight-line graph itself.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q008. In what sense does the slope of any graph of velocity vs. clock time represent the acceleration of the object? For example, why does a greater

slope imply greater acceleration?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: A steeper slope implies greater acceleration compared to a less steep slope. This is because the velocity changes more in a given time interval with a

steeper slope.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

Since the rise between two points on a graph of velocity vs. clock time represents the change in `dv velocity, and since the run represents the change `dt clock time,

the slope represents rise / run, or change in velocity /change in clock time, or `dv / `dt. This is the definition of average acceleration.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q009. This is the same situation as in the preceding problem: An automobile coasts down a hill with a constant slope. At first its velocity increases at

a very nearly constant rate. After it attains a certain velocity, air resistance becomes significant and the rate at which velocity changes decreases, though the

velocity continues to increase. Describe a graph of velocity vs. clock time for this automobile (e.g., neither increasing nor decreasing; increasing at an increasing

rate, a constant rate, a decreasing rate; decreasing at an increasing, constant or decreasing rate; the description could be different for different parts of the

graph).

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: At first the velocity and the line in the graph is increasing at a constant rate (line rising from left to right with constant slope) because the

velocity in increasing a nearly constant rate. Then as air resistance becomes a factor, the line continues to rise but at a less steep slope than before as the

velocity increases at a decreasing rate.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

Your graph should have velocity as the vertical axis and clock time as the horizontal axis. The graph should be increasing since the velocity starts at zero and

increases. At first the graph should be increasing at a constant rate, because the velocity is increasing at a constant rate. The graph should continue increasing by

after a time it should begin increasing at a decreasing rate, since the rate at which the velocity changes begins decreasing due to air resistance. However the graph

should never decrease, although as air resistance gets greater and greater the graph might come closer and closer to leveling off. Critique your solution by

describing or insights you had or insights you had and by explaining how you now know how to avoid those errors.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

*********************************************

Question: `q010. An automobile coasts down a hill with a constant slope. At first its velocity increases at a very nearly constant rate. After it attains a certain

velocity, air resistance becomes significant and the rate at which velocity changes decreases, though the velocity continues to increase. Describe a graph of

acceleration vs. clock time for this automobile (e.g., neither increasing nor decreasing; increasing at an increasing rate, a constant rate, a decreasing rate;

decreasing at an increasing, constant or decreasing rate; the description could be different for different parts of the graph).

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: If velocity is changing at a constant rate, it's acceleration would be the same over a given period of time, let's say 3 m/s/s over the first 30 seconds

for example. This part of the graph/line for the acceleration/time graph would be a straight horizontal line that is neither increasing nor decreasing. After air

resistance becomes a factor, as the velocity change decreases, acceleration decreases, so the line would be decreasing or falling from left to right.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.............................................

Given Solution:

Your graph should have acceleration as the vertical axis and clock time as the horizontal axis. At first the graph should be neither increasing nor decreasing, since

it first the acceleration is constant. Then after a time the graph should begin decreasing, which indicates the decreasing rate at which velocity changes as air

resistance begins having an effect. An accurate description of whether the graph decreases at a constant, increasing or decreasing rate is not required at this point,

because the reasoning is somewhat complex and requires knowledge you are not expected to possess at this point. However it is noted that the graph will at first

decrease more and more rapidly, and then less and less rapidly as it approaches the t axis.

STUDENT QUESTION: Can you clarify some more the differences in acceleration and velocity?

INSTRUCTOR RESPONSE: ** Velocity is the rate at which position changes and the standard units are cm/sec or m/sec.

Acceleration is the rate at which velocity changes and its standard units are cm/s^2 or m/s^2.

Velocity is the slope of a position vs. clock time graph.

Acceleration is the slope of a velocity vs. clock time graph. **

STUDENT QUESTION:

In the problem it states that velocity continues to increase even though the rate at which velocity changes decreases.

I don’t understand your the slope will decrease if this is true. I can understand a diminish in velocity and time, but not a down turn of the slope, which is what your

solution leans to.

INSTRUCTOR RESPONSE

Your thinking is good, but you need carefully identify what it is you're describing.

The question here concerns the acceleration vs. clock time graph, whereas most of your comments apply to the velocity vs. clock time graph.

Under these conditions the slope of the velocity vs. clock time graph will decrease, this will occur as long as the acceleration vs. clock time graph decreases,

regardless of whether that decrease is at a constant, an increasing or a decreasing rate.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

If you understand the assignment and were able to solve the previously given problems from your worksheets, you should be able to complete most of the following

problems quickly and easily. If you experience difficulty with some of these problems, you will be given notes and we will work to resolve difficulties.

*********************************************

Question: `q011. Which changes its velocity more quickly, on the average, a car which speeds up from 50 mph to 60 mph in 5 seconds, or a car which speeds up from 5

mph to 25 mph in 6 seconds?

Be sure to explain your answer.

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: The car that speeds up from 5 to 25 mph in 6 seconds because there's a much greater change in velocity than the first example. It has a greater time

interval than the first one, but a much greater change in velocity 20 mph, compared with 10 mph. I could convert this into miles or meters per second for a real

numbers to numbers comparison, but not sure that's what you want.

@&

Don't worry about what I want. Tell me what you think is the best and most complete answer to the question.

*@

@&

In this case it would be appropriate to find the rates of velocity change with respect to clock time and compare them.

Velocities and clock times are given in the same units for both cars, so there is no need to convert the units.

One of the rates would be 2 mph / second. Which would this be, and how does it compare to the rate for the other vehicle?

*@

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

*********************************************

Question: `q012. What do we get if we divide 40 meters by 5 meters / second?

Your answer will include a number and its units. You should explain how you got the units of your answer.

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: 8s. You can do this 40m / 5m/s and cross out the meters and get seconds or do this, 40m * s/5m and cross out the meters again and get 8 seconds. This

problem is like saying, if I travel 40m at a velocity of 5m/s, how long will it take me?

@&

Very good.

*@

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

*********************************************

Question: `q013. On a graph of velocity v vs. clock time t we have the two points (5 s, 10 m/s) and (10 s, 20 m/s). What is the average slope of the graph between

these points, and what does this average slope mean?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

Your solution: +10m/s / 5s = 2m/s/s. This is the slope or acceleration.

confidence rating #$&*:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Self-critique (if necessary):

------------------------------------------------

Self-critique rating:

@&

Very good. It appears that you are catching on nicely.

Check my inserted notes and let me know if you have questions.

*@